Building a gaming PC

Flare

Stops copies me!
Reaction score
662
I'm currently looking into building a gaming PC (and I'm not very good with these things, so please bear with me :p) - at present, exact budget isn't known, but I'm aiming for somewhere in the €1000 - €1200 region, but I'm at a loss as to what exactly I need

Currently, the parts I'm looking at right now are

So, what I need to know is:
  • Are any of these parts incompatible with each other, at a glance? Is there some way that I can check? One in particular that I'd like to know is if the screwholes on the case will align with any motherboard (you have to screw the motherboard onto the case, right?)
  • Are there any parts there which would be in need of an upgrade? I'm not looking for something mind-blowing, but I really don't want to spend money on something which may hold everything back for one reason or another
  • Are there any other vital parts that I need to add to my list? :p

Also, I must find out some information on cooling - will I need to buy cooling fans separately, or are they part-and-parcel of the GFX card, CPU and case?
 

Samael88

Evil always finds a way
Reaction score
181
The motherboard support both the ram, and the graphics card and the processor have the same socket. The UPS does also seem to be good.
Things to keep in mind though:
That graphics card seem to require two extra power cables connected to it and a minimum UPS of 500watts minimum is recommended.

So as far as that goes you seem to be good:) I can't help you on the rest though.

Edit: btw, that Graphics card makes me drewl:eek: DDR5 RAM on it ;)
 

Ghan

Administrator - Servers are fun
Staff member
Reaction score
889
I would not get that RAM. I don't know if it will work, though I suspect it would. The problem here is that it is not triple-channel. X58 and the i7 9xx series support triple channel memory. So what I would do (and what I did, actually) is get a 6GB kit (2GBx3) so that you have triple channel.
 

Tru_Power22

You can change this now in User CP.
Reaction score
144
Yeah, like Ghan said, the triple channel memory is a good idea. Not to mention it's not that much more expensive.
 

AnthraxXx

New Member
Reaction score
25
Everything looks good, but personally I would go Core i5 750 BUT seeing as how your budget allows for i7, you can't go wrong with the 920. As said above, get Triple Channel memory, there are benchmarks that show triple channel is better for core i7 systems which show significant improvements in gaming. Also get PC3-10600 rated RAM, it is faster than 8500 and doesn't cost much more. RAM brand isn't really important but stick to the well-known ones.

http://www.techreport.com/articles.x/15967 (Skip to the gaming page in the article)

Yes your motherboard will screw into the case, as long as it is ATX and your case supports ATX-sized motherboards.

Good choice of PSU, a single rail is much better than dual or quad rails.

Don't forget the OS if you haven't got one already.

Other than that, looks good.
 

Flare

Stops copies me!
Reaction score
662
Just looking around, but Dabs doesn't seem to give a whole pile of information with regard to that PC3-#### thing (e.g. this, which is the only 6GB memory kit available that is DDR3 and Non-ECC, as the compatibility checker here says that the motherboard is Non-ECC only). So, with that in mind, would the memory I linked be ideal (or, at least, worth the money), or would I be best off finding another retailer for the memory?

Don't forget the OS if you haven't got one already.
Ah, completely forgot about that, thanks for the reminder :)

EDIT: Ah, the Corsair site is quite informative - found that the memory I linked ic PC3-12800 :p
 

SD_Ryoko

Ultra Cool Member
Reaction score
85
I see a lot of people picking up quad cores with lower speeds for gaming systems.

Almost no games on the market utilize a quad core. -some- utilize duo core processors.

You could get a higher single, duo speed processer and have better gaming performance. IE, 3.x ghz duo cores rather than a 2.6 quad.

Just my 2 cents. Research the games your playing / intend to play to see if they will utilize it or not.
 

AnthraxXx

New Member
Reaction score
25
i5 and i7 obliterate the top end c2d's.... namely e8400, 8500...
The days of C2D are nearing its end.

ALL benchmarks of E8500 vs i5's are topped by 10-30 FPS, regardless if all four cores are utilised or not.
 

SerraAvenger

Cuz I can
Reaction score
234
i5 and i7 obliterate the top end c2d's.... namely e8400, 8500...
The days of C2D are nearing its end.

ALL benchmarks of E8500 vs i5's are topped by 10-30 FPS, regardless if all four cores are utilised or not.

Benchmarks are fake.
Nevertheless, I'm an avid Intel hater for one reason or another.
When AMD dies... I can't even think about it :p

I like to have three HDDs with RAID 5.

A faster RAM might be nice too (as AnthraxXx pointed out...)
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1
  • The Helper The Helper:
    New recipe is another summer dessert Berry and Peach Cheesecake - https://www.thehelper.net/threads/recipe-berry-and-peach-cheesecake.194169/

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top