Salamander- W/S; New House Track

FireCat

FireCat

Oh Shi.. Don't wake the tiger!
Reaction score
536
Well, It sounds a hell of a lot better than your second one "aka Orchestral"
 
Nigerianrulz

Nigerianrulz

suga suga how'd you get so fly?
Reaction score
198
you gotta teach me how to do the windy wind up effect, ive looked on youtube found a tutorial but it was similar but not close enough yours sounded really clean :D
 
Whitesock

Whitesock

Graphics Help Zone Moderator
Reaction score
358
Oh that's just a 3xOsc with each on noise and a volume and LP connected to a slow rise automation. Also, I usually sidechain it to give it some rhythm.

Thanks for the responses guys! I've had an eye opener with the mixdown and mastering by doing a lot of research into it and it's definitely helping!
 
Nigerianrulz

Nigerianrulz

suga suga how'd you get so fly?
Reaction score
198
Whitesock said:
Oh that's just a 3xOsc with each on noise and a volume and LP connected to a slow rise automation. Also, I usually sidechain it to give it some rhythm.

Thanks for the responses guys! I've had an eye opener with the mixdown and mastering by doing a lot of research into it and it's definitely helping!
Click to expand...

I've been using that too but it doesn't sound like yours. Is your 3xosc all on the buzz noise? And its sidechained to a kick right?

We should do a collab some time :)

For collab purposes this is my first trance song
http://soundcloud.com/supermaneric/headlights
 
Nigerianrulz

Nigerianrulz

suga suga how'd you get so fly?
Reaction score
198
Whitesock said:
Yes we should definitely collab!

Yeah all 3 are on noise. And I usually make a separate, silent kick sidechain for it so I can run it if I decide to drop out the kick. Want to see the .flp of it?
Click to expand...

do you have plugins or VST that i wont have?

I've finally figured out the wind now after playing around with some EQ and using the gross beat for side chain :D

how should we do this collab :O
 
Whitesock

Whitesock

Graphics Help Zone Moderator
Reaction score
358
You're using FL right? How about you start it off. I'm currently about to start the mixdown for my new song right now so I need a day or so to get this done.

And yeah I do have some on there you probably don't have but not for the noise riser. I can give em to you if you want (they are all freeware :D). Let me know if you still want the flp
 
Nigerianrulz

Nigerianrulz

suga suga how'd you get so fly?
Reaction score
198
Whitesock said:
You're using FL right? How about you start it off. I'm currently about to start the mixdown for my new song right now so I need a day or so to get this done.

And yeah I do have some on there you probably don't have but not for the noise riser. I can give em to you if you want (they are all freeware :D). Let me know if you still want the flp
Click to expand...

Yeah hopefully ill start something soon, gotta finish some work for uni first D:

I don't mind having some extra plugins to use :D. Is synth1 in your collection? :O
 
Whitesock

Whitesock

Graphics Help Zone Moderator
Reaction score
358
I think so. If not I need to pick it up anyways because I heard it is really good.

Plugins I'm in love with atm (all free):

TALnoisemaker (vsti)
Stringsynth (awesome for beefing up pads vsti)
SuperwaveP8 (awesome all around, but uses a ton of cpu vsti)
Crystal (dat epiano preset mmmm vsti)
Asynth (for risers that give some energy to pads vsti)

Epicverb (amazing reverb vst)

I think that's pretty much all I'm using now outside of native FL plugins. I have a good amount of orchestral patches and some really nice drum patches I use too. I'll pass em on to you if we end up using them.

Also I have the producer's edition instead of the xxl edition, so no maximus for me. :( Not that it's a huge deal though. I think the limiter is an amazing compressor.
 
You must log in or register to reply here.
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
     +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
     +1
  • The Helper The Helper:
    Here is a great appetizer recipe Texas style! https://www.thehelper.net/threads/recipe-chicken-stuffed-poblano-peppers.194086/
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
     +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    New dessert for Summer - https://www.thehelper.net/threads/recipe-lemon-blueberry-layer-cheesecake.194113/
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
     +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
     +2
  • V-SNES V-SNES:
    Happy Friday!
     +1

      The Helper Discord

      Members online

      No members online now.
      Online now:
      110 (members: 2, guests: 108)

      Share this page

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top