Port Forwarding isn't working.

[RedRage]

I've opened ports 6112-6115 TCP through my firewall, and i've set it up on my router and i still cannt host. Any suggestions?
I tryed with both tcp and udp now and it still doesn't work.

 

[Blackveiled]

I've opened ports 6112-6115 TCP through my firewall, and i've set it up on my router and i still cannt host. Any suggestions?

Turn off the firewall, thats what I do. I also had to setup a static ip address.

Also, before you turn the firewall off, set it up 6112-6119 TCP and UDP

 

[Ghan]

Tried reading this? http://www.thehelper.net/forums/showthread.php?t=127884

See what that can do for you and then come back and tell us what you tried.

 

[RedRage]

i did try, it did nothin, so i found another guide.

And when i set-up a static ip my internet stops working.

 

[Ghan]

> i did try

How very descriptive.

Let's start with a few* questions.

1. What is your IP Address when you do not use a Static IP?
2. What is the Subnet Mask?
3. What hardware do you have? (Router, modem, etc.)
4. How is your hardware configured? (What connects to what?)
5. What, exactly, have you tried?


*You wish

 

[DDRtists]

i did try, it did nothin, so i found another guide.

And when i set-up a static ip my internet stops working.

Then you have your settings wrong, because it will work if you enter the correct data. Turn on Dynamic and open Command Prompt and type "ipconfig /all" and it will give you all the needed data to enter to make it static.

 

[RedRage]

When i type ipconfig /all
it doesn't show my dns..
Any help?

 

[RedRage]

thxs for the help guys but i figured out the problem lol. For some reason when i tried to set-up the static IP it didn't work so i disabled it and it automatically changed my ip, i entered that in for the ports 6112-6115, and tada it works.