Sci/Tech Gigabit Internet for $70: the unlikely success of California's Sonic.net

tom_mai78101

The Helper Connoisseur / Ex-MineCraft Host
Staff member
Reaction score
1,706
SEBASTOPOL, CALIFORNIA—Two things set a one-block stretch of Florence Avenue apart from other American streets. One is the quirky metal sculptures planted in front of most homes; the other is the Internet traffic coursing through recently-strung fiber-optic cables on the block’s utility poles. They offer each house up to one gigabit per second in bandwidth, making this one of the fastest streets in America.

While some other cities can also brag about gigabit access, in this Sonoma County town it costs only $69.95 a month. The service comes courtesy of Sonic.net, the18-year-old Internet provider based in the neighboring city of Santa Rosa. And Sonic even throws in two phone lines with unlimited long-distance calling when you sign up.

Despite living on one of the best broadband streets in the country, almost none of the few dozen residents on Florence Avenue bother with the highest-end gigabit service, though. And why should they? Sonic's everyday 100 Mbps fiber offering costs just $39.95 a month, the same price Sonic used to charge for its 20 Mbps DSL connections (It includes unlimited phone, too.)

Compare Sonic’s 100 Mbps price to the two better-known area options for broadband—Comcast's Xfinity Extreme 105 Mbps service runs $199.95 a month, while AT&T's U-Verse tops out at 24 Mbps for $49.95.

 
Last edited by a moderator:

SouLEDGE

Damn you advanced calculus
Reaction score
75
I'm crying on the inside here.
Where I stay I'm paying $46 a month for a 1 Mbps connection
with - and here's the worst part - a 1 gig cap
 

Accname

2D-Graphics enthusiast
Reaction score
1,463
I'm crying on the inside here.
Where I stay I'm paying $46 a month for a 1 Mbps connection
with - and here's the worst part - a 1 gig cap
Internet is pretty good were i live, no cap, not too costly, but on the other hand its unreliable. Very often the connection is just gone for like 20 minutes. The cables are not very good or something, i dont know, but hey, its cheap.
 

WildTurkey

Previously known as giv_me_rep
Reaction score
87
I pay $60 a month for 2 terrabite adsl 2+ in AUS. Problem is i share the exchange with the University of Queensland, so my internet is almost always slow... Over the uni holidays however i can get up to 3Mbps, during uni semesters it goes down to 300kbps... SOOO GAY
 

Accname

2D-Graphics enthusiast
Reaction score
1,463
I pay $60 a month for 2 terrabite adsl 2+ in AUS. Problem is i share the exchange with the University of Queensland, so my internet is almost always slow... Over the uni holidays however i can get up to 3Mbps, during uni semesters it goes down to 300kbps... SOOO GAY
Our connection in the university is so fast that you usually download/upload things in an instant. Even data the size of gigabytes. At home i can onlydream of those things.
But many students go with the laptops/etc to university if they need to download a very big OS-update or similar big downloads.
 

camelCase

The Case of the Mysterious Camel.
Reaction score
362
I was about to say that you might be DL/UL'ing to an internal server but then I took a big OS update to the rest of the paragraph.
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Monovertex Monovertex:
    How are you all? :D
    +1
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top