- Reaction score
- 1,678
Update: iFixit testing has found that Apple’s software locks are not yet operative. “This service document certainly paints a grim picture, but ever the optimists, we headed down to our friendly local Apple Store and bought a brand new 2018 13” MacBook Pro Touch Bar unit. Then we disassembled it and traded displays with our teardown unit from this summer. To our surprise, the displays and MacBooks functioned normally in every combination we tried. We also updated to Mojave andswapped logic boards with the same results.
That’s a promising sign, and it means the sky isn’t quite falling—yet.”
iFixit concludes that Apple has a “kill switch” in the new MacBook Pros. The service bulletin Apple sent to AASPs is genuine, but is not yet operational.
-----------------------------------------------------------------------
The original story follows below:
Apple has introduced software locks that will effectively prevent independent and third-party repair on 2018 MacBook Pro computers, according to internal Apple documents obtained by Motherboard. The new system will render the computer “inoperative” unless a proprietary Apple “system configuration” software is run after parts of the system are replaced.
According to the document, which was distributed to Apple’s Authorized Service Providers late last month, this policy will apply to all Apple computers with the “T2” security chip, which is present in 2018 MacBook Pros as well as the iMac Pro.
The software lock will kick in for any repair which involves replacing a MacBook Pro’s display assembly, logic board, top case (the keyboard, touchpad, and internal housing), and Touch ID board. On iMac Pros, it will kick in if the Logic Board or flash storage are replaced. The computer will only begin functioning again after Apple or a member of one of Apple’s Authorized Service Provider repair program runs diagnostic software called Apple Service Toolkit 2.
“For Macs with the Apple T2 chip, the repair process is not complete for certain parts replacements until the AST 2 System Configuration suite has been run. Failure to perform this step will result in an inoperative system and an incomplete repair,” the document reads. MacRumors reported the new policy earlier today.
Read more here. (Motherboard)
That’s a promising sign, and it means the sky isn’t quite falling—yet.”
iFixit concludes that Apple has a “kill switch” in the new MacBook Pros. The service bulletin Apple sent to AASPs is genuine, but is not yet operational.
-----------------------------------------------------------------------
The original story follows below:
Apple has introduced software locks that will effectively prevent independent and third-party repair on 2018 MacBook Pro computers, according to internal Apple documents obtained by Motherboard. The new system will render the computer “inoperative” unless a proprietary Apple “system configuration” software is run after parts of the system are replaced.
According to the document, which was distributed to Apple’s Authorized Service Providers late last month, this policy will apply to all Apple computers with the “T2” security chip, which is present in 2018 MacBook Pros as well as the iMac Pro.
The software lock will kick in for any repair which involves replacing a MacBook Pro’s display assembly, logic board, top case (the keyboard, touchpad, and internal housing), and Touch ID board. On iMac Pros, it will kick in if the Logic Board or flash storage are replaced. The computer will only begin functioning again after Apple or a member of one of Apple’s Authorized Service Provider repair program runs diagnostic software called Apple Service Toolkit 2.
“For Macs with the Apple T2 chip, the repair process is not complete for certain parts replacements until the AST 2 System Configuration suite has been run. Failure to perform this step will result in an inoperative system and an incomplete repair,” the document reads. MacRumors reported the new policy earlier today.
Read more here. (Motherboard)
