Overclocking your NVidia Graphics Card

H

hobo218

Meh
Reaction score
75
My old tutorial on this got deleted in the crash, so I thought I'd make a new one.

Here's an easy way to overclock your NVidia graphics card without having to download any extra programs. All you have to do is add a registry entry and then the settings appear in your driver config.

Before I start:
-I'm basing my tutorial off ForceWare driver Version 91.31
-I'm using Windows XP Professional
-Overclocking your graphics card voids your warrenty and NVidia is not liable for any damages.
-Make sure you have ample cooling devices, as overclocking increases your system's heat output
-Make a backup of your regestry just in case
-I recommend only using this on newer NVidia cards

Ok. Now that I have that out of the way.

Step 1: Make sure you have the latest graphics card driver.
Step 2: Open your registry editor. Start>Run>regedit
Step 3: Open the following directory in the registry.

HKEY_LOCAL_MACHINE\SOFTWARE\NVIDIA Corporation\Global\NVTweak

Coolbits.jpg


Step 4: Once you have the directory open, Right-Click anywhere in the white area. Go New>DWORD Value

Coolbits2.jpg


Step 5: Name the value Coolbits with a Hexadecimal value of 3 and press "Ok"

Coolbits3.jpg


Step 6: Close the Registry Editor and open up your NVidia control panel.

Coolbits4.jpg


Step 7: Go into the 3D Settings category in the NVidia Control Panel.
Step 8: Under the Performance category, there should now be a link to Change Overclocking Configuration. If it's not there, go back and double check to make sure you followed all the steps correctly.

Note-- I HIGHLY recommend either using the "Auto Overclocking" setting or using the "Find Optimal" configuration, as this will find the best clock speeds for your card. I personally used the "Find Optimal" and then lowered the settings a little. I also recommend running your fan at the highest speed.

Coolbits5.jpg


Step 9: After you either do the "Auto Overclock" or the "Find Optimal" and you're happy with the new clock speed, and would like the speed to stay that way, uncheck "Use these settings only until I restart my computer."
Step 10: You can also click the "Test" button to test your new settings. I also recommend using your Tempurature Monitor to compare how much your tempurature increased.

When you're done, go ahed and close the Control Panel.

Final Notes:
-You can always go back to your original settings using the Restore Defaults button or by selecting the Factory Clock Settings.
-I, TheHelper.net, nor NVidia is liable if anything goes wrong due to overclocking.

-hobo218
 
H

hobo218

Meh
Reaction score
75
Bump.
I would appriciate some feedback as to how well I covered this. Even if you're not going to use it.

Thanks. :)
 
X

x-anubis-x

TH.net Regular
Reaction score
4
wow, that is a really in-depth guide (as far as i can tell). i don't have a nvidia card so if thats the way to overclock your card without using a third party program then props to you lol.
 
H

hobo218

Meh
Reaction score
75
To Anubis- Yes, this does not requre any 3rd Party Programs.

To kc- This tutorial should work for all NVidia chips, despite the manufacturer.

Thanks for the feedback. :)
 
Prometheus

Prometheus

Everything is mutable; nothing is sacred
Reaction score
589
I don't have a NVidia Vid Card, I think mine its made by VisionTek
 
H

hobo218

Meh
Reaction score
75
That is a manufacturer.
As long as it's an NVidia chipset this should work.

If you want, post your graphics card model and I can tell you if this applies to it.
 
King TonGoll

King TonGoll

ORLY?*DDR*
Reaction score
87
KC if you dont even know that much about your chip i highly suggest you dont tamper with it. overclocking can have bad effects if you have your card running too long.

allso good job hobo.
 
NoxMortus

NoxMortus

All Along the Watchtower
Reaction score
104
I thought overclocking included physically modifying your card :rolleyes:

This should come in handy for my 6600 when I get an extra fan.

P.S I have to spread around before givin you rep.
 
U

Unregistered

Guest
this was very helpfull for my card but for some reason it want let me set it by my standed. it only lets me use the automatic feature I use the 7300 le pciexpress which i hae head isn't all that good but it came with the pc so i'm stuck with it for a while.
 
You must log in or register to reply here.
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Varine Varine:
    I ordered like five blocks for 15 dollars. They're just little aluminum blocks with holes drilled into them
  • Varine Varine:
    They are pretty much disposable. I have shitty nozzles though, and I don't think these were designed for how hot I've run them
  • Varine Varine:
    I tried to extract it but the thing is pretty stuck. Idk what else I can use this for
  • Varine Varine:
    I'll throw it into my scrap stuff box, I'm sure can be used for something
  • Varine Varine:
    I have spare parts for like, everything BUT that block lol. Oh well, I'll print this shit next week I guess. Hopefully it fits
  • The Helper The Helper:
    Check out this Snickers Cheesecake :) https://www.thehelper.net/threads/recipe-snickers-cheesecake.193488/
  • The Helper The Helper:
    Check out this Sloppy Joe Biscuit Casserole! https://www.thehelper.net/threads/recipe-sloppy-joe-biscuit-casserole.193492/
  • Varine Varine:
    I see that, despite your insistence to the contrary, we are becoming a recipe website
  • Varine Varine:
    Which is unique I guess.
  • The Helper The Helper:
    Actually I was just playing with having some kind of mention of the food forum and recipes on the main page to test and see if it would engage some of those people to post something. It is just weird to get so much traffic and no engagement
  • The Helper The Helper:
    So what it really is me trying to implement some kind of better site navigation not change the whole theme of the site
  • Varine Varine:
    How can you tell the difference between real traffic and indexing or AI generation bots?
  • The Helper The Helper:
    The bots will show up as users online in the forum software but they do not show up in my stats tracking. I am sure there are bots in the stats but the way alot of the bots treat the site do not show up on the stats
  • The Helper The Helper:
    New recipe is Shipwreck Dinner - https://www.thehelper.net/threads/recipe-shipwreck-dinner.193511/
  • Varine Varine:
    I want to build a filtration system for my 3d printer, and that shit is so much more complicated than I thought it would be
  • Varine Varine:
    Apparently ABS emits styrene particulates which can be like .2 micrometers, which idk if the VOC detectors I have can even catch that
  • Varine Varine:
    Anyway I need to get some of those sensors and two air pressure sensors installed before an after the filters, which I need to figure out how to calculate the necessary pressure for and I have yet to find anything that tells me how to actually do that, just the cfm ratings
  • Varine Varine:
    And then I have to set up an arduino board to read those sensors, which I also don't know very much about but I have a whole bunch of crash course things for that
  • Varine Varine:
    These sensors are also a lot more than I thought they would be. Like 5 to 10 each, idk why but I assumed they would be like 2 dollars
  • Varine Varine:
    Another issue I'm learning is that a lot of the air quality sensors don't work at very high ambient temperatures. I'm planning on heating this enclosure to like 60C or so, and that's the upper limit of their functionality
  • Varine Varine:
    Although I don't know if I need to actually actively heat it or just let the plate and hotend bring the ambient temp to whatever it will, but even then I need to figure out an exfiltration for hot air. I think I kind of know what to do but it's still fucking confusing
  • The Helper The Helper:
    Maybe you could find some of that information from AC tech - like how they detect freon and such
  • Varine Varine:
    That's mostly what I've been looking at
  • Varine Varine:
    I don't think I'm dealing with quite the same pressures though, at the very least its a significantly smaller system. For the time being I'm just going to put together a quick scrubby box though and hope it works good enough to not make my house toxic
  • Varine Varine:
    I mean I don't use this enough to pose any significant danger I don't think, but I would still rather not be throwing styrene all over the air

      The Helper Discord

      Members online

      No members online now.
      Online now:
      443 (members: 0, guests: 443)

      Share this page

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top