Fatal Error During Runtime

Tyrulan

Ultra Cool Member
Reaction score
37
Hey guys, somewhat new to Jass so I hope you can be as helpful as possible while still being polite. Here is my code:

JASS:

function goFish takes unit castingUnit returns integer
    local integer int = 0
    local integer counter = 1
    local integer abilityDuration = 15 - 1
    local integer catchChance = 20 - (GetUnitAbilityLevel (castingUnit, 'A001') * 5)
    loop
        exitwhen counter > abilityDuration
        call TriggerSleepAction(1.00)
        set int = GetRandomInt (0, catchChance)           
        if (isCaughtFish(int) ) then
            call floatText ("You Caught A Fish!!", castingUnit, 0.00, 150.00, 0.00)
            return counter
        endif
        set counter = counter + 1
    endloop
    return 0
endfunction

function Trig_Fish_Get_Actions takes nothing returns nothing    
    local unit castingUnit = udg_Caster
    local integer counter = goFish(castingUnit)
    if (counter  == 00) then
        call floatText ( "No Fish Were Caught", castingUnit, 150.00, 0.00, 0.00 )      
    endif
    call TriggerSleepAction(0.50)
    call floatText ( "Loops: " + I2S(counter), castingUnit, 100.00, 100.00, 0.00 )      
endfunction


It works the first run through, but if the fish is caught before the abilityDuration (15 seconds) and the spell is recasted - the game crashes into fatal error. I'm assuming it is because I need to clear variables but I could be wrong. How would I clear the local variables here?

Thanks in advance.
 

jig7c

Stop reading me...-statement
Reaction score
123
set castingUnit = null

im also new to JASS, so i could be wrong...
 

Tyrulan

Ultra Cool Member
Reaction score
37
Thanks for the quick reply, I have just done that in my code before you mentioned it. :) Is it possible to do the same for the integer variables as well? Are they not still taking up memory?

This however has not fixed the error. :( Any suggestions?
 

jig7c

Stop reading me...-statement
Reaction score
123
i think when you recast the spell, the abilityDuration is not being reset to 15 again...
 

GameOver[GR]

New Member
Reaction score
11
I think that you should check this :

JASS:
local integer catchChance = 20 - (GetUnitAbilityLevel (castingUnit, 'A001') * 5)


if the chance can be negative then this may crash the game

Everything else seems find :banghead:
JASS:
local integer catchChance = 20 - 5 * 5)

That means 20 - 25 whitch means the chance is -5
If the level of the ability are not higher than 4 then this i told you is probably wrong.
 

Midna

New Member
Reaction score
1
i tested this and it worked. Thanks mate :thup: , if you still have this problem then it should be somewhere else.
 

Tyrulan

Ultra Cool Member
Reaction score
37
I'm fairly certain that the game is not crashing on the catchChance line as when I test it the spell is only level 1. Therefore 20 - 5 = 15.

And Midna I'm confused by your post. What do you mean?

Also how would I remove leaks? Since I posted this I have set unit variables to null but this doesn't fix the problem.

The only thing I can think of is the loop is still running even after it hits the return counter when you catch a fish. I could add a 15/10/5 second cooldown on the spell but that defeats the purpose.
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Monovertex Monovertex:
    How are you all? :D
    +1
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top