Can Not Start Windows Normally

Squeekems

TH.net Regular
Reaction score
11
I tend to keep my computer on all of the time. It runs smoothly and usually never crashes.

It is when we have power outages that I run into issues. When starting, my computer makes it to the Windows logo, and then the screen goes blank as if it is getting no signal.

Usually I have the hold the power button to stop the computer and try to start it again.
Now the screen goes blank for a short time, and then shows a quick blue screen and restarts.

I do not know what information you need to help me resolve this issue I am having with starting.

I am actually posting from this computer in safe mode. Safe mode starts without any problems.
 

rover2341

Is riding a roller coaster...Wee!
Reaction score
113
I am no expert (likey less then most people here).

But If it was me. I would try a few things (assuming your conformable with it).

  1. Keep Unpluged And Un powered for 3 min (Re plug, and test)
  2. Remove Ram, Put Ram Back in. (replug, test)
  3. Assuming more then 1 ram unit, remove one, and keep the other. and visa versa.
  4. Unplug Video card and use on board card
I cant say any of that will help. Another Thought. Is you can go to safe mode, then my computer then device manger. and check to see if any of those have ! next to them or a yellow symbol. If so perhaps its a driver causing your computer to crash. Example: a bad video card driver, that attempts to load and isn't working right, could cause it not to load windows.

I would personally avoid touching the bios, or resting it unless you have tired everything else as i know that can jack things up in windows.

Hope that helps.


EDIT: The Fact that Safe mode comes up, Means its not using most of your drivers and using safe mode type drivers. (At least I think so). So That points in the Driver Issue department. But again Not sure.

Edit**: What Version of windows?
 

Slapshot136

Divide et impera
Reaction score
471
it sounds to me like something on the hard drive has been corrupted (from a hard power crash), likely some sort of driver - best solution would be a clean windows install
 

Varine

And as the moon rises, we shall prepare for war
Reaction score
808
Couldn't he just do a repair install?
 

Squeekems

TH.net Regular
Reaction score
11
I was suspecting it to be my video driver. I have Windows 7 Home Premium.

I am terrible with drivers. I am hoping to avoid a reformat or reinstall. What can I do to fix the driver?
 

-OverpoweR-

Member
Reaction score
13
I would blame your RAM for this, if you have two or more, try removing each at a time and see which one is faulty, as for drivers, search for 3DP Chip on google, it scans and finds all your required drivers at once,it is very easy to use and has a very simple interface
 

Slapshot136

Divide et impera
Reaction score
471
I would blame your RAM for this, if you have two or more, try removing each at a time and see which one is faulty

bad Ram would make the computer unable to stay on for long periods of time, such as the OP's normal habbit - also it's generally best to use a memory testing program (like memtest86) to see if there are bad sticks, as then there is less stuff going on and it's easier to pinpoint issues
 

Monovertex

Formerly Smith_S9
Reaction score
1,461
I think important Windows files are corrupted or your HDD is damaged. What are you describing could be caused by faulty RAM, but in my experience a fresh install of Windows almost always fixes the issue.
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1

      The Helper Discord

      Members online

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top