How to make a bridge that one can walk under?

scubazoo

Member
Reaction score
1
Hi,

How does one make a bridge that one can walk across as well as underneath. I have tried using long natural bridge, however the pathing is such that no units can walk underneath the bridge. I have tried replacing the pathing texture of this bridge to that of an elevator, but than units beneath the bridge will still be unable to walk underneath it, and will instead be sort of teleported up on top of it.
 

johnnymra

New Member
Reaction score
14
This problem is normal as the pathing cannot refer to more levels... you simply cannot make it so that unit would be able to move on a top level and also on a bottom level... they can walk only on one of them, over the bridge, or underneath it... but there may be a way to trigger something like walking on a bridge... with some slide effects, i don't know. I mean making a bridge with no pathing.. so you can walk underneath it.... and if you walk from the sides... the unit is sort of slided over the bridge...

I don't know for sure.
 

scubazoo

Member
Reaction score
1
Hmm. Seems like it might work. But I've seen it done, I think without triggering, on some battle for middle earth maps, a diablo 3 map, and a world of warcraft map.

Edit: I'm not sure how to do sliding, but with sliding wouldnt that mean you lose control of the unit as it is sliding across the bridge, and would be unable to stop in the middle of the bridge?
 

johnnymra

New Member
Reaction score
14
Could you give me the link of an exact map in which you saw this? I am really interested in this because i once wanted to do the same, and if it is possible (i doubt)... then i want to see how... maybe i will figure it out by seeing a map with this.
 

WolfieeifloW

WEHZ Helper
Reaction score
372
There's been loads of threads about this.
Use the search function.

The easiest way I believe anyone's come up with is just making a region on both sides, then transferring the unit from one region to the other when it tries to go underneath.
 

scubazoo

Member
Reaction score
1
I've tried searching, and everyone seems to have same problem. Although apparently there is a way to do it with the WEU. Anyone know of this way?

Or, im thinking it might be possible to make a trigger so that a unit is teleported directly underneath the bridge, as the pathing blockers are only on the sides and not underneath the middle of the bridge. Although as soon as they start walking, I have a feeling they will be teleported on top of the bridge.


Where are the admins?????
 

WolfieeifloW

WEHZ Helper
Reaction score
372
Did you read my response below the using the search part?
The easiest way I believe anyone's come up with is just making a region on both sides, then transferring the unit from one region to the other when it tries to go underneath.


And why are you asking for admins :p
 

scubazoo

Member
Reaction score
1
Yes, I read that. That defeats the purpose though. I would have it so that unit can stop on the bridge; this is much more authentic, and cool, not to mention interesting as well. A unit such as an archer may be on top of the bridge and shoot at units underneath it.


Edit: Would it be possible to make it so there is deep water under the bridge, and make units the ability to float and swim in water. Would they then be able to walk across the bridge, as well as pass underneath it? Im thinking this because the pathing underneath the bridge is such that ground units cannot pass. However, if you replace the ground underneath the bridge with water, wouldnt this remove the pathing of the bridge?
 

Dirac

22710180
Reaction score
147
The real problem about bridges is their collision. Whenever you move an unit a path is traced for the unit to follow, bridges always are obstacles in this path unless youre trying to go over them, if a unit were able to walk to a point ignoring ground physics this could be done, however it requieres very advance triggering, the unit should have flying type movement and a lot, a lot of flying path blockers in your map
 

scubazoo

Member
Reaction score
1
If i set unit's to flying in just a certain region, the region in which there is a bridge, then theyd be able to walk underneath it? I would set a trigger to remove their flying once they are out of the region. Would it still look as if they're walking as long as i set flight level to ground level?
 

Narks

Vastly intelligent whale-like being from the stars
Reaction score
90
you can add and remove the crow form ability to a ground unit, then you can set the flying height of it

you will still have issues with collision, however, as well as other things, like melee units below attacking units on the bridge
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top