Can't Host / Can't Connect to Battle.net and Other Common Fixes

Status
Not open for further replies.
O

oscar

Guest
stupid router/me

Hey
My router doesn't have a special mark, but when i get to the router's firewall section where u allow ports and stuff, it says i need an IP with 6 digits and i dont know what to do, pls help
 
S

steve45377

Guest
Can't host WC3

Hello Everyone,
I have tried to all of the known fixes to allow you to host i WarCraft III, like port forwarding, opening ports, turning off firewalls, etc. Nothing works. I have done a traceroute and was hoping some one could translate it in to English for me. Well I'll paste it here, Thanks for any help any one can provide!

---

traceroute to useast.battle.net (63.240.202.139) ,30 hops max,40 byte packet
1 216.166.206.129 (216.166.206.129) 20. 0 ms 10. 0 ms 10. 0 ms
2 64.40.64.1 (64.40.64.1) 10. 0 ms 10. 0 ms 10. 0 ms
3 66.79.82.2 (66.79.82.2) 40. 0 ms 40. 0 ms 40. 0 ms
4 64.94.2.61 (64.94.2.61) 40. 0 ms 40. 0 ms *
5 * * * Request timed out.
6 12.86.102.5 (12.86.102.5) * * 40. 0 ms
7 12.122.85.146 (12.122.85.146) 60. 0 ms 60. 0 ms 60. 0 ms
8 12.122.17.17 (12.122.17.17) 60. 0 ms 60. 0 ms 70. 0 ms
9 12.122.1.174 (12.122.1.174) 60. 0 ms 60. 0 ms 60. 0 ms
10 12.122.16.110 (12.122.16.110) 70. 0 ms 60. 0 ms 60. 0 ms
11 12.123.8.21 (12.123.8.21) 60. 0 ms 60. 0 ms 60. 0 ms
12 12.122.255.50 (12.122.255.50) 60. 0 ms 60. 0 ms 70. 0 ms
13 63.240.193.10 (63.240.193.10) 60. 0 ms 60. 0 ms 60. 0 ms
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
Traceroute Complete.
 

niceone

New Member
Reaction score
3
hey

if ya cant host even if ya done everything up there try opening ports at ur modem and router :)
 
G

Grakelin

Guest
Recently I switched my ISP from Rogers to Aliant. My hosting stopped working. D:

So, I go through my router, set the right ports, check my firewall, the exceptions are in good order. I find out while I'm doing all this that my computer had accidentally been hooking to the internet without the router for a little while, so I don't think my problem lies there.

Sadly, nothing seems to work. Is there something I'm missing? Again, my router and windows firewall are set up properly, as I've done this process successfully many times in the past.
 
G

Grakelin

Guest
Yep, I'm using a static IP. I'm totally lost as to what the problem may be.
 
C

Craw

Guest
HI, thanks for the guide, but I have a problem.

I am using 2 routers together for my computer, and when I tried to configure the second one, I cannot access it in my browser because the other one takes precedence. Is there a way to get around this?

Thanks
 
D

direland

Guest
help

i am not able to connect to battle.net...whenever i try it always says, "Unable to connect to battle.net. you may be trying to connect to an invalid server. if you are using a modem you may need to manually connect to the internet before connecting to battle.net"


what does that mean??
 
V

victorycy

Guest
i still have trouble hosting

i did open all the port, but i still can not host. and you said
"Do you have multiple computers using the same external IP address (LAN)?
You must use ports consecutively to allow this to work.
For example: You have internal IPs of 168.192.1.100 and 168.192.1.101.
The first IP 168.192.1.100 would need port 6112, the next IP 168.192.1.101 would need port 6113. "

i am having more then 6 computer in my family, does it mean i need to allow port on all of them????

also what do you mean by test it? i do not know how to test. the reason i know i can not host is that after i creat a game for 10 mins, no one ever joined....


help help please


thx
 

konerboy

Run piggy Run!
Reaction score
95
yeah you need to open a port for each computer you want to play on, and give it the specific

and Some ISP's dosn't support ports so you might not have one, can you create without a router?? like with dirrect internet from modem/hole in the wall.

this website is a little better for learning how to open ports

PortFoward.com Guides by router
 
V

victorycy

Guest
yeah you need to open a port for each computer you want to play on, and give it the specific

and Some ISP's dosn't support ports so you might not have one, can you create without a router?? like with dirrect internet from modem/hole in the wall.

this website is a little better for learning how to open ports

PortFoward.com Guides by router

i really do not want to use portfoward, because it is not free... i only play on one computer, but there are 6 more computer in my home, so do i need to open ports on those computers?
 

konerboy

Run piggy Run!
Reaction score
95
i really do not want to use portfoward, because it is not free... i only play on one computer, but there are 6 more computer in my home, so do i need to open ports on those computers?

yeah you need to open the port for the computer you want to play on.

the link is a free guide you can follow, pick your router then pick Wc3 then it helps you .. no fee's.

and could you create if you made a connection directly from you modem/hole in the wall, into your computer?? without the router?
 
M

maxdudemax

Guest
i really need help:banghead:

ive tried hosting and it never works.:mad: I also tried it with the firewall off and still nobody comes!!!!!:banghead:


I need help
 
V

victorycy

Guest
yeah you need to open the port for the computer you want to play on.

the link is a free guide you can follow, pick your router then pick Wc3 then it helps you .. no fee's.

and could you create if you made a connection directly from you modem/hole in the wall, into your computer?? without the router?

sorry, but one more question..

i have having an linksys wrt54g v8, however, it list on protforwarding do not have think link, they have wrt54g v5.v4.v3 etc, just do not have v8....


what should i do?????


thx
 
V

victorycy

Guest
yeah you need to open the port for the computer you want to play on.

the link is a free guide you can follow, pick your router then pick Wc3 then it helps you .. no fee's.

and could you create if you made a connection directly from you modem/hole in the wall, into your computer?? without the router?

i will make it more clear

the thing connect to the wall (is it the modem?) is motorola SB5100, then the thing connect to the motorola thing ( the roter??) is linksys WRT54G, my computer do not have wireless itself, so there is this thing provide me with wireless, and it is D-LINK DWL-G122

WHICH ONE SHOULD I FORWARD WITH?????????????????????

THX A LOT
 
A

AcMilan91

Guest
Starcraft PRoblem

Please help me!!!i have fast net,and i have badly lags,i forwarded ports and nothing,when i create nobody joins my game,wheni join i lag so much!!!can't even play!!!i have dsl...:banghead:
 

Dtere

Administrator
Reaction score
22
Updated links and patch related information. Also deleted dead links in the main thread.
 

jonagoo

New Member
Reaction score
2
i have done everything imaginable for my router and computer. i have fowarded all the ports, 6112-6119, and ive allowed exeptions in my windows fireall for the ports and warIII, ive even turned off firewall and router and connected my computer directly through the modem and into the wall on both my xp and vista computers but all to no avail if any1 knows whats wrong with it then plz help i have it running on xpservice pack 2 on both (vista only works on that) and i have embarq DSL internet with a 660 series modem. please help me host i would love to sometime for i have made countless games
 
Status
Not open for further replies.
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1
  • The Helper The Helper:
    New recipe is another summer dessert Berry and Peach Cheesecake - https://www.thehelper.net/threads/recipe-berry-and-peach-cheesecake.194169/

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top