TheHelper Town - The Official TheHelper.net MyMiniCity City

The Helper

Necromancy Power over 9000
Staff member
Reaction score
1,701
Thanks to our boys working Yarold's we have managed to cross the 1000+ a day population mark. I also discovered a couple of new tricks with the exchanges that I am unfortunately not including in the FAQ :p

Time will tell whether we can average 1000 pop a day but if we can keep this up for a while we should gain some higher ranker pretty quick. Thanks for all your help guys!
 

UndeadDragon

Super Moderator
Reaction score
447
I will be away for the next couple of days, so I won't be able to do Yarolds. I have quickly gotten 400 credits on it which should last a day and a bit, but they might not last the full 2 days. I will get a few more, but I have to go in a couple of hours, so I probably won't get much more.
 

The Helper

Necromancy Power over 9000
Staff member
Reaction score
1,701
I wonder if Da_skunk would be willing to work Yarolds while you are away. Yarolds is one of the main reasons we are catching up right now even though those 400 credits you amassed will last a day. I am on the last day before my Windows deactivates on this computer so hopefully replacing the hard drive with my crashed motherboard computers hard drive with good windows will keep me up but it is possible I could be out of a computer again for a couple of days.
 

Daskunk

SC2 Forum MVP - TheSkunk #386
Reaction score
186
I wonder if Da_skunk would be willing to work Yarolds while you are away. Yarolds is one of the main reasons we are catching up right now even though those 400 credits you amassed will last a day. I am on the last day before my Windows deactivates on this computer so hopefully replacing the hard drive with my crashed motherboard computers hard drive with good windows will keep me up but it is possible I could be out of a computer again for a couple of days.
I would like too, but I've been busy now that school started, and I don't think ill have time.

I can still visit the site while I'm here though! :D *Goes to thehelper town*

Does anyone but me still go to KJ's?

KJ's:
Unemployment 5%
Transport 95%
Crime rate 6%
Pollution 6%

EDIT: I stilll haven't gotten into a dynasty either. A guy "Mailed" me to say wellcome in; acting like he accepted me, but it does seem like I'm in one.. Well, sorry I couldn't help this time. =/
 

UndeadDragon

Super Moderator
Reaction score
447
EDIT: I stilll haven't gotten into a dynasty either. A guy "Mailed" me to say wellcome in; acting like he accepted me, but it does seem like I'm in one.. Well, sorry I couldn't help this time. =/

Try joining the International Mmc aliance. I got into their Dynasty really easily. I get about 200+ credits a day from them and I am not sure how many clicks.

Oh yes, and btw I am back :p
 

Daskunk

SC2 Forum MVP - TheSkunk #386
Reaction score
186
Try joining the International Mmc aliance. I got into their Dynasty really easily. I get about 200+ credits a day from them and I am not sure how many clicks.

Oh yes, and btw I am back :p
I did try to join that one.

I got a message saying "Wellcome" and I appeared on the list of members, but dynasty exchange remains empty.

It doesn't really matter though, becuase I would be too busy to use it anyways.
 

UndeadDragon

Super Moderator
Reaction score
447
Rank #17! We beat Idarionis :)
 

Prometheus

Everything is mutable; nothing is sacred
Reaction score
590
woot.gif
 

The Helper

Necromancy Power over 9000
Staff member
Reaction score
1,701
Back to #18 (once more) :p

His stats show that he stepped it up as soon as we passed him. We might see saw back and forth for a while. If we can get Yarolds going full power we should be able to put some distance depending on what he is doing.

Here are his stats

http://mmc.urs.tw/detail.php?mmc=idarionis

go to the bottom and check the daily history and notice the jump from 665 to 920 in population.
 

enouwee

Non ex transverso sed deorsum
Reaction score
240
His stats show that he stepped it up as soon as we passed him.
Already some time before getting passed (times in GMT+2):

attachment.php


go to the bottom and check the daily history and notice the jump from 665 to 920 in population.
No need to, I have more fine-grained data. It's also better suited for drawing useless graphs. :D

growth.png
 

UndeadDragon

Super Moderator
Reaction score
447
Looks like I will need to do some overtime on Yarolds.
 

Prometheus

Everything is mutable; nothing is sacred
Reaction score
590
Id-Whatever is at 16, we're at 18 and there is someone new infront of us. :(
 

The Helper

Necromancy Power over 9000
Staff member
Reaction score
1,701
No there isn't. We just passed Retromundi. You just saw when they passed them. We are now 17 right behind Id-whatever.

Something happened yesterday - we lost 200 clicks on our population. I guess possibly Id-whatever could have redirected all the hits for us to non population on his link exchange. It is probably what I would have done if I were him. Interesting to see if this trend continues.
 

Prometheus

Everything is mutable; nothing is sacred
Reaction score
590
Id-whatever has a link exchange? And we're using it?
>.>'
 

enouwee

Non ex transverso sed deorsum
Reaction score
240
Something happened yesterday - we lost 200 clicks on our population. I guess possibly id-whatever could have redirected all the hits for us to non population on his link exchange. It is probably what i would have done if i were him. Interesting to see if this trend continues.

Not really. It looks more like the normal fluctuation, just compare against the last 30 days (yesterday at the very bottom). If you're getting more hits (>1900), they go into "Other" most of the time.

Why didn't you submit the redirection page hosted on your own site, rather than hoping that some third party doesn't "cheat"?

Code:
[b]Pop     Com     Other   Total[/b]
1011    44      858     1913
894     59      715     1668
827     77      798     1702
1477    96      1521    3094
799     40      770     1609
773     44      963     1780
717     50      783     1550
936     47      659     1642
902     37      868     1807
717     44      819     1580
897     36      627     1560
764     59      761     1584
742     46      782     1570
818     42      729     1589
816     48      795     1659
834     67      852     1753
872     40      879     1791
865     41      904     1810
826     52      895     1773
927     45      778     1750
886     53      872     1811
895     55      1038    1988
935     55      957     1947
1066    56      837     1959
885     51      820     1756
897     36      836     1769
767     41      1011    1819
919     49      736     1704
893     56      1002    1951
[B]804     59      1043    1906[/B] (yesterday)
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Monovertex Monovertex:
    How are you all? :D
    +1
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top