TheHelper Pixel Picture Project

azareus said:
Why make a gradient? It would make more sense to just have the transition be an abrupt one IMO. Possibly just don't make a hole at all?
Click to expand...
Dunno, just thought it looked sorta blank and abrupt the other way. If you think it looks bad you can change it back; I didn't really have my heart in that square I just though everybody would just avoid it. :p
 
im wondering how that water doesn't flow over the edge considering right beside it the water is way above that level. Then again nothing in the pic makes sense so... lol

also the transitioning seems a bit off... but i didnt do that square so i can't really complain.
 
well, if there are no other openings, then it would work because the air pressure would keep the water out.
 
It's time to kick ass and chew bubble gum... and I'm all outta gum
attachment.php


Thats num 9 from me. i really need to get a hobby
 

Attachments

  • Jedimindtrixxx.png
    Jedimindtrixxx.png
    106 KB · Views: 591
Haha, two scenes going on in just two separate stories of the building.

~Hai-Bye-Vine~
 
Building? More like awesome flying fortress ;)

Cheers;
//Rhymer
 
It's not symmetrical, yours is lower than the right one D:
also, if its a flying contraption, then whats that long stick for! oh if only we left it as a stickman :(
my cs5 trial ran out so until i find a cs4 trial DL i wont be able to do nething (you cant spell paint without pain)
 
Smith_S9 said:
Firecat, your's is not really pixel art. You used a brush that was not with pixel-hard edges, right?
Click to expand...
No I didn't.. I Just warp it a bit. Was that wrong? lol If so, someone can remove my art LOL
 
Jedimindtrixxx said:
im wondering how that water doesn't flow over the edge considering right beside it the water is way above that level. Then again nothing in the pic makes sense so... lol

also the transitioning seems a bit off... but i didnt do that square so i can't really complain.
Click to expand...
The water isn't flooding into the compartment to the left of it, so I just left the water line parallel to that. I'll probably fix that square up sometime though.

EDIT: Changed my old panel (removed the gradient as of general vote, added a worm because it seemed empty) and made a new one.
attachment.php
 

Attachments

  • TEMP.png
    TEMP.png
    101.3 KB · Views: 587
Starship! :eek:

1z5jfdf.png


I got great idea!!! After we finish this picture we can continue by extending it !! Make another 10x10 and take one column or row from this picture and continue.. what da ya say!?

EDIT1: EEEeeeh.. I re-read rules now and now I realized I broke one rule two times already.. I made one block next to my old block.. Do I have to remove it? I won't do it again..
 
Furby said:
I got great idea!!! After we finish this picture we can continue by extending it !! Make another 10x10 and take one column or row from this picture and continue.. what da ya say!?

EDIT1: EEEeeeh.. I re-read rules now and now I realized I broke one rule two times already.. I made one block next to my old block.. Do I have to remove it? I won't do it again..
Click to expand...
I wouldn't bother delete it, no. I bet a bunch of people broke some rule or another. :p

As for extending it, you could. But it starts to get messy. I would rather a clean start, and maybe give the next one a general idea to make the picture around or something. That way it will be a little bit more organized (not a lot, that would ruin the whole point :rolleyes:) and make a bigger one out of that.

Oh yeah, I've been meaning to ask: Is that really chuck-norris's beard holding the boxing glove, or was that a joke?
 
You must log in or register to reply here.
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Varine Varine:
    I would be there for days, even with my camera set up slides can take a long time, and if they want perfect captures I really need to use my scanners that are professionally made for that. My camera rig works well for what it is, but for enlargements and things it's not as good.
  • Varine Varine:
    I've only had a couple clients with that so far, though. I don't have a website or anything yet though.
  • Varine Varine:
    Console repair can be worthwhile, but it's also not a thing I can do at scale in my house. I just don't have room for the equipment. I need an office that I can segregate out for archival and then electronic restoration.
  • Varine Varine:
    But in order for that to be real, I need more time, and for more time I need to work less, and to work less I need a different job, and for a different job I need more money to fall back on so that I can make enough to just pay like, rent and utilities and use my savings to find these projects
     +1
  • Varine Varine:
    Another couple years. I just need to take it slow and it'll get there.
  • jonas jonas:
    any chance to get that stolen money back?
  • jonas jonas:
    Maybe you can do console repair just as a side thing, especially if there's so much competition business might be slow. Or do you need a lot of special equipment for that?
  • jonas jonas:
    I recently bought a used sauna and the preowner told me some component is broken, I took a look and it was just a burnt fuse, really cheap to fix. I was real proud of my self since I usually have two left hands for this kinda stuff :p
  • tom_mai78101 tom_mai78101:
    I am still playing Shapez 2. What an awful thing to happen, Varine, and hopefully everything has been sorted out soon. Always use multi-factor authentication whenever you have the opportunity to do so.
     +1
  • Varine Varine:
    I think all of the money is accounted for now, and all the cards have been changed out, so I think for the most part it's taken care of now. Just need to go through and make sure all of my accounts are secured again, it's just time consuming.
  • Varine Varine:
    And yeah everything has 2 factor turned on now, or at least everything I can think of at the moment.
  • Varine Varine:
    The consoles don't need too much equipment that I don't already have. I would like to get a reflow oven, but I don't really want to buy one so I'm thinking about modifying a toaster oven I have to make something that will work for what I'm doing.
  • Varine Varine:
    I have the soldering irons and reflow and all that, but without an oven it's kind of hard to build mod chips and things like that. I made a handful of them with a hot air station, but it's a pain.
  • Varine Varine:
    The only thing I'm not really set up for is BGA rework. I've done it before a little bit, but not reliably, and that equipment is wildly expensive. You need X-rays and shit.
  • Varine Varine:
    I also have a couple 3D printers. I'm not super good with those and need to get an enclosure built, but they'll be useful for some aesthetic mods I've been thinking about. At least I can use them to do designs and then just have someone else print out the parts for me once I know they work.
  • Varine Varine:
    I also use them to make adapters for all my camera shit, but that's also an on the side thing for now. Lens adapters get really expensive.
  • Varine Varine:
    I've been trying to do some little art pieces as well, but I'm not much an engineer so they haven't gone great. I got some new things showing up to try and play with
  • Varine Varine:
    I want to build this tesserect kind of thing with mirrors, and I've been trying to make this like black hole diorama. In my head it looks really cool, but I kind of thought I could form polarizing lenses into a sphere but I tend to just destroy them every time I try.
  • Varine Varine:
    So I got a new idea, but I'm not sure how to make it work like I want without being able to get a polarizer curved. I think they are made out of PVA typically, and I thought I could just heat it up a little bit to soften the film, but that clearly isn't working. So I'm going to try a few other things, I'm thinking if I put a mirror film over the polarizing film I might get something cool. I have some polarized LED's as well, and I think if I make a central light source I can use the mirrors combined with the polarizers to make that central light APPEAR black. I have next week off so I'm going to spend some time trying to figure it out
  • Varine Varine:
    The tesserect works, at least. I just need to figure out how to be able to assemble it, but I think I have a pretty good idea of how to go about it. Or at least a prototype of it. I'll post some pictures next week
  • jonas jonas:
    That last bit sounds like the last entry in a scientist's journal in a destroyed research facility in a post-apocalyptic video game
  • Varine Varine:
    lol it's not that exciting
  • Varine Varine:
    Shiny tho
  • Varine Varine:
    Basically it's a cube with a two way mirror on the inside, and then a smaller cube suspended in that with a mirrors on the outside of it. Kind of like those infinity pictures where they use two mirrors to go forever. Only it's twelve mirrors
  • Varine Varine:
    And the tiniest LED strip I could find

      The Helper Discord

      Staff online

      Members online

      Online now:
      231 (members: 1, guests: 230)

      Share this page

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top