Buff comparison and the related problem.

xAnaMorphine

Active Member
Reaction score
43
Hello everyone,

I have a problem concerning a simple buff comparison and unit group function.
The debug message shows that there are 0 units in the unit group.
Any solution?
My trigger look like these:

Trigger:
  • Ice Cold
    • Events
      • Unit - A unit Starts the effect of an ability
    • Conditions
      • (Ability being cast) Equal to Ice Cold (Archmage - Skill)
    • Actions
      • Set IceColdLoc = (Target point of ability being cast)
      • Set IceColdDegree = 0.00
      • For each (Integer A) from 1 to 60, do (Actions)
        • Loop - Actions
          • Destructible - Create a Ice Cold (Pathing Blocker) at (IceColdLoc offset by 400.00 towards IceColdDegree degrees) facing (Random angle) with scale 1.00 and variation 0
          • Set IceColdDegree = (IceColdDegree + (360.00 / (Real((Integer A)))))
      • Game - Display to (All players) the text: (Number of Units in IceColdTarget: + (String((Number of units in IceColdTarget))))
      • Unit Group - Pick every unit in (Units within 800.00 of IceColdLoc) and do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • ((Picked unit) has buff Ice Cold ) Equal to True
            • Then - Actions
              • Unit Group - Add (Picked unit) to IceColdTarget
            • Else - Actions
      • Game - Display to (All players) the text: (Number of Units in IceColdTarget: + (String((Number of units in IceColdTarget))))
      • Countdown Timer - Start IceColdTimer as a One-shot timer that will expire in 3.00 seconds
 

Juggernaut

I don't know what to change it to
Reaction score
33
what is IceColdTarget ? you haven't declared it in the trigger.

maybe you need to set IceColdTarget = units within 800 range
and then swap that with IceColdTarget
 

Juggernaut

I don't know what to change it to
Reaction score
33
yes, but you haven't declared it in this trigger. or is it declared somewhere else ?
 

xAnaMorphine

Active Member
Reaction score
43
Afaik it doesn't matter.
I used something similiar to your solution:

Trigger:
  • Set IceColdTarget = (Units within 800.00 of IceColdLoc matching (((Matching unit) has buff Ice Cold ) Equal to True))


However, it doesn't work either.
 

KaerfNomekop

Swim, fishies. Swim through the veil of steel.
Reaction score
613
Maybe the buff isn't applied when the unit starts the effect of the ability? You might need damage detection for this, as Finishes casting an ability won't give you the targeted location.
 

xAnaMorphine

Active Member
Reaction score
43
The units do have the buff for the full duration of the trigger and the location is the right one.
 

KaerfNomekop

Swim, fishies. Swim through the veil of steel.
Reaction score
613
I mean when the effect fires. Starts the effect of an ability most likely fires before the buff(s) get placed on the unit(s). I'm sure damage detection works, because I use it in my own system.
 

vypur85

Hibernate
Reaction score
803
Not too hard to test this. Remove the buff condition within the unit group. Then check if there is an increase of unit in IceColdTarget. If it does have a number then, it's confirmed that the buff was indeed the problem.
 

xAnaMorphine

Active Member
Reaction score
43
I got it working now.
I moved the buff comparison into another trigger and changed a few things.
If someone wants to take a look at the trigger here it is:

Trigger:
  • Ice Cold
    • Events
      • Unit - A unit Starts the effect of an ability
    • Conditions
      • (Ability being cast) Equal to Ice Cold (Archmage - Skill)
    • Actions
      • Set IceColdCaster = (Casting unit)
      • Set IceColdLoc = (Target point of ability being cast)
      • Set IceColdDegree = 0.00
      • For each (Integer A) from 1 to 60, do (Actions)
        • Loop - Actions
          • Destructible - Create a Ice Cold (Pathing Blocker) at (IceColdLoc offset by 400.00 towards IceColdDegree degrees) facing (Random angle) with scale 1.00 and variation 0
          • Set IceColdDegree = (IceColdDegree + (360.00 / (Real((Integer A)))))
      • Countdown Timer - Start IceColdTimer as a One-shot timer that will expire in 3.00 seconds


Trigger:
  • Ice Cold Effekt
    • Events
      • Time - IceColdTimer expires
    • Conditions
    • Actions
      • Unit Group - Pick every unit in (Units within 800.00 of IceColdLoc matching (((Matching unit) has buff Ice Cold ) Equal to True)) and do (Actions)
        • Loop - Actions
          • Unit Group - Add (Picked unit) to IceColdTarget
          • For each (Integer A) from 0 to (Number of units in IceColdTarget), do (Actions)
            • Loop - Actions
              • Unit - Create 1 Dummy for (Owner of IceColdCaster) at IceColdLoc facing Default building facing degrees
              • Unit - Add a 3.00 second Generic expiration timer to (Last created unit)
              • Unit - Add (Frost Nova - Dummy Unit) to (Last created unit)
              • Unit - Order (Last created unit) to Undead Lich - Frost Nova (Picked unit)
      • Destructible - Pick every destructible within 1000.00 of IceColdLoc and do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Destructible-type of (Picked destructible)) Equal to Ice Cold (Pathing Blocker)
            • Then - Actions
              • Destructible - Remove (Picked destructible)
            • Else - Actions
      • Unit Group - Remove all units from IceColdTarget
      • Custom script: call RemoveLocation(udg_IceColdLoc)
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +1
  • V-SNES V-SNES:
    Happy Friday!
    +1

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top