Frost AE Grinding Guide

C

cpoief

Guest
By:Orin

I've been AE grinding with frost for the past 23 levels (since around level 24). Frost AE grinding allows you to consistently take on 8-12 mobs of your own level and lower. I'm only level 47, but I have had a hard time finding relevant posts on the details and nuances of frost AE grinding on this forum so I wanted to draft up the things I have learned. I prefer to solo most of the times, so the following guide is geared towards solo frost AE grinding.

In this post, I want to focus on:

the basics: pros and cons of frost AE grinding

the talent spec that worked for me

the process of frost AE hunting

equipment advice

some key AE hunting locations

misc information

The Pros:
Solo frost AE grinding (SFAEG) is the most entertaining play experience I’ve had. Nothing beats watching 8-12 even-level mobs drop down dead at the same time, except for maybe the look on other character’s faces when they see you do it. Once you understand the spawns at a particular location, you can grind continuously. Exp from AE grinding is far better than questing and far more exciting than solo grinding.

The Cons:
1) By going this spec, you will inevitably be sacrificing your single-target DPS to get the correct frost talents. You will need more mana than other mages to tackle single mobs, but no other build can handle the number of mobs you can at the same time.
2) At every given level, there are very few (usually only one) location where you can SFAEG. This is mainly because you need clusters of mobs where there are no casters or shooters.
3) There is a significant amount of risk involved. Expect to die often as you learn how to AE grind well.

Basic Advice:
Don’t try to SFAEG until at least around level 27-29. You won’t have the right talent combinations before then. I would recommend going fire at first and then switching to frost somewhere around level 32 (once you can get frost channeling).

The Talent Build:
Frost talents need to work in tandem with each other. This is why it makes most sense to switch once you have enough talent points, but not worth it to build up to it. The key frost talents in this build work to slow mobs down to a crawl while they take damage.

You always want 5 points in Improved Arcane Missiles for the single mobs. At level 32, this is the build you want:

5 Improved Arcane Missiles
5 Permafrost
2 Improved Frost Nova
3 Winter’s Chill
3 Improved Blizzard
1 Coldsnap
1 Piercing Ice
3 Frost Channeling

After level 32, you would add (in roughly this order):

+2 Piercing Ice (3 altogether now)
3 Improved Cone of Cold
1 Ice Block
5 Arcane Concentration

Since I am at level 47 now, I’m not sure yet what the best way to proceed is. I’m debating whether to get Improved Arcane Explosion now or later, or never. As you will see, IAE is not needed for SFAEG. I’m thinking that it’s more important to get Ice Barrier than to get IAE. That would save me mana and give me additional protection.

Don’t get Frostbite! It will ruin your AE pulls by randomly freezing mobs.

Process of SFAEG:
You need to know your location and spawns down cold to do this successfully. The paths of wandering patrols and the precise number of spawns must be understood. Also, you will need to know how far a mob will chase you before it runs away. You should SFAEG mobs that are between 1 level above you and three levels below you. And you need to make sure there are no casters or shooters in the camp, or that you have eliminated them before hand. Here is the basic procedure:

1) Cast Mana Shield.

2) Aggro as many mobs as you can. Pre-40, you need to do this on foot. Post-40, you do this on a mount. Having the mount significantly increases the number of mobs you can aggro at a time. Pre-40, you should aim for around 8 mobs. Post-40, you should aim for 10-12. You should aggro all mobs within a 50 yard area because you will need space to kill them.

3) Run the mobs in a small spiral to make them cluster together. Once they are close enough, cast Frost Nova. (We’ll handle exceptions below)

4) Cast Blink and then move an additional 3-5 steps away. You are now at the maximum distance at which you can cast Blizzard. Cast the 1st Blizzard with the outer edge on the mob cluster. You should hotkey Blizzard so you don’t waste time with moving the mouse back and forth.

5) When the 1st Blizzard is about to end, cast the 2nd Blizzard.

6) At the end of the 2nd Blizzard, the mobs will be very close to you (or have already started to hit you). Cast Cone of Cold while stepping back. Then cast Frost Nova right after.

7) Keep moving back a little. Now cast a final Blizzard. On most levels if you are using the level appropriate Blizzard, they will all die during this final Blizzard. On other levels, you may need to run up and do an additional Cone of Cold.

Exceptions:
1) Your Frost Nova is resisted by a mob during step 3 – If only one mob is resisted, you can use Coldsnap to recast Frost Nova. If this is not possible, you can often blink and cast the 1st Blizzard in time to slow that runaway mob. That runaway mob will hit you at the end of the 1st Blizzard. Cast Mana Shield, let the mob continue hitting you, and cast 2nd Blizzard on the rest of the mobs. Then proceed with step 6.
2) Runners – Most mobs are runners. You need make sure they don’t run away. Typically mobs will run away during the 3rd Blizzard or right after the Cone of Cold. In both cases, you should be able to kill them before they get outside of Blizzard.

Source: World of Warcraft Gold Free Guide
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1

      The Helper Discord

      Staff online

      Members online

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top