upgrades can be made in the last tab of the object editor, titled 'upgrades'. Because you only want it so that you can make the tower, set its name and tool tips, make it only a 1 level upgrade and make sure it doesnt have anything set under any of the 'data - effect' stats.
Then once you have designed the upgrade you can add it to a buildings research in the unit editor. Select the building you want to research it from (the factory) and then add it to the stat 'techtree - researches available'.
Then to make it so your tower can not be made without the research open your tower in the unit editor and add the upgrade to 'techtree - requirements'.
do you have a Building where you can choose a race(or more) that is player owned? (red got one and blue, teal and all the otter players)?
you can do it like this.
1. open Object Editor->then under upgrades.
2. make the research: for exampel take iron plating and copy it.
set data-Effect 1: to none
set stats-levels: to 1
set stats-gold base: to (what research cost in gold)
set stats-lumber base: to (what research cost in Wood)
set stats-time base: to (the time to get the Research 30 is good ;D )
set text-name: to Ice Technogly
set text-tooltip: Get Ice Technogly
set text-tooltip-Extended: to get the Ice Technoglt let you build Ice towers.
Remember to Chance the Icons to somthing Ice'y ;D
now add the Research to the Race Chooser Building (hope you got one)
for that you need to do:
1. go under Units
2. pick your Race Chooser Building and add the Resceach under
Techtree-Rescearches Available:
then find you Ice tower(s) and go to:
Techtree-Requirements: and add the Resceach
Simple steps:
1) Make a research (they are located in "upgrades" category)
2) Go on your building that does the upgrades, and set "Researches Avalaible - "your new upgrade"
3) Go on your tower that requires that research, and in "Techtree - upgrades used" or "Techtree - Requiepments" add your new upgrade
i did that .... but it still is able to be built .. and .. after i upgrade .. the damage of the tower increased by 1 .. even though i set it to availability
Here, I've made the ice tower upgrade for you, you will see it down the bottom of the upgrades list under custom - human. You can change the name and the gold costs to what you want.
All you need to do is add this to the factories 'techtree - researches available' and to the towers 'techtree - requirements' in the unit editor.
Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
@tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart