Help using X Y Z Axis on Doodads/Destructibles

Glivee

The Swedish Moose
Reaction score
34
Hi!

I have searched the forum with no luck at all and i decided to start this thread.

I know there is a way to change the axis of several/all doodads (and Destructibles?)

Ive seen this being made before and i really need the help on finding how to.
Im making those instance wall's that i want to be long enough for the 3'd-person cam
not to see over them. I know i can resize what im using as wall's atm but i dont want
only that. I want them to be only higher now (I guess that's the Y axis?).
_________________________________________________________________
Adding Update's for new reader's up here:
Then they dont have to read all post's

I have looked around a quickie in the Objekt-editor (Just shallow, no deep investigation
so i might have missed it) and i have found no Doodads/Destructibles that have that
as option's, changing the X Y Z axis.
_________________________________________________________________
Added the Picture below up here:

36690950c1f1f806e4f59b6dda00b472f1e2888.jpg

_________________________________________________________________
Another picture describing the X Y Z Axis:

Just a picture of the three Axis and the Y axis that i want to modify.

36696597c71e8b1bffdb06d3fcac2f12ac1e721.jpg

_________________________________________________________________
What i dont need to know:

I am able to modify all the Axis using Shift + PgUp/PgDown but only to a certain point.
Then it stops. And i also just want to change the Height.

Im sure ive seen that you can modify the Axis using something in the Objeceditor
or wherever i saw that.

I know there is a way to change it just using the WE and using the War3modeleditor
on every singel item that i need to be fixed is just gonna take ages.
_________________________________________________________________
IMPORTANT:

The way you heighten an Doodad/Destructible with Shift + PageUp / PageDown
might also be able to get to the maximum height.

Would be appreciated if someone with enough skills confirmed this!
_________________________________________________________________



Help would be appreciated and thanks in advance :)
 

Renendaru

(Evol)ution is nothing without love.
Reaction score
309
If you want to raise something I think you do ctrl +Page up & down? Something like that. It's some keystroke...
 

Glivee

The Swedish Moose
Reaction score
34
Ah yeah well that i know but was not what i meant :)

Im trying to make it Higher. Stretch it out.

Code:
                       ##
                       ##
                       ##
                       ##
                       ##     ##
                       ##     ##
                     After   Before

Make the right one of this hilarious demonstration look like the one on the left side after i have changed the Y axis (i think it's the one for height)

And yes i know i can raise and put 2 of the same on-top of eachother but that's still not what im looking for :)
 

chovynz

We are all noobs! in different states of Noobism!
Reaction score
130
http://www.thehelper.net/forums/showthread.php?t=32561

Not sure I understand your first post. Can you clarify?

Play around with keypad + and - and home and end (remember to try using ctrl and shift when experimenting). Make sure you set the Art minimum and maximum scale in object editor to something other than 1.00.
 

simonake

New Member
Reaction score
72
You can modify axis with programs like War3ModelEditor. You get what you want in and you can modify them like you want to. And btw, if you had a sheet you would see the Y like this: |, the x like this: ¯ and the z like a point: .

The z is like the 3D
 

Glivee

The Swedish Moose
Reaction score
34
Sorry for Double-post

Play around with keypad + and - and home and end (remember to try using ctrl and shift when experimenting). Make sure you set the Art minimum and maximum scale in object editor to something other than 1.00.

That helped a bit. I am able to modify all the Axis using Shift + PgUp/PgDown but only to a certain point. Then it stops. And i also just want to change the Height.

Im sure ive seen that you can modify the Axis using something in the Objeceditor or wherever i saw that.

Thanks anyway :)
 

simonake

New Member
Reaction score
72
You can use this War3modeleditor. it wont "fuck" ,sorry, everything on the axis you used.
 

Glivee

The Swedish Moose
Reaction score
34
You can use this War3modeleditor. it wont "fuck" ,sorry, everything on the axis you used.

I know there is a way to change it just using the WE and using the War3modeleditor on every singel item that i need to be fixed is just gonna take ages.

Thanks anyway :)
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top