AnthraxXx
New Member
- Reaction score
- 25
Hi, I'm thinking about buying a new case for my PC, if I took a photo of my current component layout, and set it up exactly as it was in my new case - would it work fine? I mean is there anything I have to do within the system itself before transferring my components.
Cus Im just wondering if when I boot it with the new case it will come up with error messages etc. Im guessing no, but I want to be sure just incase.
Here are the specs for the cases:
My Current Case
X-Sonic 6918-F
Model: 6918F BLACK & SILVER
Power Supply: 460W
Drive Bay: 3.5" x 2
Drive Bay (Internal): 3.5" x 4
USB 2: Yes, 2 external port
Firewire: No
Fans: 2 x 120 mm Front/ Rear/ 1 x 80 mm Side Fans
Fan Slots: 3
Audio/MIC: 1 external port
PCI Slots: 7 (Tool Less)
Material: 1.2 mm Aluminium
PSU SATA Connection: Yes
PSU PCI Express Connection: Yes
PSU Main Power: 20pin + 4 pin convertible connector
Dimension (WxHxD): 240 mm X 515 mm X 540 mm
Weight: 7.0 kg
Wanted Case
iCUTE S-901 BLACK
Case Model: S901-Series
Case Type: Middle Tower Case
Dimension: 205 x 440 x 430 mm (W x D x H)
Meterial: 0.6 mm SECC
Motherboards: ATX/Micro ATX
Drive Bays: External 9 x 5.25" 2 x 3.5" Conversion 4 x 5.25' to 3.5"
Side I/O: USB*4 + AUDIO
FAN: Front (Intake) - 12cm*1 (optional) Real (Exhaust) - 8cm*2/12cm*1 (optional) Side (Intake) - Metal Side Panel + 12cm Air Duct for 4G; Acrylic Side Panel + 12 cm Air Duct + 12 cm Blue LED fan fro 4GA; Metal Side Panel + 25 cm fan for 5G1 Features 9 PCS metal mesh bay cover Blue power LED 4 sets 5.25 to 3.5 adapter + 12 cm fan bracker in the front 12cm/8cm
Technical design air duct for CPU cooling Metal mesh front panel for excellent ventilation Excellent VGA (SLI system) Cooling High performance and low noise level Extra large thumb screws for easy open side panel.
My Components
CPU: E6550
VGA: Inno3D 8600GT 512MB
MOBO: Gigabyte G33-DS3R
RAM: 2GB DDR2 667Mhz
HDD: Samsung 250GB SP2504C
PSU: 450W ATX
Optical: I forget, think its a Pioneer SATA II 16-18x DVD-RAM
All of the above fit into my current case (Obviously).
So if I transferred all my components to the wanted case, cable by cable exactly as it was before - my computer should run as it did before, if not better because of the cooling, right? No setup changes needed?
Cus Im just wondering if when I boot it with the new case it will come up with error messages etc. Im guessing no, but I want to be sure just incase.
Here are the specs for the cases:
My Current Case
X-Sonic 6918-F
Model: 6918F BLACK & SILVER
Power Supply: 460W
Drive Bay: 3.5" x 2
Drive Bay (Internal): 3.5" x 4
USB 2: Yes, 2 external port
Firewire: No
Fans: 2 x 120 mm Front/ Rear/ 1 x 80 mm Side Fans
Fan Slots: 3
Audio/MIC: 1 external port
PCI Slots: 7 (Tool Less)
Material: 1.2 mm Aluminium
PSU SATA Connection: Yes
PSU PCI Express Connection: Yes
PSU Main Power: 20pin + 4 pin convertible connector
Dimension (WxHxD): 240 mm X 515 mm X 540 mm
Weight: 7.0 kg
Wanted Case
iCUTE S-901 BLACK
Case Model: S901-Series
Case Type: Middle Tower Case
Dimension: 205 x 440 x 430 mm (W x D x H)
Meterial: 0.6 mm SECC
Motherboards: ATX/Micro ATX
Drive Bays: External 9 x 5.25" 2 x 3.5" Conversion 4 x 5.25' to 3.5"
Side I/O: USB*4 + AUDIO
FAN: Front (Intake) - 12cm*1 (optional) Real (Exhaust) - 8cm*2/12cm*1 (optional) Side (Intake) - Metal Side Panel + 12cm Air Duct for 4G; Acrylic Side Panel + 12 cm Air Duct + 12 cm Blue LED fan fro 4GA; Metal Side Panel + 25 cm fan for 5G1 Features 9 PCS metal mesh bay cover Blue power LED 4 sets 5.25 to 3.5 adapter + 12 cm fan bracker in the front 12cm/8cm
Technical design air duct for CPU cooling Metal mesh front panel for excellent ventilation Excellent VGA (SLI system) Cooling High performance and low noise level Extra large thumb screws for easy open side panel.
My Components
CPU: E6550
VGA: Inno3D 8600GT 512MB
MOBO: Gigabyte G33-DS3R
RAM: 2GB DDR2 667Mhz
HDD: Samsung 250GB SP2504C
PSU: 450W ATX
Optical: I forget, think its a Pioneer SATA II 16-18x DVD-RAM
All of the above fit into my current case (Obviously).
So if I transferred all my components to the wanted case, cable by cable exactly as it was before - my computer should run as it did before, if not better because of the cooling, right? No setup changes needed?