Environment Recent and Future Outlooks for Nuisance Flooding Impacts on Roadways on the US East Coast

tom_mai78101

The Helper Connoisseur / Ex-MineCraft Host
Staff member
Reaction score
1,712
Tidal floods (i.e., “nuisance” flooding) are occurring more often during seasonal high tides or minor wind events, and the frequency is expected to increase dramatically in the coming decades. During these flood events, coastal communities’ roads are often impassable or difficult to pass, thus impacting routine transport needs. This study identifies vulnerable roads and quantifies the risk from nuisance flooding in the Eastern United States by combining public road information from the Federal Highway Administration’s Highway Performance Monitoring System with flood frequency maps, tidal gauge historic observations, and future projections of annual minor tidal flood frequencies and durations. The results indicate that tidal nuisance flooding across the East Coast threatens 7508 miles (12,083 km) of roadways including over 400 miles (644 km) of interstate roadways. From 1996–2005 to 2006–2015, there was a 90% average increase in nuisance floods. With sea level rise, nuisance-flood frequency is projected to grow at all locations assessed. The total induced vehicle-hours of delay due to nuisance flooding currently exceed 100 million hours annually. Nearly 160 million vehicle-hours of delay across the East Coast by 2020 (85% increase from 2010); 1.2 billion vehicle-hours by 2060 (126% increase from 2010); and 3.4 billion vehicle-hours by 2100 (392% increase from 2010) are projected under an intermediate low sea-level-rise scenario. By 2056–2065, nuisance flooding could occur almost daily at sites in Connecticut, New Jersey, Maryland, the District of Columbia, North Carolina, and Florida under an intermediate sea-level-rise scenario.

Transportation infrastructure in coastal regions is vulnerable to coastal extreme events today; this vulnerability will increase with sea level rise (SLR), enhanced storm surge from tropical and nontropical storms, and land subsidence (1,2). Hurricanes have caused billions of dollars in direct damage to coastal roadways and bridges. Significant economic losses have also occurred due to transport disruption during and after these storms. Currently, 60,000 miles (96,561 km) of roadways are exposed to coastal storms, as noted in Douglass et al. (2). In the future, rising seas will cause more frequent disruptions, more damage, and storm surge impacts to extend further inland.

In some coastal areas, impacts are not limited to storm events. Critical transportation infrastructure is at risk from SLR alone. SLR-induced coastal flooding decreases service and increases maintenance costs for existing facilities; mitigation strategies will be an increasingly critical aspect of transportation planning, design, and operations and maintenance (3–5). Numerous transportation agencies have identified assets vulnerable to permanent inundation for sea-level-rise scenarios for the United States that range from an increase in 1–8.2 feet (0.305–2.5 m) by the year 2100 with sea-level-rise values along the U.S. Atlantic and Gulf Coasts likely to be greater than the global average (6).

 
Last edited by a moderator:
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1
  • The Helper The Helper:
    New recipe is another summer dessert Berry and Peach Cheesecake - https://www.thehelper.net/threads/recipe-berry-and-peach-cheesecake.194169/

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top