Phipscube
New Member
- Reaction score
- 16
I finally got a logitech controller for a reasonable price, but quickly found out how useless the analogue stick is due to there not being enough travel.
I followed a guide on nuon dome that suggests making the stick thinner which I thought would be a much nicer solution than making the hole in the casing bigger. Plus I have an old wingman pad hanging around that has the exact same stick in it. I can keep the original safe and hack the wingman stick instead
There is an inner thinner stick buried inside the outer part of the stick and its just a matter of carefully cutting the outer away to reveal it
About 1 hour of cutting, snipping and filing later I was done and now the controller works great!
Here's some photos of my attempt:
I followed a guide on nuon dome that suggests making the stick thinner which I thought would be a much nicer solution than making the hole in the casing bigger. Plus I have an old wingman pad hanging around that has the exact same stick in it. I can keep the original safe and hack the wingman stick instead
There is an inner thinner stick buried inside the outer part of the stick and its just a matter of carefully cutting the outer away to reveal it
About 1 hour of cutting, snipping and filing later I was done and now the controller works great!
Here's some photos of my attempt:
Attachments
-
20211026_204738.jpg2.5 MB · Views: 129
-
20211026_204904.jpg855.1 KB · Views: 134
-
20211026_211210.jpg2.7 MB · Views: 130
-
20211026_212618.jpg1.6 MB · Views: 137
-
20211026_212635.jpg2.4 MB · Views: 142
-
20211026_213542.jpg2.6 MB · Views: 132
-
20211026_215138.jpg859 KB · Views: 131
-
20211026_215128.jpg1 MB · Views: 127
-
20211026_215158.jpg820.3 KB · Views: 133
-
20211026_215220.jpg3.1 MB · Views: 134