Buff comparison and the related problem.

xAnaMorphine

Active Member
Reaction score
43
Hello everyone,

I have a problem concerning a simple buff comparison and unit group function.
The debug message shows that there are 0 units in the unit group.
Any solution?
My trigger look like these:

Trigger:
  • Ice Cold
    • Events
      • Unit - A unit Starts the effect of an ability
    • Conditions
      • (Ability being cast) Equal to Ice Cold (Archmage - Skill)
    • Actions
      • Set IceColdLoc = (Target point of ability being cast)
      • Set IceColdDegree = 0.00
      • For each (Integer A) from 1 to 60, do (Actions)
        • Loop - Actions
          • Destructible - Create a Ice Cold (Pathing Blocker) at (IceColdLoc offset by 400.00 towards IceColdDegree degrees) facing (Random angle) with scale 1.00 and variation 0
          • Set IceColdDegree = (IceColdDegree + (360.00 / (Real((Integer A)))))
      • Game - Display to (All players) the text: (Number of Units in IceColdTarget: + (String((Number of units in IceColdTarget))))
      • Unit Group - Pick every unit in (Units within 800.00 of IceColdLoc) and do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • ((Picked unit) has buff Ice Cold ) Equal to True
            • Then - Actions
              • Unit Group - Add (Picked unit) to IceColdTarget
            • Else - Actions
      • Game - Display to (All players) the text: (Number of Units in IceColdTarget: + (String((Number of units in IceColdTarget))))
      • Countdown Timer - Start IceColdTimer as a One-shot timer that will expire in 3.00 seconds
 

Juggernaut

I don't know what to change it to
Reaction score
33
what is IceColdTarget ? you haven't declared it in the trigger.

maybe you need to set IceColdTarget = units within 800 range
and then swap that with IceColdTarget
 

Juggernaut

I don't know what to change it to
Reaction score
33
yes, but you haven't declared it in this trigger. or is it declared somewhere else ?
 

xAnaMorphine

Active Member
Reaction score
43
Afaik it doesn't matter.
I used something similiar to your solution:

Trigger:
  • Set IceColdTarget = (Units within 800.00 of IceColdLoc matching (((Matching unit) has buff Ice Cold ) Equal to True))


However, it doesn't work either.
 

KaerfNomekop

Swim, fishies. Swim through the veil of steel.
Reaction score
612
Maybe the buff isn't applied when the unit starts the effect of the ability? You might need damage detection for this, as Finishes casting an ability won't give you the targeted location.
 

xAnaMorphine

Active Member
Reaction score
43
The units do have the buff for the full duration of the trigger and the location is the right one.
 

KaerfNomekop

Swim, fishies. Swim through the veil of steel.
Reaction score
612
I mean when the effect fires. Starts the effect of an ability most likely fires before the buff(s) get placed on the unit(s). I'm sure damage detection works, because I use it in my own system.
 

vypur85

Hibernate
Reaction score
803
Not too hard to test this. Remove the buff condition within the unit group. Then check if there is an increase of unit in IceColdTarget. If it does have a number then, it's confirmed that the buff was indeed the problem.
 

xAnaMorphine

Active Member
Reaction score
43
I got it working now.
I moved the buff comparison into another trigger and changed a few things.
If someone wants to take a look at the trigger here it is:

Trigger:
  • Ice Cold
    • Events
      • Unit - A unit Starts the effect of an ability
    • Conditions
      • (Ability being cast) Equal to Ice Cold (Archmage - Skill)
    • Actions
      • Set IceColdCaster = (Casting unit)
      • Set IceColdLoc = (Target point of ability being cast)
      • Set IceColdDegree = 0.00
      • For each (Integer A) from 1 to 60, do (Actions)
        • Loop - Actions
          • Destructible - Create a Ice Cold (Pathing Blocker) at (IceColdLoc offset by 400.00 towards IceColdDegree degrees) facing (Random angle) with scale 1.00 and variation 0
          • Set IceColdDegree = (IceColdDegree + (360.00 / (Real((Integer A)))))
      • Countdown Timer - Start IceColdTimer as a One-shot timer that will expire in 3.00 seconds


Trigger:
  • Ice Cold Effekt
    • Events
      • Time - IceColdTimer expires
    • Conditions
    • Actions
      • Unit Group - Pick every unit in (Units within 800.00 of IceColdLoc matching (((Matching unit) has buff Ice Cold ) Equal to True)) and do (Actions)
        • Loop - Actions
          • Unit Group - Add (Picked unit) to IceColdTarget
          • For each (Integer A) from 0 to (Number of units in IceColdTarget), do (Actions)
            • Loop - Actions
              • Unit - Create 1 Dummy for (Owner of IceColdCaster) at IceColdLoc facing Default building facing degrees
              • Unit - Add a 3.00 second Generic expiration timer to (Last created unit)
              • Unit - Add (Frost Nova - Dummy Unit) to (Last created unit)
              • Unit - Order (Last created unit) to Undead Lich - Frost Nova (Picked unit)
      • Destructible - Pick every destructible within 1000.00 of IceColdLoc and do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Destructible-type of (Picked destructible)) Equal to Ice Cold (Pathing Blocker)
            • Then - Actions
              • Destructible - Remove (Picked destructible)
            • Else - Actions
      • Unit Group - Remove all units from IceColdTarget
      • Custom script: call RemoveLocation(udg_IceColdLoc)
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Varine Varine:
    How can you tell the difference between real traffic and indexing or AI generation bots?
  • The Helper The Helper:
    The bots will show up as users online in the forum software but they do not show up in my stats tracking. I am sure there are bots in the stats but the way alot of the bots treat the site do not show up on the stats
  • Varine Varine:
    I want to build a filtration system for my 3d printer, and that shit is so much more complicated than I thought it would be
  • Varine Varine:
    Apparently ABS emits styrene particulates which can be like .2 micrometers, which idk if the VOC detectors I have can even catch that
  • Varine Varine:
    Anyway I need to get some of those sensors and two air pressure sensors installed before an after the filters, which I need to figure out how to calculate the necessary pressure for and I have yet to find anything that tells me how to actually do that, just the cfm ratings
  • Varine Varine:
    And then I have to set up an arduino board to read those sensors, which I also don't know very much about but I have a whole bunch of crash course things for that
  • Varine Varine:
    These sensors are also a lot more than I thought they would be. Like 5 to 10 each, idk why but I assumed they would be like 2 dollars
  • Varine Varine:
    Another issue I'm learning is that a lot of the air quality sensors don't work at very high ambient temperatures. I'm planning on heating this enclosure to like 60C or so, and that's the upper limit of their functionality
  • Varine Varine:
    Although I don't know if I need to actually actively heat it or just let the plate and hotend bring the ambient temp to whatever it will, but even then I need to figure out an exfiltration for hot air. I think I kind of know what to do but it's still fucking confusing
  • The Helper The Helper:
    Maybe you could find some of that information from AC tech - like how they detect freon and such
  • Varine Varine:
    That's mostly what I've been looking at
  • Varine Varine:
    I don't think I'm dealing with quite the same pressures though, at the very least its a significantly smaller system. For the time being I'm just going to put together a quick scrubby box though and hope it works good enough to not make my house toxic
  • Varine Varine:
    I mean I don't use this enough to pose any significant danger I don't think, but I would still rather not be throwing styrene all over the air
  • The Helper The Helper:
    New dessert added to recipes Southern Pecan Praline Cake https://www.thehelper.net/threads/recipe-southern-pecan-praline-cake.193555/
  • The Helper The Helper:
    Another bot invasion 493 members online most of them bots that do not show up on stats
  • Varine Varine:
    I'm looking at a solid 378 guests, but 3 members. Of which two are me and VSNES. The third is unlisted, which makes me think its a ghost.
    +1
  • The Helper The Helper:
    Some members choose invisibility mode
    +1
  • The Helper The Helper:
    I bitch about Xenforo sometimes but it really is full featured you just have to really know what you are doing to get the most out of it.
  • The Helper The Helper:
    It is just not easy to fix styles and customize but it definitely can be done
  • The Helper The Helper:
    I do know this - xenforo dropped the ball by not keeping the vbulletin reputation comments as a feature. The loss of the Reputation comments data when we switched to Xenforo really was the death knell for the site when it came to all the users that left. I know I missed it so much and I got way less interested in the site when that feature was gone and I run the site.
  • Blackveiled Blackveiled:
    People love rep, lol
    +1
  • The Helper The Helper:
    The recipe today is Sloppy Joe Casserole - one of my faves LOL https://www.thehelper.net/threads/sloppy-joe-casserole-with-manwich.193585/
  • The Helper The Helper:
    Decided to put up a healthier type recipe to mix it up - Honey Garlic Shrimp Stir-Fry https://www.thehelper.net/threads/recipe-honey-garlic-shrimp-stir-fry.193595/

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top