QIII FPS Camera help

[MasterOfABCs]

OK, is thier a way to make a First Person Camera, not CLOSE to a FPS camera A FPS camera, and if thier is can you give me some tips on how to acomplish this?

 

[Im_On_56k]

No, if you were to make a first person, the model of the unit would go invisible in some parts.

 

[Myzteryz]

lol.. you wouldn't see the WHOLE model since ur in first point of view..

well tips

just make a camera and set it up right to make it look first point of view and lock it to a unit.. not that hard.
Im sure you know the triggers for that

 

[Husky]

At the wc3campigns site (which is down at the moment), there is a thing you can download which turns Warcraft III, into a First Person Shooter.

If your patient enough, you could wait for the site to come back up and download it.
NOTE: Have not tried it myself, but i've seen it there.

-Husky

 

[NoxMortus]

An idea here, if your models are going to be like the rifleman, you could try to set the range from the unit to about -10 or -50 (not 0 because you might see the inside of the models face or somethng) so then you could see your gun on the bottom right cornor of your screen which would be just like an fps, but it might run pretty slow on some peoples' computers.

 

[MasterOfABCs]

Thanks tons every one, i'll probly do that husky