NUON Controller Promotion! Free NUON Controller contest!

midnight8

NUON & Atari VCS Forum Moderator
Staff member
will try to bump the threads in the forums i posted in tonight, don't wanna do it to much and them think I am a spammer
 

atarigalore

New Member
The controller should go to somebody who can make more controllers. Then we'll all have one:)
if I win, there is a good chance at controllers being much cheaper.. I have 3 logitech controllers and I would trade one for this one. I know I won't get my money back on making the dongles for my friends adapter so this would kinda make up for money lost to make controllers cheaper.

plus to know the full analog range the controller outputs is needed too just in case the logitech even without the outer case can't reach as far as the nuon is capable.
 

The Helper

Necromancy Power over 9000
Staff member
if I win, there is a good chance at controllers being much cheaper.. I have 3 logitech controllers and I would trade one for this one. I know I won't get my money back on making the dongles for my friends adapter so this would kinda make up for money lost to make controllers cheaper.

plus to know the full analog range the controller outputs is needed too just in case the logitech even without the outer case can't reach as far as the nuon is capable.
If you want to do a trade I have another controller I am willing to do that with. I am just trying to get controllers out there it does not matter which one it is.
 

atarigalore

New Member
If you want to do a trade I have another controller I am willing to do that with. I am just trying to get controllers out there it does not matter which one it is.
sure. is it used?.. i ask cause if it's new I will trade you my one logitech that is still sealed.

I really want it to be sure the data it outputs is what the adapter will output just in case it is not identical to the logitech.
 

The Helper

Necromancy Power over 9000
Staff member
I have not used the controller it was not in packaging when I got it that I remember. If the NUANCE guy used it it was minimal. Midnite got one of the the controllers I got from the NUANCE guy and would be the best judge. It is a blue Warrior.
 

atarigalore

New Member
I have not used the controller it was not in packaging when I got it that I remember. If the NUANCE guy used it it was minimal. Midnite got one of the the controllers I got from the NUANCE guy and would be the best judge. It is a blue Warrior.
the one midnight got is a warrior or the one you would trade me.... cause I don't see a point in needing a warrior, I wanted a HPI stealth for the analog to analyze the data and be sure of the full range of the analog output.

if it's the stealth and looks new that's good enough for me, I will give you the sealed nuon logitech analog controller for it.... I just wanted to be sure the analog stick feels tight, I know the stick looks like n64 sticks and when used a lot they are sloppy and no longer output full analog range.
 

midnight8

NUON & Atari VCS Forum Moderator
Staff member
if those damn chips were actually available I would think it would not be that bad to make controllers. I mean there are controllers in the pc market that are nearly identical
 

The Helper

Necromancy Power over 9000
Staff member
Anyway, regardless this contest is still open and I am going to start the Voting soon.
 

sixersfan105

NUON Lover!
I would love to throw my hat in the ring on this controller. I have a Nuon player (Samsung N501) and all of the games but only one controller (Logitech). I have a "little brother" (I'm in the Big Brothers Big Sisters program) and he is very into video games but we've never been able to play Nuon when he's over at my house due to only having one controller. I also can't wait to introduce my son, when he's old enough, to my video game systems, and playing Nuon together will be a non-starter unless and until I've got two controllers. Thanks for the consideration and the efforts made on this forum to keep Nuon alive and relevant!
 

adsap27

New Member
Hey I just found this thread, and im so glad i did to find a passion group like this. So I bought a toshiba nuon 2300 in 2018 and i had bought ballistic not knowing its only for the samsung so i had sold that a while back. Recently I just purchase Iron soldier 3, but I have yet to Find a controller that is reasonable in price. If i were to be chosen I live in the Philadelphia area and once I were to play iron soldier I would be back on the threads to find somebody with the capabilities to create more controllers for everyone( I saw in the threads a couple of people live in philadelphia area). Number 1 thing I can't stand are scalpers, because they ruin for people like in this forum who just want to enjoy our cool little dvd console.
I just thought I would throw my name in last second. Even if i don't get picked i just wanted to say hello to the community! happy I found this
 

The Helper

Necromancy Power over 9000
Staff member
Hey I just found this thread, and im so glad i did to find a passion group like this. So I bought a toshiba nuon 2300 in 2018 and i had bought ballistic not knowing its only for the samsung so i had sold that a while back. Recently I just purchase Iron soldier 3, but I have yet to Find a controller that is reasonable in price. If i were to be chosen I live in the Philadelphia area and once I were to play iron soldier I would be back on the threads to find somebody with the capabilities to create more controllers for everyone( I saw in the threads a couple of people live in philadelphia area). Number 1 thing I can't stand are scalpers, because they ruin for people like in this forum who just want to enjoy our cool little dvd console.
I just thought I would throw my name in last second. Even if i don't get picked i just wanted to say hello to the community! happy I found this
Sorry man but the poll is already been posted and it is not letting me add another choice. But welcome to the forum!
 

adsap27

New Member
no problem! Im glad i found community. I found this forum from atariage yesterday. is it best to communicate through here or over on that forum?
 

The Helper

Necromancy Power over 9000
Staff member
no problem! Im glad i found community. I found this forum from atariage yesterday. is it best to communicate through here or over on that forum?
Hopefully if it is about NUON stuff you would do that here as AtariAge does not have a NUON forum rather just one thread in an obscure area about it.
 

sixersfan105

NUON Lover!
I would like it so I can have it for testing to try and make controller access for nuon easier to get.

I have a friend that makes this controller adapter that lives close to me called the Bliss-Box https://bliss-box.net/
I helped him with a problem he had at first and made an "unofficial" firmware hack for it, it's not needed anymore now as he has bought the extra usb id's he needed.

this was the site I ran with my "unofficial" fix https://atarigalore.wixsite.com/4play

he is working on a new product that allows one end to plug to consoles (so far snes, genesis, psx, ps2, and a few more, 3do coming soon) and the other you use any and all controllers his adapter supports. I'm going to bring my nuon over to him with controllers for him to analyze and add support.....

if all goes well I'm gonna see about maybe paying him to have the dongles needed for his adapter to plug to the nuon controller ports mass produced, otherwise it would have to be a home made dongle made by anyone wanting it...... he only usually has dongles that a lot of people request made as it's not the cheapest thing to do in quantities where cost per piece would be worth it.
So if it works out I will just get a small amount per dongle he would sell, I probably wouldn't get all my money back but it will be one of the only ways to make the nuon more accessable to more people.

I am a tester for him and have one of the original beta units.

this could open up much cheaper analog controllers for nuon by using ps2, or n64 controllers for instance.
very cool! Do you have a source for the proprietary polyface chip that all Nuon controllers (or adapters) need to communicate with the Nuon player? It was my understanding that only one guy has the VM Labs backstock of those chips :(
 

V-SNES

NUON Lover!
very cool! Do you have a source for the proprietary polyface chip that all Nuon controllers (or adapters) need to communicate with the Nuon player? It was my understanding that only one guy has the VM Labs backstock of those chips :(
That's my understanding. Currently Nick Persijn is working with him to produce the rev2 Yak Twister boards though there hasn't been an update since December. Hopefully we hear from Lee soon. In the grand scheme of things though, I think FPGA would be the best option long-term (not that I'm capable of doing that). Something was done similarly in the Wonderswan community to get around the special Bandai 200x chip.
 
Last edited:

atarigalore

New Member
very cool! Do you have a source for the proprietary polyface chip that all Nuon controllers (or adapters) need to communicate with the Nuon player? It was my understanding that only one guy has the VM Labs backstock of those chips :(
snooping the data being transmitted to catch the data being sent and received to and from nuon and controller, then you can mimic the same data to authenticate or whatever with the system.... that's how my buddy's adapter works.. it's not that complicated, or at least not for him...

I have seen and helped him many times with other systems.

once he snoops the data lines to and from.... his adapter would show up as and send the same data and responses back to the nuon, so it would look like a regular nuon pad.

he hasn't found a system yet that we couldn't get working. i think we have a connector that fits the ports on the nuon now too.

how do you think all these adapters for other systems work anyway..... for instance, the n64 or gamecube (same protocol different controller id's)
there is only 3 pins.... only way is to fake it so to speak, it's not like there are nintendo branded chips in all these knock off controllers....

most systems that are newish use some kind of data not just touching pins together
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • tom_mai78101 tom_mai78101:
    I dunno if I ever mentioned it here, but my bot actually helped someone discover a new way to clip through walls.
  • tom_mai78101 tom_mai78101:
    However, not many folks heard about it, because it's currently only compatible with the latest dev builds of multi-system emulator, BizHawk.
  • jonas jonas:
    cool! do you have a video?
  • tom_mai78101 tom_mai78101:
    I have a GIF though
  • tom_mai78101 tom_mai78101:
    In the GIF, I've configured it so the lower the "Main Value" is, the better. I had to compress it pretty far down though.
  • tom_mai78101 tom_mai78101:
    And this is the thread with the video that shows the wall clip. https://tasvideos.org/Forum/Topics/23453
    +2
  • tom_mai78101 tom_mai78101:
    Hmm, about the Headline News, I noticed threads are being moved into the subforum (Health News, Environmental News, etc.). When that happens, the TH Forum Home page loses the articles, and instead would show old articles posted 1 or 2 weeks ago.
  • tom_mai78101 tom_mai78101:
    What do we do with the Home page?
  • Ghan Ghan:
    I added those forums to the filter for that widget.
  • tom_mai78101 tom_mai78101:
    Oh nice. They're back. Thanks.
  • tom_mai78101 tom_mai78101:
    Now I think it makes more sense for me to put news in their own subforums, without worry.
  • The Helper The Helper:
    Awesome Ghan thanks! I was purposely not moving the first 15 news articles in Headline news to the different subforums but I guess I don't have to do that now?
  • tom_mai78101 tom_mai78101:
    Question: Is there a way to remove thread redirects? It creates a copy of the moved thread and takes up space, and I am leaning towards wanting to remove them in the Headline News. But if they have an expiration date, I guess I'm fine with it.
  • The Helper The Helper:
    If you move a thread please leave a permanent redirect. You can delete any redirects after 6 months. The redirects are left to help Search Engines find the moved content.
  • tom_mai78101 tom_mai78101:
    What if you move the permanent redirect, not the thread?
  • The Helper The Helper:
    I think that works but I have not messed with it. You can delete redirects though if you have to that will not delete the original thread
  • The Helper The Helper:
    if a redirect ends up in the same forum as the post it goes to though I think the redirect drops or fails or something but they are not bugged out and when you are working on an indirect the original post is safe.
  • The Helper The Helper:
    Happy Early Friday :)
    +1
  • V-SNES V-SNES:
    Happy Friday :)
  • tom_mai78101 tom_mai78101:
    Fun Friday for me
  • tom_mai78101 tom_mai78101:
    Happy Fun Friday to all.
    +2
  • The Helper The Helper:
    Happy Sunday everyone!!!
  • V-SNES V-SNES:
    Happy Sunday!!!
    +1
  • jonas jonas:
    Happy monday :p

    Members online

    Affiliates

    Hive Workshop NUON Dome World Editor Tutorials

    Network Sponsors

    Apex Steel Pipe - Buys and sells Steel Pipe.
    Top