One problem with GDD(GUI Friendly Damage Detection)...

dragoniano

New Member
Reaction score
0
I made this ability:
Bleed (passive ability)
Gladiator Wild can cause his attacks deal stackable damage over time and slow as they impact the foe. Stacks up to 5 times. Lasts 15 seconds.
Level 1 - 3 damage per second and 5% slow.
Level 2 - 6 damage per second and 5% slow.
Level 3 - 9 damage per second and 5% slow.
Level 4 - 12 damage per second and 5% slow.
Exemple: At lvl 2, 1 attack cause 6 damege/sec and 5% slow, on 2 attacks cause 12 damage/sec and 10% slow, on 3 attacks cause 18 damage/sec and 15% slow, and continuous... (max 5 times)

But, when the unit cast a any AoE spell, all the targets get the effect of bleed strike. This effect should apply only in target of attack. How can i get only the attacked target?

NOTE: Bleed Strike(N) = Shadow Strike

Trigger:
  • Bleed
    • Events
      • Game - GDD_Event becomes Equal to 0.00
    • Conditions
      • (Level of Bleed for GDD_DamageSource) Greater than 0
    • Actions
      • Set TurkleCasterPosition = (Position of GDD_DamagedUnit)
      • Unit - Create 1 Dummy Unit (Custom Campaign) for (Owner of GDD_DamageSource) at TurkleCasterPosition facing Default building facing degrees
      • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
        • If - Conditions
          • Or - Any (Conditions) are true
            • Conditions
              • (GDD_DamagedUnit has buff Bleeding (5)) Equal to True
              • (GDD_DamagedUnit has buff Bleeding (4)) Equal to True
        • Then - Actions
          • Unit - Add Bleed Strike[5] to (Last created unit)
          • Unit - Set level of Bleed Strike[5] for (Last created unit) to (Level of Bleed for GDD_DamageSource)
        • Else - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • Or - Any (Conditions) are true
                • Conditions
                  • (GDD_DamagedUnit has buff Bleeding (3)) Equal to True
            • Then - Actions
              • Unit - Add Bleed Strike[4] to (Last created unit)
              • Unit - Set level of Bleed Strike[4] for (Last created unit) to (Level of Bleed for GDD_DamageSource)
            • Else - Actions
              • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
                • If - Conditions
                  • Or - Any (Conditions) are true
                    • Conditions
                      • (GDD_DamagedUnit has buff Bleeding (2)) Equal to True
                • Then - Actions
                  • Unit - Add Bleed Strike[3] to (Last created unit)
                  • Unit - Set level of Bleed Strike[3] for (Last created unit) to (Level of Bleed for GDD_DamageSource)
                • Else - Actions
                  • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
                    • If - Conditions
                      • Or - Any (Conditions) are true
                        • Conditions
                          • (GDD_DamagedUnit has buff Bleeding (1)) Equal to True
                    • Then - Actions
                      • Unit - Add Bleed Strike[2] to (Last created unit)
                      • Unit - Set level of Bleed Strike[2] for (Last created unit) to (Level of Bleed for GDD_DamageSource)
                    • Else - Actions
                      • Unit - Add Bleed Strike[1] to (Last created unit)
                      • Unit - Set level of Bleed Strike[1] for (Last created unit) to (Level of Bleed for GDD_DamageSource)
      • Unit - Order (Last created unit) to Night Elf Warden - Shadow Strike GDD_DamagedUnit
      • Unit - Add a 0.50 second Generic expiration timer to (Last created unit)
      • Custom script: call RemoveLocation (udg_TurkleCasterPosition)
 

Dirac

22710180
Reaction score
147
Add an orb effect to your unit that applies a debuff to enemies it attack (ignite should work fine) then add condition to your trigger checking if the damaged unit has the debuff
 

dragoniano

New Member
Reaction score
0
Hmm, i'm trying use a orb of slow with ability bleed, but continues have a effect in AoE...so, how can function this? I have to add two debuffs on the target?
 

dragoniano

New Member
Reaction score
0
Add a different skill with buff for the orb and use my poisons with others buffs to trigger???
This don't help much, the trigger is working and if i put this ability in a orb, will lose the first stack probably...and dont see how you can use this trigger on with a orb...and the ability became a orb effect, which is not so good.
 

Dirac

22710180
Reaction score
147
The current way dosn't work for you anyways, it wont stack. This ability needs major revision
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +1
  • V-SNES V-SNES:
    Happy Friday!
    +1

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top