Computer is dying?

Pineapple

Just Smile.
Reaction score
576
Ok, so my computer is really messed up. i turn it onn and it makes the normal noise then it turns into a long buzzing sound then goes back to the noise after. But here is the kicker, the monitor is blank. It acts the same as it does when the computer is turned off and the monitor is on. It has a blank screen and the light flashes on and off. I have checked all the cords and they are all plugged it. We even changed the monitor and it still did not work.

Help. :( This computer hass my my photoshop picture, warcraft maps, writings, etc...
 

Miz

Administrator
Reaction score
424
Well when your computer makes a weird sound from its Hard Drive it usually means its crying for help or Yelling or whatever you want it to be called

Anyway did you do anything before you shut off your computer...

Many Ideas

  1. Video Card
  2. The Cord that you are using isn't sending a output
  3. You may have just put the output cord in the wrong slot
 

enouwee

Non ex transverso sed deorsum
Reaction score
240
Ok, so my computer is really messed up. i turn it onn and it makes the normal noise then it turns into a long buzzing sound then goes back to the noise after. But here is the kicker, the monitor is blank. It acts the same as it does when the computer is turned off and the monitor is on. It has a blank screen and the light flashes on and off. I have checked all the cords and they are all plugged it. We even changed the monitor and it still did not work.
Which light? On the screen?

Depending on the BIOS manufacturer, a continuous long beep is either a video/memory problem or "it's dead Jim", aka. the mainboard.
The "easy" solution to pinpoint the cause is to remove every extension card you have inserted, unplug all drives and external cables, remove all but one RAM module. If you feel adventurous, you can remove the mainboard and clean/re-seat the CPU. This will hopefully eliminate any shorts on the mainboard too.

If you have one, get a different power supply to do the testing.

Try booting after each of the following steps and listen to BIOS beep codes / read the diagnostic messages once you have a picture:
  1. different beep? add video card. same beep? change RAM. Still same beep? mainboard/CPU is dead
  2. add video card, so you can see what happens. If it works, add RAM
  3. add the extension cards one by one
  4. add the non-HDD drives (hard disks last, they don't like repeated spin-up/spin-downs)
  5. add all HDD
If this gets it working again, some cable was dislocated.

Help. :( This computer hass my my photoshop picture, warcraft maps, writings, etc...
Connect the disk(s) to another computer and copy the data.
 

Demi666

New Member
Reaction score
127
my comp has been starting to crash everytime i choose "Exit Program" after testing a map from WE :S same happends here
 

chris

New Member
Reaction score
17
Best bets to get a tech to run a diagnostics on the system....they willl be able to plug a pci card into the system to run these and it will lower down the amount of possibles causes
 

Pineapple

Just Smile.
Reaction score
576
Well, My mothrboard was fried. Luckly I managed to get a hold of anotherr for free. along with a better power suply ;) But, i can't use my hard drive and a CD/DVD drive at the same time, kind of point less. :( So i got a new hard drive from eBay, yay eBay! And with it i can hook up tw0o cd drives. But it gets better, my video card allows me to hook up 2 monitors, guess what I'm doing. ;)

Thanks for the help it helped me get it all narrowed down and solve this probelm. :)
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1
  • The Helper The Helper:
    New recipe is another summer dessert Berry and Peach Cheesecake - https://www.thehelper.net/threads/recipe-berry-and-peach-cheesecake.194169/

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top