Environment Giant box close to being over oil-spewing well

The Helper

Necromancy Power over 9000
Staff member
Reaction score
1,701
AP) -- A mission to the bottom of the sea to try to avert a wider environmental disaster progressed early Friday as crews said a 100-ton concrete-and-steel box was close to being placed over a blown-out well on the Gulf floor in an unprecedented attempt to capture gushing oil.

Douglas Peake, the first mate of the supply boat that brought the box to the site, confirmed a radio transmission from the nearby vessel lowering the device that said the device would be in position over the well soon.

The transmission said undersea robots were placing buoys around the main oil leak to act as markers to help line up the 40-foot box.

A crane late Thursday lowered the containment vessel designed to collect as much as 85 percent of the oil spewing into the Gulf and funnel it up to a tanker. Eventually the crane would give way to underwater robots that will secure the contraption over the main leak at the bottom, a journey that would take hours.

A steel pipe will be installed between the top of the box and tanker. If all goes well, the whole structure could be operating by Sunday.

 
Last edited:

The Helper

Necromancy Power over 9000
Staff member
Reaction score
1,701
Bubble of methane triggered rig blast

The deadly blowout of an oil rig in the Gulf of Mexico was triggered by a bubble of methane gas that escaped from the well and shot up the drill column, expanding quickly as it burst through several seals and barriers before exploding, according to interviews with rig workers conducted during BP's internal investigation.

While the cause of the explosion is still under investigation, the sequence of events described in the interviews provides the most detailed account of the April 20 blast that killed 11 workers and touched off the underwater gusher that has poured more than 3 million gallons of crude into the Gulf.

Portions of the interviews, two written and one taped, were described in detail to an Associated Press reporter by Robert Bea, a University of California Berkeley engineering professor who serves on a National Academy of Engineering panel on oil pipeline safety and worked for BP PLC (BP) as a risk assessment consultant during the 1990s. He received them from industry friends seeking his expert opinion.

Read the news here.
 

The Helper

Necromancy Power over 9000
Staff member
Reaction score
1,701
Problem for Containment Dome in Gulf

Officials for BP on Saturday encountered a significant setback in their efforts to attach a containment dome over a leaking well on the seabed of the Gulf of Mexico, forcing them to move the dome aside while they find another method to cap the crude oil flowing into the Gulf since April 20.

Officials discovered that gas hydrates, ice-like crystals lighter than water, had built up inside the 100-ton metal container. The hydrates threatened to make the dome buoyant, and they also plugged up the top of the dome, preventing it from being effective.

“I wouldn’t say it has failed yet,” Doug Suttles, BP’s chief operating officer, said at a news conference in Robert, La. “What we attempted to do last night hasn’t worked.”

As a consequence, crews had to lift the dome off the well and place it on the seabed.

More.
 

SineCosine

I'm still looking for my Tangent
Reaction score
77
Maybe the oil still flows because the box is a lie ._.

“I wouldn’t say it has failed yet,” ...
....“What we attempted to do last night hasn’t worked.”

wad ._.
 

BlowingKush

I hit the blunt but the blunt hit me.
Reaction score
188
If the box is not used maybe they could put Sarah palin in it and leave it on the ocean floor
 

NightShade

Ultra Cool Member
Reaction score
31
^ seriously?

their lack of planning and fore-site is really embarrassing.

I wonder how this will screw up the environment. it's at the bottom of the ocean so the effects could be different. I also wonder how the oil gets released naturally.
 

Ninva

Анна Ахматова
Reaction score
378
I'm kinda surprised that TH.net hasn't talked about the tabloids that Russia is publishing, but I'll keep this to myself.
 

phyrex1an

Staff Member and irregular helper
Reaction score
447
I also wonder how the oil gets released naturally.
Oil wells usually have a higher pressure than the surroundings, once there is a pipe down it will come up by itself. During extraction you also pump down salt water (or other liquid) to keep the pressure high.

I'm kinda surprised that TH.net hasn't talked about the tabloids that Russia is publishing, but I'll keep this to myself.
Perhaps the reason it isn't discussed is because no one has any idea on what it is?

Anyway, some pictures: http://www.boston.com/bigpicture/2010/05/disaster_unfolds_slowly_in_the.html
 

NightShade

Ultra Cool Member
Reaction score
31
wow! those pictures are awesome!

how is sticking pipes into the ground to get the oil out natural?
 

ReVolver

Mega Super Ultra Cool Member
Reaction score
609
And this is why, children

we don't need oil.
 

phyrex1an

Staff Member and irregular helper
Reaction score
447

Miz

Administrator
Reaction score
424
We in Florida are not happy. Especially us on the Gulf coast, the oil companies here did just get their rights to offshore drilling closer to shore but since this incident with BP; they are going to be actually restricted from more areas then they were before the new bill. (If the situation gets anyworse, they might be kicked from the entire region all together)

I am really annoying with BP because when they convinced everyone that they were going to do Offshore drilling they told us this sort of thing wouldn't happen. Exactly, quote-unquote this issue would not occur, and if a leak did occur offshore it would be quickly contained.

It just doesn't seem like BP really gives a damn and I guess for their sakes and safety it doesn't hit Louisiana's Wetlands dramatically nor does it the Floridian Gulf Coast.

Oil like that is impossible to get out of the beach sand, and can only be taken out in time. Which doesn't seem like much but people don't go to the beach when the sand isn't nice and white like we brag about. Meaning a lost in tourism and upwards costs into the billions of dollars in losses.

My comments if the Oil does hit our Area in the Gulf:
"Well I guess for the Tampa Bay area, I just hope you're not a BP Worker of any kind or any customer in a BP gas station at the time of the news release. Because your safety can not be guaranteed"
 

T.s.e

Wish I was old and a little sentimental
Reaction score
133
I feel your pain, Miz. There have been several oil spills here on Norway's west coast, and we're still having trouble with the remaining oil slicks.
 

SineCosine

I'm still looking for my Tangent
Reaction score
77
Behold!
The solution!

20100514.gif

20100515.gif
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top