poster printing

Genkora

Genkora

Frog blast the vent core!
Reaction score
92
I wanted to go print a poster at fedex office, but I'm not 100% sure on how it will come out as I have never done it before. The image I want to print is in 300 dpi and the dimensions are 4000 x 5177 pixels. If I kept the print at 300 dpi, it would only be something like 1' x 1.5'. Obviously I don't want the poster to be this small. How low can I take the dpi without the resolution on the actual poster looking bad? I know most images on the internet have a dpi of 72 (or something like that), but I don't want to go that low. I figure blowing it up to twice the size, or decreasing the dpi to 150 should still look good and give me a pretty good sized poster. Anyone have any experience with this?
 
Pineapple

Pineapple

Just Smile.
Reaction score
576
That depends, how close are peopel going to be seeing it?

I wouldn't advise droping below 200 as Whitesock said, I wouldn't advise going to 200 either.
 
Genkora

Genkora

Frog blast the vent core!
Reaction score
92
Well, I don't intend on people putting their faces in it. I already stopped by the place and they are making some proofs, which I will go back and check on in a few. Thanks for the help.
 
You must log in or register to reply here.
General chit-chat
Help Users
  • No one is chatting at the moment.
  • The Helper The Helper:
    So what it really is me trying to implement some kind of better site navigation not change the whole theme of the site
  • Varine Varine:
    How can you tell the difference between real traffic and indexing or AI generation bots?
  • The Helper The Helper:
    The bots will show up as users online in the forum software but they do not show up in my stats tracking. I am sure there are bots in the stats but the way alot of the bots treat the site do not show up on the stats
  • The Helper The Helper:
    New recipe is Shipwreck Dinner - https://www.thehelper.net/threads/recipe-shipwreck-dinner.193511/
  • Varine Varine:
    I want to build a filtration system for my 3d printer, and that shit is so much more complicated than I thought it would be
  • Varine Varine:
    Apparently ABS emits styrene particulates which can be like .2 micrometers, which idk if the VOC detectors I have can even catch that
  • Varine Varine:
    Anyway I need to get some of those sensors and two air pressure sensors installed before an after the filters, which I need to figure out how to calculate the necessary pressure for and I have yet to find anything that tells me how to actually do that, just the cfm ratings
  • Varine Varine:
    And then I have to set up an arduino board to read those sensors, which I also don't know very much about but I have a whole bunch of crash course things for that
  • Varine Varine:
    These sensors are also a lot more than I thought they would be. Like 5 to 10 each, idk why but I assumed they would be like 2 dollars
  • Varine Varine:
    Another issue I'm learning is that a lot of the air quality sensors don't work at very high ambient temperatures. I'm planning on heating this enclosure to like 60C or so, and that's the upper limit of their functionality
  • Varine Varine:
    Although I don't know if I need to actually actively heat it or just let the plate and hotend bring the ambient temp to whatever it will, but even then I need to figure out an exfiltration for hot air. I think I kind of know what to do but it's still fucking confusing
  • The Helper The Helper:
    Maybe you could find some of that information from AC tech - like how they detect freon and such
  • Varine Varine:
    That's mostly what I've been looking at
  • Varine Varine:
    I don't think I'm dealing with quite the same pressures though, at the very least its a significantly smaller system. For the time being I'm just going to put together a quick scrubby box though and hope it works good enough to not make my house toxic
  • Varine Varine:
    I mean I don't use this enough to pose any significant danger I don't think, but I would still rather not be throwing styrene all over the air
  • The Helper The Helper:
    New dessert added to recipes Southern Pecan Praline Cake https://www.thehelper.net/threads/recipe-southern-pecan-praline-cake.193555/
  • The Helper The Helper:
    Another bot invasion 493 members online most of them bots that do not show up on stats
  • Varine Varine:
    I'm looking at a solid 378 guests, but 3 members. Of which two are me and VSNES. The third is unlisted, which makes me think its a ghost.
     +1
  • The Helper The Helper:
    Some members choose invisibility mode
     +1
  • The Helper The Helper:
    Latest Recipe is Garlic Parmesan Chicken https://www.thehelper.net/threads/recipe-garlic-parmesan-chicken.193575/
  • The Helper The Helper:
    I bitch about Xenforo sometimes but it really is full featured you just have to really know what you are doing to get the most out of it.
  • The Helper The Helper:
    It is just not easy to fix styles and customize but it definitely can be done
  • The Helper The Helper:
    I do know this - xenforo dropped the ball by not keeping the vbulletin reputation comments as a feature. The loss of the Reputation comments data when we switched to Xenforo really was the death knell for the site when it came to all the users that left. I know I missed it so much and I got way less interested in the site when that feature was gone and I run the site.
  • Blackveiled Blackveiled:
    People love rep, lol
     +1
  • The Helper The Helper:
    The recipe today is Sloppy Joe Casserole - one of my faves LOL https://www.thehelper.net/threads/sloppy-joe-casserole-with-manwich.193585/

      The Helper Discord

      Members online

      No members online now.
      Online now:
      433 (members: 0, guests: 433)

      Share this page

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top