My spell will not work OMG:eek:

N

NindoOne

TH.net Regular
Reaction score
17
Greets!

This spell (called "Split Half") wont work as it is supposed to:(. The spell is supposed to make an illusion of the target and then do 50% of the targets health to both of them. Then if the illusion is killed, the target recives another 250 dmg. What it does ingame is :

1. Creates an illusion
2. sets the targets hp to ((Life of targets HP) / 2)
3. sets the illusions HP equal to the targets HP
4. it doesn't run the "Split half extra dmg" when illusion is killed

So in short words; the main thing work but when the illusion is killed nothing happends. Also, the illusion does not change owner -.-. I can't see the problem in here, please help me! :)

---- Triggers ---
Trigger:
  • Split Half sets
    • Events
      • Unit - A unit Starts the effect of an ability
    • Conditions
      • (Ability being cast) Equal to Split Half
    • Actions
      • -------- Sets --------
      • Set sh_caster = (Casting unit)
      • Set sh_target = (Target unit of ability being cast)
      • Unit Group - Pick every unit in (Units within 256.00 of (Position of sh_caster) matching (((Matching unit) is an illusion) Equal to True)) and do (Actions)
        • Loop - Actions
          • Set sh_fake = (Picked unit)
          • Unit - Change ownership of (Picked unit) to (Owner of sh_target) and Change color
      • Unit - Set life of sh_target to ((Life of sh_target) / 2.00)
      • Unit - Set life of sh_fake to (Life of sh_target)%


Trigger:
  • Split Half extra dmg
    • Events
      • Unit - A unit Dies
    • Conditions
      • (Triggering unit) Equal to sh_fake
    • Actions
      • Unit - Set life of sh_target to ((Life of sh_target) - 250.00)
 
kaboo

kaboo

New Member
Reaction score
45
so you cast the spell and an illusion of the target will be created at your position?
 
L

LightChaosma

New Member
Reaction score
60
where is the illusion created?

also there is a boolean comparison : is an illusion

what ability is it based of?

and 4th, i think teh "a unit is killd" event is not triggered by illusions, but im not sure
 
N

NindoOne

TH.net Regular
Reaction score
17
The spell is based on staff of illusion, so the illusion is created around the target. The range of the spell is melee.

LightChaosma said:
where is the illusion created?

also there is a boolean comparison : is an illusion

what ability is it based of?

and 4th, i think teh "a unit is killd" event is not triggered by illusions, but im not sure
Click to expand...

The boolean should be there, otherwhise i can't set "sh_fake" to the illusion
 
L

LightChaosma

New Member
Reaction score
60
you could a line like this in your 1st trigger:
Trigger:
  • Trigger - Add to (trigger 2) the event (Unit - (Picked unit)'s life becomes Less than or equal to 0.00)


why it doesnt change owner i dont know...
 
You must log in or register to reply here.
General chit-chat
Help Users
  • No one is chatting at the moment.
  • The Helper The Helper:
    Here is a cool dessert recipe I found https://www.thehelper.net/threads/recipe-cherry-cheesecake-brownie.194048/
  • The Helper The Helper:
    Found a cool easy Chicken Pot Pie recipe! https://www.thehelper.net/threads/recipe-chicken-pot-pie.194064/
  • Monovertex Monovertex:
    How are you all? :D
     +1
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
     +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
     +1
  • The Helper The Helper:
    Here is a great appetizer recipe Texas style! https://www.thehelper.net/threads/recipe-chicken-stuffed-poblano-peppers.194086/
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
     +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    New dessert for Summer - https://www.thehelper.net/threads/recipe-lemon-blueberry-layer-cheesecake.194113/
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
     +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though

      The Helper Discord

      Members online

      No members online now.
      Online now:
      106 (members: 0, guests: 106)

      Share this page

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top