Attack from front

The newbie

New Member
Reaction score
0
I know that this probably is explained somewhere, but I couldn't seem to find it. Instead of a "backstab", I need a "fronstab" like GOUGE from WoW (which can only be cast when the enemy is facing you.

I need it to only be cast if the target is facing you (say 180*) (and ofc not cast if the target is not).

Thanks in advance (will give rep)
 

Dinowc

don't expect anything, prepare for everything
Reaction score
223
I really had problems making a backstab (never thought that it's so hard)

you could try this way:

Trigger:
  • trigger
    • events
      • unit - unit starts the effect of an ability
    • conditions
      • ability being cast equal to Gouge
    • actions
      • set target = target unit of ability being cast
      • set pos = position of target
      • set offset = pos offset by 150 towards facing of target degrees
      • set stab_group = units within 150 of offset matching (matching unit equal to triggering unit)
      • if then else
        • if number of units in stab_group equal to 1
          • then
            • unit - cause triggering unit to damage target...
      • call RemoveLocation(udg_pos)
      • call RemoveLocation(udg_offset)
      • call DestroyGroup(udg_stab_group)


ofc there are better ways but my head is empty now and can't think of anything else

EDIT: ups I made a mistake there, fixed now
 

Kikac_NNGK

Well-Known Member
Reaction score
33
try this
Code:
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
    If - Conditions
        Or - Any (Conditions) are true
            Conditions
                (Angle from (Position of (Triggering unit)) to (Position of (Target unit of ability being cast))) Greater than or equal to 330.00
                (Angle from (Position of (Triggering unit)) to (Position of (Target unit of ability being cast))) Less than or equal to 30.00
    Then - Actions
        *Your Actions Here*
    Else - Actions
 

Dinowc

don't expect anything, prepare for everything
Reaction score
223
Thanks, almost done, I don't need to remove "target"?

well you could "null" him by setting target = no unit

@Kikac_NNGK your trigger leaks and are you sure it will work?
 

Azlier

Old World Ghost
Reaction score
461
>i made my backstab on my map like that and it works fine

Experiment with that. Thoroughly. You will find that it doesn't work at all angles, most notably due east.
 

Kikac_NNGK

Well-Known Member
Reaction score
33
well he tryed to be infront of the unit. Isnt that the angle?
If its from any angle u dont need angles then
 

Azlier

Old World Ghost
Reaction score
461
Well, I was talking about the trigger you posted.

Trigger:
  • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
    • If - Conditions
      • Or - Any (Conditions) are true
        • Conditions
          • (Angle from (Position of (Triggering unit)) to (Position of (Target unit of ability being cast))) Greater than or equal to 30.00
          • (Angle from (Position of (Triggering unit)) to (Position of (Target unit of ability being cast))) Less than or equal to 30.00
    • Then - Actions
      • *Your Actions Here*
    • Else - Actions
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top