Connecting two computers

Reaction score
149
Not really easy question, or is it?

If I wanted to connect two computers, but the only way is:

Connecting one computer via bluetooth to a cell phone
Connecting cell phone to the other computer via USB cable.

Now, is it possible to connect two computers using this hybrid connection?
 

enouwee

Non ex transverso sed deorsum
Reaction score
240
That could work, if one phone acts as dial-in server and the other does the call.
But it's going to be very slow and very expensive. Are you sure you want to do that? :p
 
Reaction score
149
No, you didnt get the idea. It's much easier for me to use bluetooth phone as a modem for it is like 1ct/MB

What I've meant is to connect devices as in:
Code:
 ______    cell-phone->   _|  Computer ->   ____             
|Laptop| (Bluetooth)     | |               |    |
|___ __| ))) ))) ))) ))) |_| (USB cable)   |    |        |Internet|
                              \___________/[____|\_______/

It's more like "Is it possible to do" question, as I know it's not practical at all ;)
 

juty

Zoom out problems look smaller
Reaction score
26
It might be possible but do u want to go on the net with it? Because I used 30 dollars of credit connecting my phone to my pc via bluetooth for 20 minutes note I was using the net
 

enouwee

Non ex transverso sed deorsum
Reaction score
240
What I've meant is to connect devices as in:
Code:
 ______    cell-phone->   _|  Computer ->   ____             
|Laptop| (Bluetooth)     | |               |    |
|___ __| ))) ))) ))) ))) |_| (USB cable)   |    |        |Internet|
                              \___________/[____|\_______/

I doubt a cellphone can be misused as USB-to-Bluetooth bridge. It'll listen at most to one PC, but not at both.

Why don't you interconnect both PCs using a USB cable?
 
Reaction score
149
Connecting two PC's via USB would fry the motherboard :)

I just used my LAN cable, althrough it's not very handy for a laptop as each doors I pass usually end up slicing my cable. Anyway, I still can't connect to the internet as the port 192.168.0.1 doesn't work on host computer when connecting laptop to it, and on laptop internet settings I can't set it to connect to internet via other IP, it gives me "Port mapping Failed" error to which I haven't found solution yet.
 

enouwee

Non ex transverso sed deorsum
Reaction score
240
Connecting two PC's via USB would fry the motherboard :)

A-A cables may only be used to connect peripherals, not computers. But as you'd have to buy a USB cable anyways, just purchase a "bridge" one. Or use Firewire if available, it doesn't require such gadgets.

I just used my LAN cable, althrough it's not very handy for a laptop as each doors I pass usually end up slicing my cable.
:confused:

Anyway, I still can't connect to the internet as the port 192.168.0.1 doesn't work on host computer when connecting laptop to it, and on laptop internet settings I can't set it to connect to internet via other IP, it gives me "Port mapping Failed" error to which I haven't found solution yet.

If you've got a router, connect both PCs to it and you're done. The hard way is to configure the PC as gateway and make the notebook connect to the internet through it. Requires two network cards inside your PC, ICS (if you're on XP or 3rd party NAT software) as well as some serious networking knowledge.
 
Reaction score
149
"I just used my LAN cable, althrough it's not very handy for a laptop as each doors I pass usually end up slicing my cable."

I like to go outside to balcony, to kitchen and various other places with laptop. And usually someone decides to close the doors right before noticing that there is a cable in the doorway ;)

I've got a Cable connection to internet, I've got 2 LAN Cards, and I've already connected both computers. Yet, HTTP server (port 80) seems to no way accept the first computer as the host, and my non static IP is automatically assigned by my ISP.

And I don't have "some serious networking knowledge." :p

That's why I'm asking for help here ;)
 

enouwee

Non ex transverso sed deorsum
Reaction score
240
I like to go outside to balcony, to kitchen and various other places with laptop. And usually someone decides to close the doors right before noticing that there is a cable in the doorway ;)
That's why "they" invented wireless networking. Apparently it's "great". One day I'm going to configure one to annoy the neighbours. :p

I've got a Cable connection to internet, I've got 2 LAN Cards, and I've already connected both computers.

So, you've got (replace by your own IPs/netmasks):
Code:
  [B]Notebook[/B]    --------->       [B]PC[/B]       --------->    [B]Internet[/B]
(10.0.0.2/24)     (10.0.0.1/24)  (public IP)

You've got two solutions. Either install/configure the following on your PC:
  • address translation: the easiest way is probably the ICS, that comes with XP. While the PC acts as gateway for your notebook, the notebook uses the following configuration:
    • IP: 10.0.0.2
    • Netmask: 255.255.255.0
    • Gateway: 10.0.0.1
    • DNS: the one from your ISP or 10.0.0.1 if ICS provides relaying
  • a proxy, be it SOCKS or HTTP. You won't be able to play games, but it's more than enough to surf. On the notebook, you'd set 10.0.0.1 as proxy in your browser.
 
Reaction score
149
Actually, I've set it all up like

First Computer:

LAN 1 (Internet)
Automatic

LAN 2

IP: 192.168.0.200
Netmask: 255.255.255.0
Gateway: Empty
DNS: Empty

Laptop:

IP: 192.168.0.199
Netmask: 255.255.255.0
Gateway: 192.168.0.200
DNS: Empty

The oddity in here is that computers share data perfectly, and laptop even got Internet Gateway up (sort of):
internetla2.jpg



Still, internet doesn't work, the only thing that it let's through is Torrent.

Yet, on "Settings" it does not let me to set host for the internet connection on this network to be computer with IP:192.168.0.200 , just throws out "Configuration of port mapping failed" and unchecks the internet connection.

And, if I try to assign 192.168.0.1 IP adress to the first computer and 192.168.0.2 IP adress with 192.168.0.1 Mask to the Laptop, I get "Limtied or no connectivity" problem.
 

enouwee

Non ex transverso sed deorsum
Reaction score
240
Laptop:

IP: 192.168.0.199
Netmask: 255.255.255.0
Gateway: 192.168.0.200
DNS: Empty

Not good. What's the output of nslookup www.google.com ? Should you not get an answer (compare the output of your PC and notebook), you have to fill in the official DNS servers of your ISP, or try 192.168.0.199 (assuming ICS has a DNS relay feature, as mentioned above).

Other possible cause: the personal firewall on your PC prevents the notebook from accesing the internet.
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1

      The Helper Discord

      Staff online

      Members online

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top