Laptop won't boot properly..

BANANAMAN

Resident Star Battle Expert.
Reaction score
150
Every time I turn on my laptop it automatically goes to the boot menu and it's choices.

This is how I get it to normally boot now:
I try picking the HDD option which results it freezing before it can start the laptop emmits a high pitch noise when it does and I have to manually turn it off.

I turn it on and pick the eSata boot option and it gives me two options to boot it normally or system repair.
I pick boot normally and it loads normally.

One other thing I need to remove all devices plugged into the usb ports for the second step to work.

I've already identified and nuked almost all viruses from the system except a select few due to them being resilient. So I decided to reformat the entire thing.

My friend that's helping me fix it told me it might be a hardware problem besides the obvious virus problem.

What do you guys think?
 

MrBrooks

Brooooooooooown!
Reaction score
24
It's a hardware failure. I had the same problem with my old laptop. During a file transfer it BSoD'd on me and when I tried to boot it, it would go to the BIOS menu and asking me what device I wanted to boot from. I chose the HDD and it would come up with the "Windows is loading files" and then show a screen that said "Please insert a removable medium or bootable drive". Inevitably it came down to it being a hard drive failure.

That's my experience and to me it sounds like hardware problem. Most likely hard drive. Worst case scenario is it's the motherboard but I very much doubt it.
 

The Helper

Necromancy Power over 9000
Staff member
Reaction score
1,697
I agree with Mr Brooks here. It sounds like a hardware problem. You might want to take a look at your hard drive for you laptop to make sure that it is seated properly. Try taking it out and putting it back in.
 

MrBrooks

Brooooooooooown!
Reaction score
24
I agree with Mr Brooks here. It sounds like a hardware problem. You might want to take a look at your hard drive for you laptop to make sure that it is seated properly. Try taking it out and putting it back in.

Also make sure the wires are in securely and none are damaged. If you have a spare internal hard drive with an OS on, try plugging that in and see if it does it first time with no errors.
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Varine Varine:
    How can you tell the difference between real traffic and indexing or AI generation bots?
  • The Helper The Helper:
    The bots will show up as users online in the forum software but they do not show up in my stats tracking. I am sure there are bots in the stats but the way alot of the bots treat the site do not show up on the stats
  • Varine Varine:
    I want to build a filtration system for my 3d printer, and that shit is so much more complicated than I thought it would be
  • Varine Varine:
    Apparently ABS emits styrene particulates which can be like .2 micrometers, which idk if the VOC detectors I have can even catch that
  • Varine Varine:
    Anyway I need to get some of those sensors and two air pressure sensors installed before an after the filters, which I need to figure out how to calculate the necessary pressure for and I have yet to find anything that tells me how to actually do that, just the cfm ratings
  • Varine Varine:
    And then I have to set up an arduino board to read those sensors, which I also don't know very much about but I have a whole bunch of crash course things for that
  • Varine Varine:
    These sensors are also a lot more than I thought they would be. Like 5 to 10 each, idk why but I assumed they would be like 2 dollars
  • Varine Varine:
    Another issue I'm learning is that a lot of the air quality sensors don't work at very high ambient temperatures. I'm planning on heating this enclosure to like 60C or so, and that's the upper limit of their functionality
  • Varine Varine:
    Although I don't know if I need to actually actively heat it or just let the plate and hotend bring the ambient temp to whatever it will, but even then I need to figure out an exfiltration for hot air. I think I kind of know what to do but it's still fucking confusing
  • The Helper The Helper:
    Maybe you could find some of that information from AC tech - like how they detect freon and such
  • Varine Varine:
    That's mostly what I've been looking at
  • Varine Varine:
    I don't think I'm dealing with quite the same pressures though, at the very least its a significantly smaller system. For the time being I'm just going to put together a quick scrubby box though and hope it works good enough to not make my house toxic
  • Varine Varine:
    I mean I don't use this enough to pose any significant danger I don't think, but I would still rather not be throwing styrene all over the air
  • The Helper The Helper:
    New dessert added to recipes Southern Pecan Praline Cake https://www.thehelper.net/threads/recipe-southern-pecan-praline-cake.193555/
  • The Helper The Helper:
    Another bot invasion 493 members online most of them bots that do not show up on stats
  • Varine Varine:
    I'm looking at a solid 378 guests, but 3 members. Of which two are me and VSNES. The third is unlisted, which makes me think its a ghost.
    +1
  • The Helper The Helper:
    Some members choose invisibility mode
    +1
  • The Helper The Helper:
    I bitch about Xenforo sometimes but it really is full featured you just have to really know what you are doing to get the most out of it.
  • The Helper The Helper:
    It is just not easy to fix styles and customize but it definitely can be done
  • The Helper The Helper:
    I do know this - xenforo dropped the ball by not keeping the vbulletin reputation comments as a feature. The loss of the Reputation comments data when we switched to Xenforo really was the death knell for the site when it came to all the users that left. I know I missed it so much and I got way less interested in the site when that feature was gone and I run the site.
  • Blackveiled Blackveiled:
    People love rep, lol
    +1
  • The Helper The Helper:
    The recipe today is Sloppy Joe Casserole - one of my faves LOL https://www.thehelper.net/threads/sloppy-joe-casserole-with-manwich.193585/
  • The Helper The Helper:
    Decided to put up a healthier type recipe to mix it up - Honey Garlic Shrimp Stir-Fry https://www.thehelper.net/threads/recipe-honey-garlic-shrimp-stir-fry.193595/

      The Helper Discord

      Staff online

      Members online

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top