Death Knight spells, a few questions.

Anderzzon

Active Member
Reaction score
4
Hi thar! I'm making a sort of RPG or AoS style map (depends on what game mode the host choses) and I've made quite a few heroes now and the most complicated by far is the Death Knight and I now have a few questions.

First of here's the info about the hero (I want some opinions on the theme):

Editors note: Since I hate DK's in both WCIII and WoW I've made him very WCII like (imported the soundset, which is the most imbah soundset EVER) and made him a caster. Anyways here goes:

Description:

The Death Knights, sent here to deliver death's will. Stand before them and you'll soon feel their darkness pulling you further and further away from the warmth of the living. To gaze upon such a dark entity is to stare right into abyss. Yet, before them, before the greatest of evil, there was Lord Teron Gorefiend. Most powerful of them all. He is said to be the ruler of the dead, master of the damned. Entire armies has been seen dragging themselves to their feet again in just the bare presence of this Lord, the darkest of dark. He is darkness incarnated, he is the end of the world of the living.

Learns:
Death Coil
Soul Rip
Necromantic Summoning
Descecration

Agility 18 + 1.5/lvl
Intelligence - 30 + 3.5/lvl
Strength 19 + 1.5/lvl

All heroes on my map each have a class specific that they start with, these are almost always passive and when they aren't they are heavly based on triggers to make them scale with the progression of the hero.

Unholy Aura

Spells targeted at units under the effect of Unholy Aura will have additional effects.

Soul Rip: The target will stunned for .75 seconds.

Death Coil: The Death Coil will heal the Death Knight for half of the damage/healing done.

Necromantic Summoning: Healing a Skeletal Mage under the ecceft of Unholy Aura with Death Coil will cause them to deal additional spell damage for 5 seconds.

Abilities:

Death Coil:

Teron calls forth a coil of death that can damage an enemy unit or heal a friendly unit, deals damage equal to an amount half of what the spell heals + Teron's Intellect times 1.

Unholy Aura: The Death Knight is healed to an amount equal to half of what the Death Coil damaged/healed if the target is under the affect of Unholy Aura.

Level 1 - Heals for 200 hit points.
Level 2 - Heals for 400 hit points.
Level 3 - Heals for 600 hit points.

Soul Rip:

The Death Knight rips the soul of the target, dealing damage to it and healing himself. The spell is enhanced by an amount equal to 2 times the Death Knights intelligence.

Unholy Aura: The target of the rip will be stunned for .75 seconds.

Level 1 - 100 damage/heal
Level 2 - 150 damage/heal
Level 3 - 200 damage/heal

Necromantic Summoning:

Summons a skeletal mage which has the ability to raise dead soldiers, and cast Ebon Plague which deals inital damage and then damage over time, slows the target for the durotation. The Mage is uncontrollable but will follow Teron and protect him, when the Death Knight casts a spell on a enemy target the Skeletal Mage will cast his Ebon Plague on that target, the Plague has a 7 seconds cooldown.

Unholy Aura: Healing the Skeletal Mage when he is under the effect of Unholy Aura with Death Coil will cause him to deal additional damage with his Ebon Plague spell for 5 seconds. The additional damage is based on the Death Knights intelligence times the level of Necromantic Summoning.

Level 1 - Weak Skeletal Mage
Level 2 - Modrate Skeletal Mage
Level 3 - Poweful Skeletal Mage

I am still working on his ultimate, it will be a sort of AoE based on Flame Stirke and all units who die within the area will be raised as Skeletal Mages, this will have a massive Cooldown considering if the DK is skilled with it he might get about 10 skeletal mages who will all cast Ebon Plague which will pretty much one-shot everything...

Anywho, what I'm wondering now is if Shadow Strike spells overwrite eachother? Since I have another spell based on Shadow Strike and the Ebon Plague will also be based on it so I'm wondering if an enemy will be able to have them both on? Yes, I have different custom made buffs for the spells and all that ofc but one never knows.

Anyways leave opinions on the hero and please get back to me about the buffs. :)

/Anderzzon

==================

EDIT: Typos...
 

Accname

2D-Graphics enthusiast
Reaction score
1,463
well, the skills are almost the basic vanilla skills but a little polished, still simple doesnt need to be bad.

this hero got alot of "heal yourself" skills i believe he would be hard to kill, he got to have little str and armor i suppose.

if the unholy aura is like a regular aura all the conditions for whether a unit is under the effect of the aura or not are almost useless.
the skeletal mage (as it follows the hero as you said) will most likely always be in range for the aura, same goes for the most targets of your spells because the casting range cannot be that big i guess.


to your question, ALL buffs of ALL skills overwrite each other.
you cannot have 2 abilities based on the same skill apply different buffs to the target.
the only exeptions to this are auras.
 

DuelPlayer

Member
Reaction score
21
Why everyone started to make threads that ask for opinions after someone (trying not to be so direct) started it....
 

Anderzzon

Active Member
Reaction score
4
to your question, ALL buffs of ALL skills overwrite each other.
you cannot have 2 abilities based on the same skill apply different buffs to the target.
the only exeptions to this are auras.

Figures, oww well that'll have to do. Thanks for the feedback and the expertise.

/Anderzzon
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1
  • The Helper The Helper:
    New recipe is another summer dessert Berry and Peach Cheesecake - https://www.thehelper.net/threads/recipe-berry-and-peach-cheesecake.194169/

      The Helper Discord

      Staff online

      Members online

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top