The Spell Request Thread!

Status
Not open for further replies.

bLu3_eYeS

New Member
Reaction score
31
Im sorry.Can i request 2 spells at once ? Its not a spellpack :D

Spell Name: Electric Eye

Spell Type: MUI

Description: The caster puts a invisible ward(has true sight). If a enemy unit acrosses it within 200 range it will be visible for the crossing enemy. When the crossing enemy walks away from 200 it becomes back invisible.
Level 1: max 2 wards
Level 2: max 3 wards
Level 3: max 4 wards
Level 4: max 5 wards

Wards have ability to detonate that will silence enemyes in 350 range of the triggering ward

Spell Name: Marksman's Shot

Spell Type: MUI

Description: The caster targets a enemy unit , channeling 3,75 seconds and after releasing a poisonous bolt that will deal:
Level 1: 250 +10% of the current hp of the target
Level 2: 250 +20% of the current hp of the target
Level 3: 250 +30% of the current hp of the target

Other Remarks: If possible add a effect with a target or a arrow at overhead of the target.

Thanks !!!
 

Ayanami

칼리
Reaction score
288
if you could Glenphir can you make it easy to configure the spell as well.

Sure. I'll use "Item - Attack Damage" for the seals.

Im sorry.Can i request 2 spells at once ? Its not a spellpack :D

Spell Name: Scout Wards

Spell Type: MUI

Description: The caster puts a invisible ward(has true sight). If a enemy unit acrosses it within 200 range it will be visible for the crossing enemy. When the crossing enemy walks away from 200 it becomes back invisible.
Level 1: max 2 wards
Level 2: max 3 wards
Level 3: max 4 wards
Level 4: max 5 wards

Wards have ability to detonate that will silence enemyes in 350 range of the triggering ward

Spell Name: Marksman's Shot

Spell Type: MUI

Description: The caster targets a enemy unit , channeling 3,75 seconds and after releasing a poisonous bolt that will deal:
Level 1: 250 +10% of the current hp of the target
Level 2: 250 +20% of the current hp of the target
Level 3: 250 +30% of the current hp of the target

Other Remarks: If possible add a effect with a target or a arrow at overhead of the target.

Thanks !!!

I'm sorry but I don't take 2 spell requests at once. It isn't fair for the others. Please post 1 spell request first.

Updated spell status and new spell requests.
 

adeoin

Member
Reaction score
11
uhh sorry Glenphir I actually got Divine Punishment and its done could you do another one though?

Code:
Charge Arrow

MUI/MPI

Its a passive ability

Charge Arrow: The archer charges her arrow each time her normal attack successfully does damage to a hero. Once fully charged The archer releases a giant shock wave of energy in to a straight line.

Level 1 - Takes 40 shots to fully charge. Full charge blast deals 100 damage

Level 2 - Takes 30 shots to fully charge. Full charge blast deals 150 damage

Level 3 - Takes 20 shots to fully charge. Full charge blast deals 200 damage.

Other remarks: If you could can you add a special effect each time it charges.
So if you are willing to do this thanks :D
if not I understand and thanks anyways
 

Ayanami

칼리
Reaction score
288
uhh sorry Glenphir I actually got Divine Punishment and its done could you do another one though?

Code:
Charge Arrow

MUI/MPI

Its a passive ability

Charge Arrow: The archer charges her arrow each time her normal attack successfully does damage to a hero. Once fully charged The archer releases a giant shock wave of energy in to a straight line.

Level 1 - Takes 40 shots to fully charge. Full charge blast deals 100 damage

Level 2 - Takes 30 shots to fully charge. Full charge blast deals 150 damage

Level 3 - Takes 20 shots to fully charge. Full charge blast deals 200 damage.

Other remarks: If you could can you add a special effect each time it charges.
So if you are willing to do this thanks :D
if not I understand and thanks anyways

To detect damage done on attack, I'll have to make this skill a buff placer, is that okay?

@Chaos_Knight
I can't exactly make the lightning black. You want any alternative color other than black? Or do you have a custom black lightning effect that you want me to use?
 

DuelPlayer

Member
Reaction score
21
Sorry but to tell you I do not need your help to help me make my spell.
It is already done by someone else.:p
 

adeoin

Member
Reaction score
11
@Glenphir: sure :D but you don't have to detect damage do you? Not sure about this but can't you use an event like A Unit Is Attacked which detects when the attack animation is ran i think...

But yeah I don't know much so do what you need

Thanks
 

Chaos_Knight

New Member
Reaction score
39
To detect damage done on attack, I'll have to make this skill a buff placer, is that okay?

@Chaos_Knight
I can't exactly make the lightning black. You want any alternative color other than black? Or do you have a custom black lightning effect that you want me to use?

Use whatever you want. Just not something bright.
 

Ayanami

칼리
Reaction score
288
@Glenphir: sure :D but you don't have to detect damage do you? Not sure about this but can't you use an event like A Unit Is Attacked which detects when the attack animation is ran i think...

But yeah I don't know much so do what you need

Thanks

Well it was because of "successfully does damage to a hero". I was thinking that if the attack was evaded, it wouldn't count.

Completed the spell Bless of Darkness.
 

Attachments

  • Bless of Darkness.w3x
    23.6 KB · Views: 458

bYo

New Member
Reaction score
5
I could probably do this spell but I know it would work a lot better and look a lot cooler if you did it :p.

Spell Name: Eye of the Storm

Spell Type: MUI

Description: Creates a swirling vortex of storm clouds at the caster's location (AOE of around 250 I'm thinking). Lightning strikes around the Eye, dealing (damage equal to Caster's INT x Level of Spell + Variable called Lightning Charge which I've already got). Winds also circle the storm, slowing all movement speeds by 80%. The centre of the aoe is unaffected (hence the name).

Other Remarks: Just wanting it to look nice and cool since most of my other spells are lacking in visual effect. Was thinking swirling clouds for the wind, maybe even a ring of lightning strikes around the centre. Whatever, I like creative :D.

Don't need this done by any particular time, so I hope you have fun if you decide to make it. Thanks anyway.
 

Malkoth

New Member
Reaction score
1
Hey, here is smth that i could use :)

Penance

Spell Type: Does not have to be MUI.

Description: Channels up to 5 seconds, sending holy bomb each second on friendly target, healing him for 35/70/105/140 each. If used on enemy, it will damage for 25/50/75/100 each second.

Other Remarks: I know you made this spell in your former spell request thread. However, when your former spell trigger is mixed by some other spells trigger's from here (example, Tinki3's Omnislash) it makes other triggers not to work. If i have Penance trigger activated, and Omnislash trigger activated, Omnislash will not work but your penance will. If penance is disabled, Omnislash will work propertly. So please, if you are able and have time, make this one for me, in a way if possible, not to make other triggers not to work. Thanks in advance man. :)
 

Ayanami

칼리
Reaction score
288
@ HeX.16
About your spell, you said it slows the enemy by 25% for 3 * Level seconds. When you said you want it to stack up to 6 times when maxed, are you referring to the duration or the slow factor?
 

HeX.16

Isn't Trollin You Right Now
Reaction score
131
Hmm just durration. Else if you lower the slow to 15% you can make it both:thup:
Either doesnt bother me:thup:
 

Devalut

TH.net Regular
Reaction score
7
If you can't do this spell then ill state a different one below, ill put a line of '*' so u can see

Energy shield (dumb name i know)
active
250 mana
30 sec duration
absorbs 500 spell/physical damage before breaking

**********************************************
(if u can't do it)

soul shot
active
10 sec cooldown
25x(# of souls) mana
on cast it fires a bolt of energy that deals 50 damage.
if it deals a killing blow the damage will permanently increase by 2.
but if it is not a killing blow it will loose 5 souls.

passive: each soul adds 0.01% mana regeneration.
each soul adds 0.25 damage to the caster.

please and thank you!

D.
 

Ayanami

칼리
Reaction score
288
If you can't do this spell then ill state a different one below, ill put a line of '*' so u can see

Energy shield (dumb name i know)
active
250 mana
30 sec duration
absorbs 500 spell/physical damage before breaking

**********************************************
(if u can't do it)

soul shot
active
10 sec cooldown
25x(# of souls) mana
on cast it fires a bolt of energy that deals 50 damage.
if it deals a killing blow the damage will permanently increase by 2.
but if it is not a killing blow it will loose 5 souls.

passive: each soul adds 0.01% mana regeneration.
each soul adds 0.25 damage to the caster.

please and thank you!

D.

About your energy shield, it absorbs both magic and physical damage, right? If so, yes it's possible for me to do it.
 

Laiev

Hey Listen!!
Reaction score
188
Glenphir I don't will request nothing :p this is a OT just to you know, I love your avatar, is so cute
pucca.gif
 
Status
Not open for further replies.
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1
  • The Helper The Helper:
    New recipe is another summer dessert Berry and Peach Cheesecake - https://www.thehelper.net/threads/recipe-berry-and-peach-cheesecake.194169/

      The Helper Discord

      Members online

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top