Is there integrated graphics card on this rig?

Samael88

Evil always finds a way
Reaction score
181
Hi,

I am helping my sister to pick out a computer for her to buy, and I stumbled onto this thing:

# 483001 - Cooler Master Sileo 500, 500W PSU Svart, Fläktar: 1x 120mm Front, 1x 120mm Bak, ljudabsorberande, 500W PSU
# 576803 - Intel Core™ i3 Dual-core Processor i3-540, 3,06GHz, Socket LGA1156, 4MB, Boxed
# 352064 - Kingston ValueR. DDR3 1333MHz 2GB, CL9 Non-ECC, 1.5V, 256Meg x 64, 240pin
# 576879 - Gigabyte GA-H55M-UD2H, H55, Socket-1156, 4xDDR3, m-ATX, GbLAN, VGA, HDMI, DVI, DisplayPort, PCI-Ex(2.0)x16
# 430708 - Seagate Barracuda 7200.12 500GB SATA-300, 16MB, 7200RPM
# 303162 - Antistatic Armchain 180cm

Now I am not really sure if it is just to put it together and run it.
I know that every part is there but I can't find anything that tells me that there is an integrated graphics card for that motherboard.
So my questions are is it a good rig?
Do I have to find here a graphics card to make it work?
 
The Core i3 series chips have graphics built directly into the CPU. So you could get a discrete card to improve graphics performance, but that should work fine how it is.
 
I suspected that with it having a GPU incorporated into the design^^
Thank you very much for you reply Ghan :)
Perhaps I should write how well it worked here later because it is so new:D
 
Definitely. I'm interested to hear how well the new chips perform with graphics as compared with older integrated graphics and discrete cards.
 
Then I will post it in a separate thread :) I can try warcraft 3 on it just for fun^^
I hope that it works with windows XP though, since I don't have windows 7 and only vista 64bits :)
 
I understood the integrated graphics only works on the h series motherboards, not the p series... yours should have it and work fine

mobo.png


I see a VGA and a DVI out on that motherboard.. so it looks good
 
Yeah, I noticed that as well, but the page did not say anything about an integrated graphics card so I was a bit confused there^^

It is a good thing that we have TH to help with these kind of things:thup:
 
Antistatic Armchain 180cm
Touch the metal area of case before starting assemble the pc then the static charges will gone. :)
 
I understood the integrated graphics only works on the h series motherboards, not the p series... yours should have it and work fine
Well, anyway. You should avoid anything that has an integrated parts video card graphics and so on.
If you want to buy a good comp.
 
Antistatic Armchain 180cm
Touch the metal area of case before starting assemble the pc then the static charges will gone. :)

I knew that^^ I actually used the ESD armchain for the first time in my whole life^^

Anyhow, I have assembled the comp now, it took me about 5 hours which is not that bad considering that I was so nervous that I was sweating like a pig and had to stop every half hour just so that I would not drip sweat on the motherboard:p

It is just crazy how different it looks considering the last comp I put together was about 5 years ago:eek:
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • V-SNES V-SNES:
    Happy Friday!
    +1
  • The Helper The Helper:
    News portal has been retired. Main page of site goes to Headline News forum now
  • The Helper The Helper:
    I am working on getting access to the old news portal under a different URL for those that would rather use that for news before we get a different news view.
  • Ghan Ghan:
    Easily done
    +1
  • The Helper The Helper:
    https://www.thehelper.net/pages/news/ is a link to the old news portal - i will integrate it into the interface somewhere when i figure it out
  • Ghan Ghan:
    Need to try something
  • Ghan Ghan:
    Hopefully this won't cause problems.
  • Ghan Ghan:
    Hmm
  • Ghan Ghan:
    I have converted the Headline News forum to an Article type forum. It will now show the top 20 threads with more detail of each thread.
  • Ghan Ghan:
    See how we like that.
  • The Helper The Helper:
    I do not see a way to go past the 1st page of posts on the forum though
  • The Helper The Helper:
    It is OK though for the main page to open up on the forum in the view it was before. As long as the portal has its own URL so it can be viewed that way I do want to try it as a regular forum view for a while
  • Ghan Ghan:
    Yeah I'm not sure what the deal is with the pagination.
  • Ghan Ghan:
    It SHOULD be there so I think it might just be an artifact of having an older style.
  • Ghan Ghan:
    I switched it to a "Standard" article forum. This will show the thread list like normal, but the threads themselves will have the first post set up above the rest of the "comments"
  • The Helper The Helper:
    I don't really get that article forum but I think it is because I have never really seen it used on a multi post thread
  • Ghan Ghan:
    RpNation makes more use of it right now as an example: https://www.rpnation.com/news/
  • The Helper The Helper:
  • The Helper The Helper:
    What do you think Tom?
  • tom_mai78101 tom_mai78101:
    I will have to get used to this.
  • tom_mai78101 tom_mai78101:
    The latest news feed looks good

      The Helper Discord

      Staff online

      Members online

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top