Warcraft 3 Freezes periodically

Name_n

New Member
Reaction score
0
My game freezes periodically when I play online

is it my processor overheating? Because my internet connection is fine. The CPU Usage does go up to like 80-100%..
 

Slapshot136

Divide et impera
Reaction score
471
you should be able to check with a program like speedfan or occt - under 60º is generally good, but they aren't supposed to turn off until 100º (they might slow themselves down to prevent reaching that high tho), and also you should see if you hear the fan ramping up as it gets hot or not (unless the fan is always at 100%, but then you shouldn't be anywhere near those temps)
 

Name_n

New Member
Reaction score
0
this is a relatively new computer too, when i check speedfan, it says around 55, but i know it goes above when im actually playing the game.

is there any way to lower this? intel core i3 running on windows 7
 

Slapshot136

Divide et impera
Reaction score
471
that's pretty high for a i3 (those only draw 73 W), especially for an idle temp

can you increase the fan speed somewhere? does it actually spin? if that doesn't do much, I think you would need to get some thermal paste (it's fairly cheap) and re-seat the heatsink
 

Name_n

New Member
Reaction score
0
that's pretty high for a i3 (those only draw 73 W), especially for an idle temp

can you increase the fan speed somewhere? does it actually spin? if that doesn't do much, I think you would need to get some thermal paste (it's fairly cheap) and re-seat the heatsink

whoa, i'm not too familiar with these terms xD

so i should get some thermal paste and re-seat the heatsink, i need to get these defined.

yea, i'll try to get the fan speed up and i can hear the fan spinning
 

Slapshot136

Divide et impera
Reaction score
471
i can hear the fan spinning

there are multiple fans inside your computer - are you sure it's the CPU fan that's spinning? and speedfan/etc. isn't great at determining which fan is which, it depends on the wiring

a heatsink is a block of metal (usually copper) that dissipates heat from your CPU (usually with fins to maximize surface area, and with a fan blowing on it)

thermal paste is a paste that is applied to the cpu and/or the heatsink to maximize the heat transfer between the two - this can age/etc. and is a common problem in older computers
 

Name_n

New Member
Reaction score
0
there are multiple fans inside your computer - are you sure it's the CPU fan that's spinning? and speedfan/etc. isn't great at determining which fan is which, it depends on the wiring

a heatsink is a block of metal (usually copper) that dissipates heat from your CPU (usually with fins to maximize surface area, and with a fan blowing on it)

thermal paste is a paste that is applied to the cpu and/or the heatsink to maximize the heat transfer between the two - this can age/etc. and is a common problem in older computers


Is there an way to check without disassembling? I just got this computer like 3 days ago

EDIT: OH, it said at one point, it actually minimized warcraft 3 and told me something about graphics drivers stopped working. my driver is out of date, how the hell do i update it? that goddamn device manager keeps giving me the "Your driver is up to date" crap.
 

Slapshot136

Divide et impera
Reaction score
471
if this is new, im going to guess that it's vista or win7 - in that case, go to "computer" then "system properties" then "windows experience index" then "view and print results" (it won't print them yet) and look for "Display adapter type" - if this is a nvidia card, go look for drivers @ nvidia's site, if it's ATI then same thing but go to ATI's site

you could also try running windows update (type in "windows update" in the start menu), but the above method is generally better

60º as an idle temp for a fairly low-wattage (73W) CPU is still abnormally high tho
 

Name_n

New Member
Reaction score
0
if this is new, im going to guess that it's vista or win7 - in that case, go to "computer" then "system properties" then "windows experience index" then "view and print results" (it won't print them yet) and look for "Display adapter type" - if this is a nvidia card, go look for drivers @ nvidia's site, if it's ATI then same thing but go to ATI's site

you could also try running windows update (type in "windows update" in the start menu), but the above method is generally better

60º as an idle temp for a fairly low-wattage (73W) CPU is still abnormally high tho

Yes, it doesn't freeze anymore! I got my drivers updated. Apparentl they were out of date. THank you for the help!
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1
  • The Helper The Helper:
    New recipe is another summer dessert Berry and Peach Cheesecake - https://www.thehelper.net/threads/recipe-berry-and-peach-cheesecake.194169/

      The Helper Discord

      Members online

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top