Strategy Zerg - 14 gas, 14 pool

Bloodcount

Starcraft II Moderator
Reaction score
297
Build Type: Safest Zerg Expansion Opening
Skill level: Easy
Build Pro’s: Aggressive opening, safe from most rushes, can easily transition into an aggressive roach/zergling/baneling, zergling/baneling, or roach/zergling push; easy to tech to tier 2 due to the early gas. Safest opening that zerg has, it is thought to auto-block virtually all types of early aggression.
Build countered by: There is no true hard counter to this build since you can easily organize an attack with it, but some macro openings such as 16 supply nexus or 1 barracks Command Center will set you behind in the macro game if you don’t pressure. In ZvZ it is weak against a 6-8 pool
Most powerful in(league): Any
Mach up: ZvP, ZvT



Foreword
This build is extremely easy to pull off, effective, but not too much macro orientated


Basic BO:
• 14 gas
• 14 pool
• 14 scouting drone
• 16 overlord
• pull drones off gas when you have 100
• Make a queen, metabolic boost, and 2-6 lings when your pool is done
• Expand at 20-21 supply
• Make a second queen and 1 more overlord. then return the drones on gas
Consider getting a third queen just for faster creep spread
What you do from here is your call

Tips:
• You need just 100 gas, you don’t need any more so for the time being. You need to use the extra drones to get ~300 more minerals than you wouldn't have if you didn’t pull them off gas
• Once you are on 2 bases you don’t really need 2 queens as soon as possible. Why? You don’t have the income to use more than 10 larva per minute. You get 3 larva from your Hatch every 45 seconds and 4 more from the inject (note: when larva is more than 3, only inject will increase it, so you'd better use all of it, instead of wasting it by not being able to support it) The second queen comes at the right time.
• The lings are 2 for the watch towers and 2-4 to put pressure on him. 2 lings are more than enough, but if he is protoss, with 4 you can put a good amount of pressure on his wall in, since he won’t have a stalker yet.
• Speed will come at a decent time so you are safe from all rushes. You don’t need to fear any pylon blocks since your lings will clear it in a second.


Example Follow ups:
• You can really easy go 2 base mutalisk from here, you already have zergling speed
• You can go zergling/mutalisk/baneling
• You can make a mid game tier-1-units-push
• You can utilize drops too
• or go for zergling-infestors
• or roach-infestors (zvz)
• One thing you shouldn't go is zergling-hydralisk

Final word DarkForce and mOOnGladE have this as a standard opener, along with every aggressive zerg out there. This BO is extremely potent. The only downside is that it isn’t as macro orientated as builds such as the 14 hatchery.


Here are a few screenshots:
• ~3:11 starting metabolic boost and the first queen


371437ab631b279a.jpg


• Clearing out the probe/scv with the 2 zerglings and getting the expansion ~4:11

0d382300d5379547.jpg


I think that the formating is better, however it might need some more improvements. Thoughts ? :]
 

Whitesock

Graphics Help Zone Moderator
Reaction score
358
This is also considered a very safe opening against virtually all forms of early aggression (excluding like a 6-10 pool of course). You might want to add that in.

For formatting, try to vary font sizes for such things as headers. It'll make your tutorial have more obvious sections which will help guide a newbie's eyes.
 

Bloodcount

Starcraft II Moderator
Reaction score
297
>This is also considered a very safe opening against virtually all forms of early aggression (excluding like a 6-10 pool of course). You might want to add that in.

Added. Thanks for reminding me to add it. It is soo obvious for me I didn't really consider a need to add it lol.

>For formatting, try to vary font sizes for such things as headers. It'll make your tutorial have more obvious sections which will help guide a newbie's eyes.

Will do but tomorrow, now it is time for me to go to sleep. :]

I am planning to realease 2 tutorials tommorow, both of which are very fun to execute (one of them is really hard though, hell, I have trouble executing it at times (not that I am that good, but still))
 

Sim

Forum Administrator
Staff member
Reaction score
534
Can it resist a 6-pool in Zerg ditto?
 

Bloodcount

Starcraft II Moderator
Reaction score
297
Well...

1 If your micro is good enough you can stop 6 pool only with workers. A friend of mine (season 1 top 50 in europe) is a protoss player who used to stream a lot. When he got s pooled, he abused the "worker ghost bug" and that way backed up.

his real apm (not the spam) is over 200 though...

that being said, unless you micro good, no this build isn't safe from a 6 pool. I will edit the tut ^_^

Edit: it is edited, I added a 6-8 pool in the weakness section. :]
 

Bloodcount

Starcraft II Moderator
Reaction score
297
Added screenshots, tweaked a few things, added a bit of extra info.

Edit:
I know that the list of follow ups, may not be clear to everyone, that is why I will make tutorials that cover different styles of play, for example ling-bling-muta or MMM or roach hydra. When I have made them, I will turn the list into links leading to them.
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top