Finding % of real - % math xD

R 3 T R O

New Member
Reaction score
12
I've got this
JASS:
    set udg_FZReal = GetRandomReal(2600.00, 3700.00)


Now, i need to find out the % of it

for example lets say it randomed FZReal=2600, then that would be "100% of clouds are in the air" and if FZReal=3700 it would be "0% of clouds are in the air"

See where im going? so basically the higher the number of FZReal the lower the % number should be, and the lower the FZReal is the higher the % should be.

I'm going to need to display the % number to the players

NOTE: I do know how to find the % of a number but the way im doing it is 2600 / 3700 * 100 = % but this will give me a high % number when the FZReal is low
 

DrEvil

FCRI Associate!
Reaction score
111
( value - minValue ) / difference in amount = decimal
above * 100 = percent

3700 - 2600 = 1100
half = 550
2600 + half = 3150

3150 - 2600 (min value) = 550
550 / 1100 (difference) = 0.5
0.5*100 = 50 %

another example:

3000 - 2600 = 400
400 / 1100 = 0.3636(recur)
0.3636(recur)*100 = 36.4%
 

BAkil

New Member
Reaction score
9
Here's something simple, hope it works.

I have another significantly easier method of doing the same thing:
(3700 - FZReal)/1100

Lets do some examples:
FZReal = 3700
(3700 - 3700)/1100 = 0/1100 = 0.0 or 0%
FZReal = 2600
(3700 - 2600)/1100 = 1100/1100 = 1.0 or 100%
FZReal = 3200
(3700 - 3200)/1100 = 500/1100 = 0.45 or 45%

And such,
not everything has to be complicated =P
 

DrEvil

FCRI Associate!
Reaction score
111
oh yeah... i just realised that... the lowers numbers are the higher percentage xD

haha good job :)

'not everything has to be complicated =P'
It wasn't ...
 

BAkil

New Member
Reaction score
9
Sorry, I'm noob =(

IDK, I don't know how to use JASS or stuff so it scared me :(
 

roXplosive

New Member
Reaction score
15
You can choose any form of a function defined as f:[2600..3700]->[0..100] that satisfied the equalities : f(2600)=100 and f(3700)=100 . I imagine you are seeking a linear function since they are the simplest and they vary ... of course linearly . so f(x)=a*x+b and thus we have some equations :

2600*a+b=100
3700*a+b=0

Solving the equation system we get : a=-100/(3700-2600)=-100/1100 and b=-3700*a=3700*100/1100 .

so your function becomes : f(x)=100*(-x+3700)/1100

Of course some other simple variations include the function being a parabola or an ellipse arc . Hope this helps you fish (the saying : give the man a fish and you will feed him tonight but learn him to fish and you fed him forever )
 

R 3 T R O

New Member
Reaction score
12
Ok so this would work? but wouldn't i have to *100 for me to get a % number? instead of a dece for ex 0.45 cause i dont want it to display 0.45% i want 45%
Trigger:
  • Melee Initialization
    • Events
      • Map initialization
    • Conditions
    • Actions
      • Set FZReal = (Random real number between 2600.00 and 3700.00)
      • Set Caculations[1] = ((3700.00 - FZReal) / 1100.00)
      • Game - Display to (All players) the text: (There is + ((String(Caculations[1])) + % clouds covering the air.))
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Monovertex Monovertex:
    How are you all? :D
    +1
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though

      The Helper Discord

      Members online

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top