My Ms paint got deleted somehow

a j j bones

New Member
Reaction score
3
or at least i cant find it anywhere, is there a site i can download a new one from or does someone know where i could find it on my comp? its not banywhere in accessories where it normally was.
 

ArmedCitizen

Kisses Cats
Reaction score
198
Go to start > search and type in paint. If it doesn't show up you don't have it.

Huh.. Not sure where you can download it. It might only be download-able if you are willing to pay for it.

If you really want it horribly bad, and you don't want to pay for it, you might have to reinstall your operating system. Or maybe you can explore the CD (If it came in one.) and see if paint is on it.

I'm not sure but reinstalling your OS sounds very drastic. Hmm.. I might have to research this some.

EDIT: Found this.

You could open your "control panel" click on "Add/Remove Programs" go to the "Windows Setup" tab. Once you get that far you can re-install Paint, you'll find it under "Accesories"

Might work for you. Also found this on same site.

You can simply follow these steps.........
-plug in your usb flash drive to any computer which is running
Windows Xp.
-go to My Computer > Local Disk C: > WINDOWS > system32 You will find a little icon with the name
"mspaint"
-simply use copy and paste technic to copy the file "mspaint from system32 and paste it to your usb drive.
-plug in your usb flash to your pc or notebook which has lost the ms paint software and again simply copy "mspaint" from your usb drive to your computer's "system32"
-you may creat shortcut from there to your desktop.
Good Luck

I don't know why you would use paint though. The GIMP is free and a much, much, much better image editing program. Here is a link to download it.
 

a j j bones

New Member
Reaction score
3
ok i did the first one but before it works i gotta restart my comp which i cant do right now so ill post if it worked next time i resart my comp

i have gimp i installed it along time ago but i never really tried using it, maybe i should just try that out

thanks :)
 

Rad

...
Reaction score
228
go to start > run > mspaint

Most Microsoft programs replace themselves when they get deleted (like Internet Explorer), but the shortcuts are another story

I had this problem with notepad before. I think I just downloaded it but I only looked for the shortcut. I didn't know about system32 or anything.

If the start > run does work, then you can make a shortcut by right-clicking on your desktop, new > shortcut, MANUALLY copy paste this as the shortcut (Don't hit browse) C:\WINDOWS\system32\mspaint.exe

Hit ok, type paint... etc... drag and drop it back into your start menu

If it did get deleted, you can download this copy from my website Here
( http://67.171.223.140/files/mspaint.exe )

Let me know when you download it so I can delete it.
 

enouwee

Non ex transverso sed deorsum
Reaction score
240
or at least i cant find it anywhere, is there a site i can download a new one from or does someone know where i could find it on my comp? its not banywhere in accessories where it normally was.

Did you merely move/delete the shortcut or the executable?

Official "recovery" procedure: use the control panel to reinstall MS Paint:

Start
> Settings
> Control Panel
> Add/Remove Programs
> Add/Remove Windows Components (in the left bar) [*]
> select "Accessories and Utilities" and click "Details..."
> select "Accessories" and click "Details..."
> check/uncheck "Paint" (to either uninstall it first and add it back using the same procedure)
> OK, OK, next, ...

If you had to uninstall it, restart at [*]. This doesn't involve downloading binaries from third parties, which may be incompatible or loaded with additional and unwanted "features".
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Monovertex Monovertex:
    How are you all? :D
    +1
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top