Escape Help

darkRae

Ueki Fan (Ueki is watching you)
Reaction score
173
You should try making it 1.00
Or have a trigger that makes the unit face the angle to (target point of issued order) in (angle/90)
 

darkRae

Ueki Fan (Ueki is watching you)
Reaction score
173
No, change the turn rate to 1.00
You can try changing the Periodic Event rate too. Just experiment with things, you'll find out which is best :D
 

Kill3rbeast

New Member
Reaction score
0
Hm, sorry i wasn't online the last days...

You are right in my trigger is a bit confusing and also a bit leaky. But AoW_Hun7312 slide trigger is leaky, too. Worked over my trigger and found out to really avoid leak you need to set the Slide Players in other trigger (SlideUnits). Then you dont take unit group (All units were put into a group and then once for once used, that takes performance...). Take "for each inteager A from 1-10 (if you have 10 Players). Then make triggers like:

Code:
For each (Integer A) from 1 to 10, do (Actions)
    Schleifen - Aktionen
         If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            'IF'-Bedingungen
                ((Player((Integer A))) controller) Gleich Benutzer
                ((Player((Integer A))) slot status) Gleich Spielt
            'THEN'-Aktionen
                Set SlideFacing[(Integer A)] = (Facing of SlideUnits[(Integer A)])
                Set temp_point = (Position of SlideUnits[(Integer A)])
                If (All Conditions are True) then do (Then Actions) else do (Else Actions)
                    'IF'-Bedingungen
                        (Terrain type at temp_point) Gleich Northrend - Eis
                        (SlideUnits[(Integer A)] is alive) Gleich True
                    'THEN'-Aktionen
                        Set temp_point2 = (temp_point offset by 7.00 towards SlideFacing[(Integer A)] degrees)
                        Einheit - Move SlideUnits[(Integer A)] instantly to temp_point2
                        Set HeroSlideEffect[1] = (Position of SlideUnits[(Integer A)])
                        Spezialeffekt - Create a special effect at HeroSlideEffect[1] using Abilities\Weapons\ZigguratMissile\ZigguratMissile.mdl
                        Spezialeffekt - Destroy (Last created special effect)
                        Custom script:   call RemoveLocation (udg_HeroSlideEffect[1])
                        Custom script:   call RemoveLocation(udg_temp_point)
                        Custom script:   call RemoveLocation(udg_temp_point2)
                    'ELSE'-Aktionen
                        Custom script:   call RemoveLocation(udg_temp_point)
            'ELSE'-Aktionen

Tanks to dhk_undead_lord to help me create this leakfree slide trigger...
 

darkRae

Ueki Fan (Ueki is watching you)
Reaction score
173
Dude, the problem is solved.
And why would you need to use Loops?
Using a Unit Group is easier.
Just add/remove when you want to.
 

BloodReaver

New Member
Reaction score
2
Ugh! Ok I just need a stinking slide trigger. Can someone make me a map with triggers:
-Slide
-Slide (uncontroll)
-death on snow touch

I am trying not to sound greedy but anyway it would be nice to learn this trigger, but I can't. I'll work on making my own later but now I really wanna make the map. I am on vacation from school for a week so I want to strat it and not spend 9 hours on one trigger!!!
 

darkRae

Ueki Fan (Ueki is watching you)
Reaction score
173
Errr..... what about my previous triggers? Which is in the map NotBlah?
 

BloodReaver

New Member
Reaction score
2
Well yours are good but I also need some that turn which is impossible for me to get. I have tried changing triggers, changing periodic event, changing turn rate and I still cant get it and now the death trigger doesn't work!
 

darkRae

Ueki Fan (Ueki is watching you)
Reaction score
173
Check if the unit (which is going to be moved) is standing on a Snow Tile. Then kill him.
 

R@i_no_Wyrm

New Member
Reaction score
43
what exactly you want? a controlled sliding? Take ice from icecrown glacier and northend to do well with the trigger...
 

BloodReaver

New Member
Reaction score
2
Well I would like:
-Ice where you can move on (have that)
-Die when you touch snow (have that)
-Move around on ice like in so many maps. Like Polar Escape, Escape Builder, Slide Ninja Slide. (NEED THAT)

So if you can help me make a smooth controllable ice I would like that!
 

darkRae

Ueki Fan (Ueki is watching you)
Reaction score
173
Oh, lemme guess. You cannot turn your unit while sliding?
Try increasing the Periodic Event interval.
 

BloodReaver

New Member
Reaction score
2
No I can I was able to do something by myself. The problem is I need to double click my destination every 3 or 4 times. And it still isn't as smooth as Polar Escape sliding (which is how I want my sliding)
 

darkRae

Ueki Fan (Ueki is watching you)
Reaction score
173
Yup, that's the problem.
Try increasing the Periodic Event interval (not reduce :p sorry)
 

BloodReaver

New Member
Reaction score
2
When I increased it, it only resulted in bits at a time. Instead of smooth it would move an inch, wait. Move another inch, wait. And in continues! I would really like it to be smooth.
 

darkRae

Ueki Fan (Ueki is watching you)
Reaction score
173
Try forcing the unit to face the angle to the target point of issued order.
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top