Give feedback on my terrain please

NoxMortus

All Along the Watchtower
Reaction score
104
Please give me feedback on this, how to make it better, good points, bad points etc.
- I've used Noise-Smooth , but it isnt very evident, perhaps i need to get a bit more creative with that.
 

Attachments

  • terrain1.JPG
    terrain1.JPG
    74.7 KB · Views: 233

SD_Ryoko

Ultra Cool Member
Reaction score
85
I have some tips.

Cliff edges look nasty on water. two ways to beat this.

Make your river 3 units wider on both sides, and someone straight edges, then ramp them.

Or, flood that whole area, and use the raise / lower tool to make a smooth transition.

Gimme ten minutes to make, I'll post an example picture.

Plus....where is that waterfall comming from?!
 

NoxMortus

All Along the Watchtower
Reaction score
104
ok thanks, ill try to improve the river. The waterfall currently isnt coming from everywhere, this is just a 32x32 section, so when it is put into my map it will be coming from a lake :p
 

SD_Ryoko

Ultra Cool Member
Reaction score
85
OKAY! Heres my example. (sorry, it took 24 mins)

I flooded the area shallow water, then raised it all up with the raise tool.

Then used lower to sink it into the water real nice.

If you can't flood an area like that, use the ramping tools.

// Note

Now units can walk over the edges, into the water. If you don't like that, you can use a strip of larger pathing blockers to prevent that.
 

Attachments

  • bridge.jpg
    bridge.jpg
    73.8 KB · Views: 191

BrokenX

New Member
Reaction score
26
Very nice actually. and using the lower or raise tool is good to help fix ramps because sometimes they look unrealistic they are all straight or they got lopes in between them and it looks ugly as hell you can go over it with that and it looks by far better.
 

Rad

...
Reaction score
228
Only use straight cliffs if the water is wide... for rivers and creeks do what they said. And yea add more trees but it looks nice, waterfall should be coming from a cave or something though...
 

Jindo

Self
Reaction score
460
woah :eek:!

that looks really good Nox, the angle makes it better :D!!

Are you entering that into the terrain contest?

~Jindo
 

Rad

...
Reaction score
228
One thing u can also do, on the left half of the bridge the side comes out of the ground which kind of looks bad, either sink it in the ground or raise the ground to hide thesides untill the cliff :)
 
T

Tom_Green

Guest
Reply

It looks ok, but as already said, more envormental doodads, and more trees. Personally, I like to make the trees a little larger that the default settings, because it gives the area a nice oversized fantasy look. Also, the ground is too flat. Making obvious, but not too overdone hills n valleys adds to the terrain as well. Sky and fog are also nice touches.
 

UnknowVector

I come from the net ... My format, Vector.
Reaction score
144
I like to make the trees a little larger that the default settings, because it gives the area a nice oversized fantasy look

AT LAST A BELIVER!!! MAYA-SIN-OWING-NAO-HA ! lol ok sorry im done btw thats a attemped quote from warcraft2s Church... lol

Yea the terrain needs more hills its realy flat. And it needs once more a few more trees, after all theres lots of water and no trees... if its supposed to be a field and therefore has no trees the grass should be taller i think theres a grass modle out there somewhere, or at lest the grain modle or something. Once more the waterfall. And take off the pathing from some rocks downsize them and put them in the creek for a more creekish look. Whats with the lillypads? They get washed away and dont grow in rivers because of the current. If you want lillypads put them in a lake. Once more yes the bridge is a little messed up looking oon both sides, make sure its equaly overlapping both river egeas and use ctrl. + page up/page down. Some flowers? And is that a path in the middle? Make it more path like if it is otherwise use the thick grass and normal grass along with dirt not just one of them. Catails grow IN water and and stags live in forests.
 
T

Tom_Green

Guest
???

What the heck is warcraft2s Church? Ive only played WC 2 for like 1 min, and it was on Playstation 1 lol.
 

Sargon

New Member
Reaction score
83
It's a building you can build. It lets you upgrade your Knights into Paladins, and research spells for them.
 

Myzteryz

It only does everything.
Reaction score
90
i didn't notice until now that the topic was started in April'
Jindo have you? becuz with ur question...
 

Nenad

~Choco Coronet~ Omnomnom
Reaction score
137
Very nice terrain it looks very very nice i like it a lot. With Ryoko's ramp thingys it looks very realistic nice work 5/5
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1

      The Helper Discord

      Staff online

      Members online

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top