Mystic Snake (SPELL) Need Help!!

E

emobroken22

Member
Reaction score
3
So..i made a gui version of mystic snake..and i found problems when using it on game, when the mystic snake reaches its target it will correctly bounce to other units, after its last bounce, it will bounce back again to the units it bounced on before. But this time, it will not stop bouncing on the unit until its dead. Afterwards, it will go to the middle section of the map and do nothin. Help!! i need this in my map!!

Trigger:
  • Mystic Snake
    • Events
      • Unit - A unit Starts the effect of an ability
    • Conditions
      • (Ability being cast) Equal to Mystic Snake
    • Actions
      • Set MS_Counts = (MS_Counts + 1)
      • Set MS_Caster[MS_Counts] = (Casting unit)
      • Set MS_Target[MS_Counts] = (Target unit of ability being cast)
      • Set MS_BaseDmg[MS_Counts] = ((1.75 + (0.50 x (Real((Level of Mystic Snake for (Casting unit)))))) x (Real((Agility of (Casting unit) (Include bonuses)))))
      • Set MS_BaseMana[MS_Counts] = (10.00 + ((Real((Level of Mystic Snake for (Casting unit)))) x 10.00))
      • Set MS_Manastolen[MS_Counts] = 0.00
      • Set MS_MaxBounce[MS_Counts] = (2 + (1 x (Level of Mystic Snake for (Casting unit))))
      • Unit Group - Add (Target unit of ability being cast) to MS_Targets[MS_Counts]
      • Unit - Create 1 Snake Dummy for (Owner of (Casting unit)) at (Position of (Casting unit)) facing Default building facing degrees
      • Unit - Set the custom value of (Last created unit) to MS_Counts
      • Unit Group - Add (Last created unit) to MS_SpellGroup
      • Set MS_Dummy[MS_Counts] = (Last created unit)
      • Trigger - Turn on Mystic Move <gen>


Trigger:
  • Mystic Move
    • Events
      • Time - Every 0.04 seconds of game time
    • Conditions
    • Actions
      • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
        • If - Conditions
          • And - All (Conditions) are true
            • Conditions
              • (Number of units in MS_ReturnGroup) Equal to 0
              • (Number of units in MS_SpellGroup) Equal to 0
        • Then - Actions
          • Trigger - Turn off (This trigger)
        • Else - Actions
      • Unit Group - Pick every unit in MS_SpellGroup and do (Actions)
        • Loop - Actions
          • Set MS_CusVal = (Custom value of (Picked unit))
          • Set MS_Angle = (Angle from (Position of (Picked unit)) to (Position of MS_Target[MS_CusVal]))
          • Set MS_Movement = ((Position of (Picked unit)) offset by 23.00 towards MS_Angle degrees)
          • Unit - Move (Picked unit) instantly to MS_Movement, facing MS_Angle degrees
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Distance between (Position of (Picked unit)) and (Position of MS_Target[MS_CusVal])) Less than or equal to 30.00
            • Then - Actions
              • Set MS_Bounces[MS_CusVal] = (MS_Bounces[MS_CusVal] + 1)
              • Special Effect - Create a special effect attached to the chest of MS_Target[MS_CusVal] using Abilities\Spells\Undead\AbsorbMana\AbsorbManaBirthMissile.mdl
              • Special Effect - Destroy (Last created special effect)
              • Unit - Cause MS_Caster[MS_CusVal] to damage MS_Target[MS_CusVal], dealing MS_BaseDmg[MS_CusVal] damage of attack type Spells and damage type Normal
              • Set MS_TempReal = (Mana of MS_Target[MS_CusVal])
              • Unit - Set mana of MS_Target[MS_CusVal] to ((Mana of MS_Target[MS_CusVal]) - MS_BaseMana[MS_CusVal])
              • Set MS_Manastolen[MS_CusVal] = (MS_Manastolen[MS_CusVal] + (MS_TempReal - (Mana of MS_Target[MS_CusVal])))
              • Set MS_BaseDmg[MS_CusVal] = (MS_BaseDmg[MS_CusVal] x 1.20)
              • Set MS_BaseMana[MS_CusVal] = (MS_BaseMana[MS_CusVal] x 1.20)
              • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
                • If - Conditions
                  • Or - Any (Conditions) are true
                    • Conditions
                      • MS_Bounces[MS_CusVal] Not equal to MS_MaxBounce[MS_CusVal]
                      • (Number of units in (Units within 475.00 of (Position of MS_Target[MS_CusVal]) matching ((((Matching unit) is A structure) Not equal to True) and ((((Matching unit) is Mechanical) Not equal to True) and ((((Matching unit) is Magic Immune) Not equal to True) a Equal to 0
                • Then - Actions
                  • Set MS_TempGroup = (Units within 475.00 of (Position of MS_Target[MS_CusVal]) matching (((((Matching unit) is A structure) Not equal to True) and (((Matching unit) is in MS_Targets[MS_CusVal]) Not equal to True)) and ((((Matching unit) is Mechanical) Not equal to True) and ((((
                  • Set MS_TempReal = 475.00
                  • Unit Group - Pick every unit in MS_TempGroup and do (Actions)
                    • Loop - Actions
                      • Set MS_TempReal2 = (Distance between (Position of MS_Target[MS_CusVal]) and (Position of (Picked unit)))
                      • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
                        • If - Conditions
                          • MS_TempReal2 Less than MS_TempReal
                        • Then - Actions
                          • Set MS_TempReal = MS_TempReal2
                          • Set MS_Target[MS_CusVal] = (Picked unit)
                          • Unit Group - Add MS_Target[MS_CusVal] to MS_Targets[MS_CusVal]
                        • Else - Actions
                  • Custom script: call DestroyGroup(udg_MS_TempGroup)
                • Else - Actions
                  • Unit Group - Remove (Picked unit) from MS_SpellGroup
                  • Unit Group - Add (Picked unit) to MS_ReturnGroup
              • Custom script: call RemoveLocation(udg_MS_Movement)
            • Else - Actions
      • Unit Group - Pick every unit in MS_ReturnGroup and do (Actions)
        • Loop - Actions
          • Set MS_CusVal2 = (Custom value of (Picked unit))
          • Set MS_Angle = (Angle from (Position of (Picked unit)) to (Position of MS_Caster[MS_CusVal2]))
          • Set MS_Speed = (MS_Speed + 1.50)
          • Set MS_Movement = ((Position of (Picked unit)) offset by (-23.00 - MS_Speed) towards MS_Angle degrees)
          • Unit - Move (Picked unit) instantly to MS_Movement, facing MS_Angle degrees
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Distance between (Position of (Picked unit)) and (Position of MS_Caster[MS_CusVal2])) Less than or equal to 30.00
            • Then - Actions
              • Special Effect - Create a special effect attached to the chest of MS_Caster[MS_CusVal2] using Abilities\Spells\Undead\AbsorbMana\AbsorbManaBirthMissile.mdl
              • Unit - Set mana of MS_Caster[MS_CusVal2] to ((Mana of MS_Caster[MS_CusVal2]) + MS_Manastolen[MS_CusVal2])
              • Special Effect - Destroy (Last created special effect)
              • Unit - Kill (Picked unit)
              • Unit - Remove (Picked unit) from the game
              • Unit Group - Remove (Picked unit) from MS_ReturnGroup
              • Custom script: call DestroyGroup(udg_MS_Targets[udg_MS_CusVal2])
            • Else - Actions
          • Custom script: call RemoveLocation(udg_MS_Movement)
 
You must log in or register to reply here.
General chit-chat
Help Users
  • No one is chatting at the moment.
  • The Helper The Helper:
    Here is a cool dessert recipe I found https://www.thehelper.net/threads/recipe-cherry-cheesecake-brownie.194048/
  • The Helper The Helper:
    Found a cool easy Chicken Pot Pie recipe! https://www.thehelper.net/threads/recipe-chicken-pot-pie.194064/
  • Monovertex Monovertex:
    How are you all? :D
     +1
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
     +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
     +1
  • The Helper The Helper:
    Here is a great appetizer recipe Texas style! https://www.thehelper.net/threads/recipe-chicken-stuffed-poblano-peppers.194086/
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
     +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    New dessert for Summer - https://www.thehelper.net/threads/recipe-lemon-blueberry-layer-cheesecake.194113/
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
     +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though

      The Helper Discord

      Staff online

      Members online

      Online now:
      61 (members: 1, guests: 60)

      Share this page

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top