Lightning Blast Spell

Nethrezim

New Member
Reaction score
2
I want to make a spell that sends out lightning in a line from the caster towards a target location. Lightning arcs like the ones from Chain Lightning spells.



There should be 5 main arcs branching from the caster. The lightning doesn't have to hit the targets like Chain Lightning does, it can pass through them, the damage is important.

What spells should I use as a base and as dummies? If someone could make a triggered template that would be great. In the mean time I'm going to try to figure it out myself. My spell-making knowledge pretty much resumes to this: http://world-editor-tutorials.thehelper.net/cat_usersubmit.php?view=92873

Thanks in advance
 

Shura

New Member
Reaction score
45
You could create 5 dummy units to cast chain lightning. Each one would cast to the target point with a little offset to create the effect you want. Then you would have to run a trigger when the ability is cast to pick every unit that would be damaged and damage them. It would be a bit tedious to make the triggers, so if you are having trouble, I could try making them.
 

Nethrezim

New Member
Reaction score
2
Hmm I'm just wondering how do you trigger the dummies to cast lightning at a certain point. And make the lightning bolt jagged at the same time.:)
 

Nherwyziant

Be better than you were yesterday :D
Reaction score
96
I already have this spell, but I can't give you the triggers, since my computer is dead, my spell is very awesome and doesn't need any dummies or stuffs, just the triggers and it's vJass which is awesomer ^_^ and by the way, You can't cast chain lightning at a point, it's a unit target spell.
 

Nethrezim

New Member
Reaction score
2
Yeah that's what I was talking about. Anyway I don't want vJass I want it triggered only. So about the chain lightning I can't just cast it on a unit from each dummy because who knows where the lightning will arc. Any suggestions?
 

mylemonblue

You can change this now in User CP.
Reaction score
7
I used to be more of a GUI person, but it's pretty limited when it comes to removing leaks and MUI/MPI. I still do not know much about JASS, but it just seems to be more natural. But that's off-topic.

You could have the dummies offset from the hero so that the lightning flashes from different points :?
 

Nethrezim

New Member
Reaction score
2
@ Undead.Cow: what do you eat vJass with?:p

@ mylemonblue: I'm not really sure whether I can calculate the offsets to be in line with the target location. :confused:
 

Ayanami

칼리
Reaction score
288
This spell can be easily done in GUI actually. You just need to use lightning effects and offsets.
 

Nethrezim

New Member
Reaction score
2
Ok but what spell should I use as a base? And how do I link the lightning effects to go in a line towards the target location?
 

Ayanami

칼리
Reaction score
288
Well you could use channel as the base ability. Basically, move the lightning periodically. This would make it seem as if the lightning is extending outwards.
 

mylemonblue

You can change this now in User CP.
Reaction score
7
Theory: Have the lightning be a dummy model with permament immolation and a base model of the missile "Storm Seer/BronzeDrake/etc". Then have a trigger move it every .55 seconds to the locations and then..... Um.... Never mind... :eek:
 

Nethrezim

New Member
Reaction score
2
Here's what I got visually.



The Code



Haven't added the expiration timer yet to study the effects better. Now, as you can see no matter where I target the spell the first 6 arcs branch out up, not towards the target or where the caster was facing. Any idea to trigger it to branch out where the caster is facing? Or towards the target?
 

Ayanami

칼리
Reaction score
288
Calculate the distance between the caster location and the target point. Then, set an offset = offset of LocOffset by distance between caster loc and target point towards angle between caster loc and target point. Put this action inside the loop.
 

Ayanami

칼리
Reaction score
288
For your first lightning trigger, target should be LocOffset. For your second lightning trigger, source should be LocOffset and target should be AngOffset.
 

Nethrezim

New Member
Reaction score
2
Sorry to double post, but BUMP! I really want to finish this ability faster:D

Can anybody tell me how to get the effect I want? And also how do I make the lightning disappear after 0.50 - 1.00 seconds? I tried generic unit timer and countdown timer and they didn't work.
 

Ayanami

칼리
Reaction score
288
Sorry to double post, but BUMP! I really want to finish this ability faster:D

Can anybody tell me how to get the effect I want? And also how do I make the lightning disappear after 0.50 - 1.00 seconds? I tried generic unit timer and countdown timer and they didn't work.

The Arcs obviously goes upwards because you set a value of 0.00 for your real. You'll need to do this.

Trigger:
  • Actions
    • Set Real = ((Facing of Caster) - 90)
    • For each (Integer A) from 1 to 6, do (Actions)
      • Loop - Actions
        • Set LocOffset = (CasLoc offser by 200.00 towards Real degrees)
        • Lightning - Create a Chain Lightning - Primary lightning effect from source CasLoc to target LocOffset
        • Lightning - Create a Chain Lightning - Primary lightning effect from source LocOffset to target AngOffset
        • Set Real = (Real + 36.00)


As for your expiration question, does this spell need to be MUI?
 

Nethrezim

New Member
Reaction score
2
Well I don't know anything else besides triggering.

EDIT: And thanks, visually works fine now.:D
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1
  • The Helper The Helper:
    New recipe is another summer dessert Berry and Peach Cheesecake - https://www.thehelper.net/threads/recipe-berry-and-peach-cheesecake.194169/

      The Helper Discord

      Members online

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top