Mana Drain Per Attack

Bogrim

y hello thar
Reaction score
154
@Bogrim, I have no idea what you're trying to say.
Cargo Hold is the ability that Burrows have to store units and enable their attack. But more importantly, adding this ability to a unit will disable its attack. You can modify Cargo Hold so that it cannot store any units, and therefore gain a way to disable a unit's attack without using any active abilities or buffs.

Monitor the unit's mana amount with a periodic trigger and when it's below the desired mana amount required for an attack, add Cargo Hold. When it's above the desired mana amount and has Cargo Hold, remove Cargo Hold.

After that, all you have to do is just drain mana whenever the unit attacks and you have your desired effect without any goofy auto-cast abilities. Really, every other solution posted in this thread is dumb compared to just using Cargo Hold.
 

jhnam95

Active Member
Reaction score
12
Even so, my problem isn't preventing it from attacking. The problem is with draining the mana when the attack is fired. The spellbook idea seems interesting though.
 

Bogrim

y hello thar
Reaction score
154
Even so, my problem isn't preventing it from attacking. The problem is with draining the mana when the attack is fired. The spellbook idea seems interesting though.
If that's the method you really want to go with, then just use Orb of Lightning and make it cast Searing Arrows. But really, really, really, really go with the trigger method.
 

Panda

New Member
Reaction score
3
What about giving the unit an orblike attack (poison for example) and give it the duration of say 0.25 seconds. Then have a trigger running every 0.25 seconds checking if a unit has a buff and then remove mana?

A little abstract maybe but it could work IMO.
 

Light Alkmst

New Member
Reaction score
20
there's some systems that check whenever a unit takes damage, check for the buff, remove the buff, and run the effect, so the poison could last 0.0 seconds and won't be seen. takes a bit of prep though, and could cause overhead. if you want a periodic check for buffed units, multiple attacks won't stack within the interval

aside: could you just create an ability based off of feedback set to burn whatever amount you want, and burn 0 damage per mana burnt?
 

Light Alkmst

New Member
Reaction score
20
in that case, running a periodic check won't tell you which unit applied it. AFAIK damage detection system is necessary
 

perkeyone

something clever
Reaction score
71
would it work to add searing arrow to a spell book, turn it on, then disable the spellbook?

EDIT sabar seems to have already had this idea, have you tried it out yet? im interested to know if itworks
 

Bogrim

y hello thar
Reaction score
154
No, as you can't order a unit to use any ability inside a spell book. In fact, Searing Arrows is a bad ability to begin with as it won't work against magic immune units.

Just remove the mana on the "a unit is attacked" event, it's stupid to do anything else.
 

jhnam95

Active Member
Reaction score
12
I won't have ANY magic immune units in the game anyway.
I don't like the "unit is attacked" or "unit begins casting an ability" events. They occur too early. GDD occurs too late D:
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Monovertex Monovertex:
    How are you all? :D
    +1
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top