XP BSOD when BF1942 Loads

D

DoH BoY

Guest
Not sure if this is right place, apologies if it isn't

Got a strange problem

Just got some new bits together

Gigabyte K7 Triton 400 (GA-7VA)
Athlon 2400+
512MB DDR 333
Gainward GeForce 5600 128MB
Seagate 40GB
XP Pro

I can play Battlefield offline fine, the game loads and I can jolly about happlessly killin bots

I connect to the ASE load a server and it gets as far as the connecting to server part where the bar loads about 1cm then it goes to the Blue Screen with the general message :

Problem has been detected windows has been shut down.

DRIVER_IRQL_NOT_LESS_OR_EQUAL

Tech Info

(Here it has loads of numbers)

ALCXSENS>SYS

Beginning dump of Physical Memory

Then I have to turn the PC off and restart it.

I downloaded the latest drivers which were 4403 for the GFX Card then un-installed it all and went back to the CD drivers thinking the problem may lie there, but I thought how come it plays offline ok

So I thought it could be my Modem it's a Supra Express 56i Pro as this had a problem on my old pc where it would disconnect from a BF Server after about 15 mins

So I replaced this Modem with a Rockwell and still the problem occurs and I'm gutted because I've finally got a PC again that can play BF

TIA
 
U

Unregistered

Guest
if it is your memory try shutting down some of the programs you dont use that may run in the backround also you can adjust the amount of space your harddrive uses for virtual memory because bf uses a lot of memory and 512 may not cut it. that is what i had 512 and i had to upgrade to 1 gig and now all is fine
 
U

Unregistered

Guest
have you downloaded all of the patches for battlefield? i had problems when i bought it but updated to all of the newest versions of the patches and it works good now. 512 megs of ram should be good enough to run the game on any system. and im sure it is.. wont get the best loading times or anything but it should run just fine.
 
S

Switch

Guest
Yeah i have the exact same problem and i have tried those MS RAM Diagnostics tools and it came up with no errors. I got my PC recently and havent had anything but problems, like not being able to install games but being able to install windows and drivers.

My specs are:

Gigabyte K7 Triton
Athlon XP 2800+
512 DDR 400
Geforce 4 Ti 128mb 4200
WinXP Pro

Our specs are very similar, maybe its our hardware :(
 
You must log in or register to reply here.
General chit-chat
Help Users
  • No one is chatting at the moment.
  • The Helper The Helper:
    The bots will show up as users online in the forum software but they do not show up in my stats tracking. I am sure there are bots in the stats but the way alot of the bots treat the site do not show up on the stats
  • The Helper The Helper:
    New recipe is Shipwreck Dinner - https://www.thehelper.net/threads/recipe-shipwreck-dinner.193511/
  • Varine Varine:
    I want to build a filtration system for my 3d printer, and that shit is so much more complicated than I thought it would be
  • Varine Varine:
    Apparently ABS emits styrene particulates which can be like .2 micrometers, which idk if the VOC detectors I have can even catch that
  • Varine Varine:
    Anyway I need to get some of those sensors and two air pressure sensors installed before an after the filters, which I need to figure out how to calculate the necessary pressure for and I have yet to find anything that tells me how to actually do that, just the cfm ratings
  • Varine Varine:
    And then I have to set up an arduino board to read those sensors, which I also don't know very much about but I have a whole bunch of crash course things for that
  • Varine Varine:
    These sensors are also a lot more than I thought they would be. Like 5 to 10 each, idk why but I assumed they would be like 2 dollars
  • Varine Varine:
    Another issue I'm learning is that a lot of the air quality sensors don't work at very high ambient temperatures. I'm planning on heating this enclosure to like 60C or so, and that's the upper limit of their functionality
  • Varine Varine:
    Although I don't know if I need to actually actively heat it or just let the plate and hotend bring the ambient temp to whatever it will, but even then I need to figure out an exfiltration for hot air. I think I kind of know what to do but it's still fucking confusing
  • The Helper The Helper:
    Maybe you could find some of that information from AC tech - like how they detect freon and such
  • Varine Varine:
    That's mostly what I've been looking at
  • Varine Varine:
    I don't think I'm dealing with quite the same pressures though, at the very least its a significantly smaller system. For the time being I'm just going to put together a quick scrubby box though and hope it works good enough to not make my house toxic
  • Varine Varine:
    I mean I don't use this enough to pose any significant danger I don't think, but I would still rather not be throwing styrene all over the air
  • The Helper The Helper:
    New dessert added to recipes Southern Pecan Praline Cake https://www.thehelper.net/threads/recipe-southern-pecan-praline-cake.193555/
  • The Helper The Helper:
    Another bot invasion 493 members online most of them bots that do not show up on stats
  • Varine Varine:
    I'm looking at a solid 378 guests, but 3 members. Of which two are me and VSNES. The third is unlisted, which makes me think its a ghost.
     +1
  • The Helper The Helper:
    Some members choose invisibility mode
     +1
  • The Helper The Helper:
    Latest Recipe is Garlic Parmesan Chicken https://www.thehelper.net/threads/recipe-garlic-parmesan-chicken.193575/
  • The Helper The Helper:
    I bitch about Xenforo sometimes but it really is full featured you just have to really know what you are doing to get the most out of it.
  • The Helper The Helper:
    It is just not easy to fix styles and customize but it definitely can be done
  • The Helper The Helper:
    I do know this - xenforo dropped the ball by not keeping the vbulletin reputation comments as a feature. The loss of the Reputation comments data when we switched to Xenforo really was the death knell for the site when it came to all the users that left. I know I missed it so much and I got way less interested in the site when that feature was gone and I run the site.
  • Blackveiled Blackveiled:
    People love rep, lol
     +1
  • The Helper The Helper:
    The recipe today is Sloppy Joe Casserole - one of my faves LOL https://www.thehelper.net/threads/sloppy-joe-casserole-with-manwich.193585/
  • The Helper The Helper:
    Decided to put up a healthier type recipe to mix it up - Honey Garlic Shrimp Stir-Fry https://www.thehelper.net/threads/recipe-honey-garlic-shrimp-stir-fry.193595/
  • The Helper The Helper:
    Here is another comfort food favorite - Million Dollar Casserole - https://www.thehelper.net/threads/recipe-million-dollar-casserole.193614/

      The Helper Discord

      Members online

      No members online now.
      Online now:
      448 (members: 0, guests: 448)

      Share this page

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top