Issue Order on a Cliff

junicobakura

Member
Reaction score
3
Apparently , when you try to make a Dummy(Caster) to cast a Point Spell on a Cliff , or at least within a small range of a cliff , it wouldn't cast the spell at all.

is there anyway to fix this?
 

Solu9

You can change this now in User CP.
Reaction score
216
Can you be more specific on which ability you are trying to cast? It might have something to do with line of sight or the dummy unit's sight radius.
 

Juggernaut

I don't know what to change it to
Reaction score
33
can the dummy reach the point? maybe the cast range is low and the dummy can't reach it.
 

junicobakura

Member
Reaction score
3
It's a Stampede based ability

Cast Range is 9999.

and by Point on the Cliff , i meant somewhere at the Edge of the Cliff
 

keychup

Active Member
Reaction score
34
I ran into this same problem a long time ago.

My solution was to create the flying dummy unit at my position and a ground dummy unit at the target point.

The game automatically positions the ground dummy unit to a walkable path.

Then i set the position of the ground dummy unit as the new casting point for the flying dummy unit.

This way the flying dummy unit can cast at a walkable point of the field.

I also have another solution where i create a flying dummy unit behind the hero. The flying dummy unit will cast its spell on the position of the casting hero. This also works.

The problem usually arises with the spells Shockwave, Carrion Swarm, and Stampede
 

keychup

Active Member
Reaction score
34
I ran into this same problem a long time ago.

My solution was to create the flying dummy unit at my position and a ground dummy unit at the target point.

The game automatically positions the ground dummy unit to a walkable path.

Then i set the position of the ground dummy unit as the new casting point for the flying dummy unit.

This way the flying dummy unit can cast at a walkable point of the field.

I also have another solution where i create a flying dummy unit behind the hero. The flying dummy unit will cast its spell on the position of the casting hero. This also works.

The problem usually arises with the spells Impale, Shockwave, Carrion Swarm, and Stampede
 

junicobakura

Member
Reaction score
3
Code:
Gatling Start
    Events
        Unit - A unit Starts the effect of an ability
    Conditions
        (Ability being cast) Equal to Gomu Gomu:Gatling Gun 
    Actions
        Custom script:   local real x
        Custom script:   local real y
        Animation - Change (Triggering unit)'s animation speed to 500.00% of its original speed
        Set TempLoc = (Position of (Triggering unit))
        Set TempLoc2 = (Target point of ability being cast)
        Set TempLoc3 = (TempLoc offset by 10.00 towards (Angle from TempLoc to TempLoc2) degrees)
        Set TempLoc4 = (TempLoc offset by 500.00 towards (Angle from TempLoc to TempLoc2) degrees)
        Custom script:   set x = GetLocationX(udg_TempLoc4)
        Custom script:   set y = GetLocationY(udg_TempLoc4)
        Unit - Create 1 Dummy Caster for (Owner of (Triggering unit)) at TempLoc facing TempLoc4
        Custom script:   call SaveUnitHandle(udg_GomuGomuGatlingGunHashtable, GetHandleId(GetLastCreatedUnit()), StringHash("master"), GetTriggerUnit())
        Custom script:   call SaveUnitHandle(udg_GomuGomuGatlingGunHashtable, GetHandleId(GetTriggerUnit()), StringHash("pawn"), GetLastCreatedUnit())
        Unit - Add a 6.00 second Generic expiration timer to (Last created unit)
        Unit - Make (Last created unit) Explode on death
        Unit - Add Gomu Gomu:Gatling Gun(Stampede)  to (Last created unit)
        Unit - Set level of Gomu Gomu:Gatling Gun(Stampede)  for (Last created unit) to (Level of Gomu Gomu:Gatling Gun  for (Triggering unit))
        Unit - Order (Last created unit) to Neutral Beastmaster - Stampede TempLoc3
        Custom script:   call SetUnitX(GetLastCreatedUnit(), x)
        Custom script:   call SetUnitY(GetLastCreatedUnit(), y)
        Custom script:   call RemoveLocation(udg_TempLoc)
        Custom script:   call RemoveLocation(udg_TempLoc2)
        Custom script:   call RemoveLocation(udg_TempLoc3)
        Custom script:   call RemoveLocation(udg_TempLoc4)

tried this and works properly :D
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Monovertex Monovertex:
    How are you all? :D
    +1
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top