Looking for Terrainer

Saiza

New Member
Reaction score
10
Hello!

Lately, I've been creating a small AoS map for 3 players (4 at most). It is suppose to be a fast-paced battle between the noble Alliance and the brute Horde. At the moment I have the most systems (recipe system, killing spree system etc) and a total of 10 unique heroes. However, what the map is missing is some terrain. I have yet only made the scetch:
27903619.png


So, I am looking for someone who would like to make the terrain for my map (it's 64x64 with 52x52 playable). Any of the following tilsets will work just fine: Ashenvale, Felwood, Barrens, Village, Village Fall, Lordaeron Summer and Lordaeron Fall, however I'd prefer Felwood/Ashenvale/Barrens.

I'd like the top side to be designed for the horde (orcish environment) and the bottom side to be designed for the alliance (elvish/humanish environment). The paths are atm very straight, you can of course make these a little bit more winding. The important part is that they are about the same (for example not a road leading from the bottom lane to the middle and then back to the bottom lane). Each lane should have room for a tower, just about above the middle of them. In the bases I am going to place a fountain of health and some shops in the bottom corner for the bottom base and top corner for the top base, so make some room for that there, I am also going to place a Castle/Stronghold in the middle of both bases so make some room for that. At the start of each lane I'm going to place a barrack and a tower, so save some room for that :).

In the middle of the map I want some sneak roads connecting both lanes so you can run there to gank, I also want 5 creep camps, a secret shop and if you can find room for it, a spot for a small boss.

If want to help me and think you can do it, don't hesitate to tell me! :)
 

Attachments

  • Terrain.w3m
    14.5 KB · Views: 175

KillingSpree

New Member
Reaction score
7
I'm interested in the 'job'.
I am a decent terrainer, not so good, but not so bad either.

EDIT: Can you make a sort of map in paint, where you sketch the places you want to have the buildings?
It would be more helpfull to me than the description!
 

Saiza

New Member
Reaction score
10
I'm interested in the 'job'.
I am a decent terrainer, not so good, but not so bad either.

EDIT: Can you make a sort of map in paint, where you sketch the places you want to have the buildings?
It would be more helpfull to me than the description!

I updated the map with the position of the buildings :)
 

Avaleirra

Is back. Probably.
Reaction score
128
Here is my submission. Enjoy (hopefully) :p!

Avaleirra
 

Attachments

  • Terrain for Saiza.w3x
    59.5 KB · Views: 195

Avaleirra

Is back. Probably.
Reaction score
128
Is this for my terrain or kaboo's?



P.S. I think mine may require newgen.
 

Saiza

New Member
Reaction score
10
kaboo:
I really love the way you did the whole base, that's exactly how I wanted it to be. However, it feels like the creep camps nor the secret shop melts into the environment. I get the feeling that you made a forest and then just placed trees in circles to create the bases. Also, the Alliance road is a bit to straight for my taste (at least for that tile).

Avaleirra
The whole terrain is much better looking than I ever thought I could get someone to do for me so I will use this terrain without any doubt. Everything is perfect for my map. I really like the way you did the horde side use barrens tilset and the alliance side use lordaeron winter tilset.

+rep to both of you guys, and thanks alot :)

Edit: No, sorry Avaleirra, I didn't see your submission at first, that reply was for kaboo.
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1
  • The Helper The Helper:
    New recipe is another summer dessert Berry and Peach Cheesecake - https://www.thehelper.net/threads/recipe-berry-and-peach-cheesecake.194169/

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top