My Map & Jass

Rainther

I guess I should write something of value here...
Reaction score
61
If Ladder Lock is beneath the wall and Unit Tele is on the wall, then yes.
 

BlackDeath09

New Member
Reaction score
9
yeah, what i did is, ladder lock region is right outside the wall not to far to make it look like its attached to the wall then i made the tele region right on the wall. i was just wondering if i needed another region to signify where they are teleporting from but i guess thats the ladder in the trigger.

edit: wait dont i need an intial trigger or something for all the ladders overall i thought there was something like that that needed to be made
 

BlackDeath09

New Member
Reaction score
9
Edit: a list of my questions

how many regions do i have to have wtf? wall blocker 1a ladder 1b? load spot 1a i have no idea what all this stuff is so im just putting the same thing for all of them ladder1 lock <gen>.....

Okay i play tested it just now, i did the triggers except without the above ^^^^ because i dont have any regions named that or anything. anyways....
The map didnt even require me to have a ladder up in the spot and still teleported the units up when they entered a completey different spot. fyi i only did 1 trigger so that mistake should only work on the 1 location but it was doing it on all of them. here is the map see what you can do... cant post here ill have to double post
 

Rainther

I guess I should write something of value here...
Reaction score
61
Press on the Ladder# tp triggers and chose Initially Turned Off

They will be turned on by the other trigger (Ladder# lock)
 

BlackDeath09

New Member
Reaction score
9
and thats all thats needed no pathing blockers no other regions just the two regions the three triggers and thats it, well thanks a lot ill let you know if i have any more problems :)
 

BlackDeath09

New Member
Reaction score
9
still encoutering a couple problems. first it works now there is no teleporting without first putting a ladder there but thats where the problem starts. the ladder teleports up then pauses in place instead of just pausing on the ladder lock zone. then units tele in the right spot but obviously the ladder is no longer there and lastly when the ladder dies the units can still tele up.
 

Rainther

I guess I should write something of value here...
Reaction score
61
The Ladder# tp trigger has the condition of there entering unit to not be a light siege tower, add it to not be a heavy siege tower too in that condition. And the last trigger (Ladder# dies) doesn't work since the ladder didn't die in that region.
 

BlackDeath09

New Member
Reaction score
9
Trigger:
  • Events
    • Unit - A unit enters Siege Tower1 Lock &lt;gen&gt;


Trigger:
  • Conditions
    • (Unit-type of (Triggering unit)) Not equal to Siege Tower


Trigger:
  • Actions
    • Unit - Move (Entering unit) instantly to (Center of Siege Tower1 Tele &lt;gen&gt;)


that is what my siege tower tele 1 looks like here is the map with the rest of the triggers, and you can check the regions.
View attachment 31969
sitl have same problem, you can also check the name of units but its just the 1 name.
 

Rainther

I guess I should write something of value here...
Reaction score
61
From what I've gotten you got 2 siege units. Both need to be added to the Condition in order to not teleport them.
 

Rainther

I guess I should write something of value here...
Reaction score
61
Light Siege Tower and Heavy Siege Tower, if I'm not mistaken. Maybe you should add catapults too.
 

Rainther

I guess I should write something of value here...
Reaction score
61
That's up to you, just add all the special units you don't want teleported to the condition Ladder# tp, most of all the different Siege Units.
 

Rainther

I guess I should write something of value here...
Reaction score
61
Trigger:
  • Unit - Move (Triggering unit) instantly to (Center of Siege Tower1 Lock &lt;gen&gt;), facing 90.00 degrees

You had "Siege Tower1 Tele" that's where the other entering units are supposed to go.

Change this in Siege Tower1 Lock

And...

Trigger:
  • Siege Tower1 Tele
    • Events
      • Unit - A unit enters Siege Tower1 Lock &lt;gen&gt;
    • Conditions
      • (Unit-type of (Entering unit)) Not equal to Siege Tower
      • (Unit-type of (Entering unit)) Not equal to Morder Catapult
      • (Unit-type of (Entering unit)) Not equal to Minas Tirith Trebuchet
      • (Unit-type of (Entering unit)) Not equal to Oliphaunt
      • (Unit-type of (Entering unit)) Not equal to Morder Battering Ram (Riderless)
      • (Unit-type of (Entering unit)) Not equal to Morder Battering Ram
    • Actions
      • Unit - Move (Entering unit) instantly to (Center of Siege Tower1 Tele &lt;gen&gt;)


Change the conditions to Entering Unit and not Triggering Unit, it works for me
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1

      The Helper Discord

      Staff online

      Members online

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top