Strategy Protoss - 6 Gate Push

Bloodcount

Starcraft II Moderator
Reaction score
297
Style Type: All in, A good push punishing zergs for going mutalisks or power droning.
Skill level: Moderate
Style pro’s: Pretty strong against some zerg unit compositions, can be really powerfull with good enough unit control.
Style countered by: It is contered by more units, better unit control…
Most powerful in: Mid Game
Mach up: PvZ



Basic thought process and tips:
• This is a 2 base push. You need an expo.
• You can do it on 2 geysers. 3 is if you want to warp in only stalkers (or mostly stalkers)
• You don’t need more than 16 probes on minerals on both expos.
• If you have any extra ones, you can make more gateways
• Consider getting 1 robo, just for the observer, so you don’t die to burrowed roaches
• This is an all in, be persistent.
• You don’t need more than 4 sentries- they give you enough force fields for the amount of units that are going to engage.
• DO NOT GET SUPPLY BLOCKED
• Of course, bring a probe with you to build a proxy pylon. Do not wait for it to finish to engage though, you are giving out precious seconds. ^_^
• Do note: Killing overlords is fun AND beneficial to you.
• You can also rather smoothly transition into a double robo.


This build prepares you for:
• Mass Gateway Style
Mass gateway with robo support style



This build is prepared by:
4 gate


Final Word: Pretty good build, it went as far as killing idra in TSL ^_^



Screenshots:
coming soon
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1

      The Helper Discord

      Members online

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top