My Starcraft Lag Problem

K

kaiser_soze

Guest
Hey guys I really need help here! :)
So I had cable before on an IBM with Windows Me and my starcraft worked fine on that computer!
Now it's been about 9 months and i have a new computer now with windows XP and DSL now instead of cable, so everything on my computer is nice

I've had a router both times but I have a new one with this computer than i had before!

Why the hell am I lagging? I can only join 1v1s!
If I try and join any other game it counts down the 5 seconds and then waits a couple of seconds, then in game it lags bad!
plus messages I send can only be seen by the game hoster and I can only see his messages!

It's really quite a kunundrum!

PLEASE HELP :confused:
 

BrokenX

New Member
Reaction score
26
You could possibly have a firewall which disallows you to join certain games if that makes sense... change your settings on starcraft if you havn't already. Also I would recommend using ad-aware se professional, this will help clean out your computer, maybe causing bit less lag.





BrokenX
 
K

kaiser_soze

Guest
thanks

ya i've used ad-aware, i've defragmented my computer, i've allowed ports 4000 and 6112-6120 on my Norton internet security, and any game more than 2 players i can't join without making it lag!
I don't know the password to my router so I'm kind of screwed on that level!

(and how do I change settings in starcraft, it's not as easy as other games i play where there's a settings button!!) :p

-Thanks
 

BrokenX

New Member
Reaction score
26
Try going to ad-aware and use custom scan, set it so it doesn't skip files larger then 4000kb sometimes it misses alot of chucks, also norton make sure you update it sometimes it can be choppy as well scanning, I like ad-aware because you get to see what type of file it is, and the source of it, im not sure if the new nortan does that but yeah, I like to see whats going on. Maybe you have your computer settings set at lower gz lol. Not that it is but maybe the person set it wrong. I forget how to change it, I remember I thought I was pro lol changing stuff on comps lmao, and I made it high gz and my computer was so currupted so slow, sometimes it wouldn't even boot properly, so I had to format it I couldn't even change it back it was so laggy.





BrokenX
 
K

kaiser_soze

Guest
ya i have counter-strike and downloaded a couple things to overclock my vid card, and I changed all settings to max, got my fps from 60 to over 100, it's pretty sweet!
maybe this screwed up my sc?
doubtful..if i can play 1v1 fine though
 
D

daz59

Guest
Did you ever find a fix for this? I have the same problem, can only play 1v1 and can only see messages from the game host.

Darren
 
D

daz59

Guest
I thought I would also ad.

It has something to do with the ADSL modem, I have 3 computers in the house tried all 3 with different combinations of LAN and USB so it has something to do with NAT i think.
 
P

PwnThePanda

Guest
Instead of posting 2 times.... Edit your old post and add on what you wanted to say.

P.S. Welcome to the Forums :)
 

Negafox

Friend of TheHelper.net
Reaction score
10
StarCraft was released before broadband, firewalls, and routers became commonplace in the household, so it lacks custom network settings. Try uninstalling Norton Internet Security and see if this resolves the issue.
 
D

daz59

Guest
I fixed the problem, turned NAT off in the modem and had my router assign ip address to my computers.
 
R

roise_r

Guest
your ADSL modem supports NAT? hm... this is something new for me... so at one point you had NAT enabled on the ADSL modem, and on the router connected to the ADSL modem? double-NAT :)
 
R

roise_r

Guest
Ups! well just didn't notice the date... i guess it didn't hurt anyone, eh! :)
 
J

jonny''

Guest
help meee

Hey guys.. I know this topic is a year old but i am having the same problem... Im not the best with computers and would love it if you could post a real simple way of getting rid of the problem, say it in real fine detail so i know how to do these things like turn 'NAT' off and all this .. . .

Cheers Jonny! plzzz help soon as possible!!!
 
M

mrmatt

Guest
I am glad to see this one resurrected. I have had this problem on and off for years. I believe it has something to do with NAT. Linksys, Netgear, SMC, Belkin all the "Home" routers have worked fine for me. It is only when I switch to a higher-end firewall that I have had problems. I tried running a smoothwall several years ago with no luck. It worked great for everything BUT StarCraft. I recently picked up a Netscreen 5xt and have the exact same problem I did with the Smoothwall.

- I can join B.net Fine
- I create serious lag wenever more than 1 person is in a game
- other ppl (except game host) show 2 green lag indicators before the game starts
- When game starts lag is unbearable and I get disconnected sometimes

Here are things I have tried:

- Disable all software firewalls / anti-virus
- Opened suggested 4000, 6112 and several other ranges (both directions)
- Deleted bncache file
- Reinstalled SC
- Reboot everthing

It really is isolated to the firewall. Some just don't seem to work well with b.net. Surely a Netscreen is better than a Linksys...

Anyone have a similar experience / find any solutions.

Thanks,

Matt
 
S

SimonPierre

Guest
Starcraft lag problem

I have the exact same problem, I tried all the same things but nothin worked.

My Setup: two computers hooked to a MOTOROLLA ROUTER hooked to an ADSL MODEM

We need help!!

Thanks, Simon
 
W

warhog_x

Guest
All,

as mrmatt described so accuratly the problem I won't repeat it, since it was exactly the same here (for years). I also tried:
- virtual server
- port triggering
- dmz + firewall off
- different computer(s) with different hardware
nothing changed the behavior.

One thing did:
changed the router from
ASUS WL500g deluxe, firmware 1.9.5.0
to
netgear RP614v3, firmware 6.0

and it finally worked. Since I am no HW nor SW expert, I can not explain the reason why, but I am finally able to play with more then one player...
 
B

blindbird

Guest
installing uPnP, then enabling it in the router worked for me.

tho i heard that plug and play isnt very safe.
 
V

Voh

Guest
mmm.. so i've had this problem since i got my new computer.. i've tried reinstalling sc, connecting the cable straight from my cable modem, enabling UPnP, and turning off all firewalls/programs. Currently I use a WRT54G wireless - G Broadband Router but as I said already, I've tried connecting it straight from my cable modem but still the same results.

my system specs are:
HP AMD Athlon 64x2 dual core processor 3800+
1 gb of ram
Radeon X 1600 Pro
Windows XP

if anyone has any other ideas i would be really thankful!
 
G

guillaume

Guest
Same problem here! I'm on a Siemens speed stream 6520. Starcraft was working properly before I got this router. I set up an ip static adress, and forwarded the ports 6112. Help?

Thanks
 
General chit-chat
Help Users
  • Varine Varine:
    They also were digging threw old shit at the sheriff's office and I tried to get them to give me the old electronic stuff, but they said no. They can't give it to people because they might use it to impersonate a cop or break into their network or some shit? idk but it was a shame to see them take a whole bunch of radios and shit to get shredded and landfilled
  • The Helper The Helper:
    whatever at least you are free
  • Monovertex Monovertex:
    How are you all? :D
    +1
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.

      The Helper Discord

      Staff online

      Members online

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top