Your WoW Char

Husky

Local Lurker
Reaction score
120
That is only plausable if the warrior has better gear. I remember the 3 v 3 arena tourny blizz had a while back which I was in. Everyone all had season 2 gear and were all balanced by gear but me as an orc lock defeated 100% of all warriors in duels and I literally dueled hundreds. Arenas were easy too. I 2v2ed with my bro for practice and a warrior could never take me down. (My bro was a warrior himself)

And with balanced gear, the only true class as u said is a rogue. If the rogue is speced to kill spellcasters, than a warlock will find himself silenced and interupted to death unless he uses cooldowns and dots accordingly.

Beserker Rage <--- you're pretty much done right there.
Pummel
Charge + Intercept Charge
Mace Stun

GG Warlock. All the warriors you were fighting must of been pretty damn horrid.

And don't get me started on rogues.
 

Battlemapsta

I am the Conduit of Change
Reaction score
101
While your strategy is good, an orc warlock can easily destroy a warrior with his neato stun resistance and if he had more stun resistance from gems or gear, a warrior stun chance would be rendered almost useless.

If we had equal characters on skullcrusher, then we'd see who'd win :p
I am starting to hate the fact that I chose blood elf for my lock. I now wish he was an orc :(
 

Cornface

Avoid, if at all possible.
Reaction score
112
While your strategy is good, an orc warlock can easily destroy a warrior with his neato stun resistance and if he had more stun resistance from gems or gear, a warrior stun chance would be rendered almost useless.

This is some kind of joke, correct? If I am not right, the stun res of an orc with the stun res meta gem would be 20 %. Think about it, it is not that much really, there is a much higher chance that you actually succeed stunning the warlock. And even if you would fail, you can hamstring spam him, and we will be completely unable to escape from you.
 

Battlemapsta

I am the Conduit of Change
Reaction score
101
Thats why u don't run away as a lock and dot and drain life. Make the warrior lose hp while u simply gain it quickly. And if he used a hs or potion, it would've been a lot harder for the warrior to kill him.
 

Ghostwind

o________o
Reaction score
172
For my Warlock who is a gnome, I spec'd destruction to deal with heroes with lots of hp like warriors and feral druids. Basically all you need to do is keep them away from you. I tend to initiate with a shadowfury, then dot them up, use death coil, and fear whenever the duration runs out. If they get a stun on me I get my succubus to seduce them, if they get a slow on me I use escape artist. But usually since the shadow bolts do around 3k when they crit, I can take out a warrior in 4 or 5 of them.
 

Cornface

Avoid, if at all possible.
Reaction score
112
Thats why u don't run away as a lock and dot and drain life. Make the warrior lose hp while u simply gain it quickly. And if he used a hs or potion, it would've been a lot harder for the warrior to kill him.

So what you are saying is that the warlock drains more hp than the warriors damage? And they drain about 500 per 3 sec with siphon life and drain life.
 

Battlemapsta

I am the Conduit of Change
Reaction score
101
It all depends on if u're good as a lock. I, using a succy can take extremely small damage from a warrior because I keep healing myself along with dealing good damage to the warrior. And if my succy dies, I can summon her back in like 1 second so it doesn't matter. By then, either the warrior would be dead or have lost the duel.

I literally (And no, I'm not trying to intimidate or show off) never lost to a warrior 1 on 1 with equal gear. The only ones who were able to kill me are rogues but rarely. As for other locks though, it's easy but because most locks hate facing other locks, I have only won 100% of about 6 matches so I'm not impressed or going to state that I can kill any lock.
 

Cornface

Avoid, if at all possible.
Reaction score
112
It all depends on if u're good as a lock. I, using a succy can take extremely small damage from a warrior because I keep healing myself along with dealing good damage to the warrior. And if my succy dies, I can summon her back in like 1 second so it doesn't matter. By then, either the warrior would be dead or have lost the duel.

Are you talking duel here, in that case it is another piece of a cake since the warrior doesn't usually blow his cooldowns here, and you can make your choice of pet with no problem. But it the arena, that is a different story.
 

Battlemapsta

I am the Conduit of Change
Reaction score
101
Less than half are duels because it's rare to be a lock in a 2 v 2 arena and have a chance to go 1 on 1 with a warrior. But either way, I simply use succy and don't run away to drain his life and basically win.
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Monovertex Monovertex:
    How are you all? :D
    +1
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top