Problem with spell that only works with another spell

dudeim

New Member
Reaction score
22
Heej all,

I got 2 spells one a plain and simple windwalk that lasts forever until you attack etc..
the other spell is a spell based of storm bolt with a .5 sec duration.
The spells are meant to combine so if you use the windwalk you'll get the other spell "sinister strike". That works.. but then when you use Sinister Strike it deals 4 times your agi in dmg, but you need the buff of wind walk to deal the damage (cus else you can use it without the buff). And that exactly where it stops working the buff dissepears before the trigger comes with the checking of the buff part.
Trigger giving the Sinister Strike to unit when Wind walk (Walk of the Shadows) is used
Trigger:
  • Events
    • Unit - A unit Starts the effect of an ability
    • Conditions
    • (Ability being cast) Equal to Walk of the Shadows
    • Actions
    • Unit - Add Sinister Strike to (Triggering unit)

the damag trigger
Trigger:
  • Events
    • Unit - A unit Starts the effect of an ability
    • Condtions
    • (Ability being cast) Equal to Sinister Strike
    • Actions
    • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
      • If - Conditions
        • ((Triggering unit) has buff Walk of the Shadows) Equal to True
      • Then - Actions
        • Unit - Cause (Triggering unit) to damage (Target unit of ability being cast), dealing (4.00 x (Real((Agility of (Triggering unit) (Include bonuses))))) damage of attack type Spells and damage type Unknown
        • Quest - Display to (All players) the Quest Update message: yep
        • Unit - Remove (Ability being cast) from (Triggering unit)
      • Else - Actions
        • Quest - Display to (All players) the Quest Update message: nop
        • Unit - Remove (Ability being cast) from (Triggering unit)

The messages are there for testing and it always says "nop" cus the buff is dispeld before the trigger fires:(
So what could I do to fix it?

Thnx
Rep +:thup:
 

Gtam

Lerning how to write and read!! Yeah.
Reaction score
164
Check for the buf in the conditions and not in the if then else
 

dudeim

New Member
Reaction score
22
That also doesn't work the trigger began that way
Edit: is there any way i can detect if wind walk is stopped (when the hero cast a spell or attacks a unit when he is in wind walk is that possible?) that way i could probably fix the trigger to
 

vypur85

Hibernate
Reaction score
803
Why would you need to check for the buff when the second ability is only available when you cast Windwalk?

Code:
Events
 Unit - A unit Starts the effect of an ability
Condtions
 (Ability being cast) Equal to Sinister Strike 
Actions
 Unit - Cause (Triggering unit) to damage (Target unit of ability being cast), dealing (4.00 x (Real((Agility of (Triggering unit) (Include bonuses))))) damage of attack type Spells and damage type Unknown
 Unit - Remove (Ability being cast) from (Triggering unit)
 

dudeim

New Member
Reaction score
22
Well cus if you attack you break wind walk but i can't seem to find a way to remove the abillity then... so if i could find a solution to that it would also help. Didn't think about it earlier
 

vypur85

Hibernate
Reaction score
803
Then your real problem would be to remove the ability whenever the buff is gone.

Not sure if this works as you want:
Code:
Event
 A unit is attacked
Condition
 Level of Sinister Strike for (Attacking unit) Greater than 0
Actions
 Unit - Remove Sinister Strike from (Attacking unit)

Code:
Event
 A unit dies
Condition
 Level of Sinister Strike for (Triggering unit) Greater than 0
Actions
 Unit - Remove Sinister Strike from (Triggering unit)

Generally, if the unit has the Sinister Strike ability, this means the unit is in Windwalk and it can't attack because if it does, it will break Windwalk. So just check if the unit has the Sinister Strike ability or not (which is only available upon casting of Windwalk), and remove it if the unit attacks. Same goes for the dead trigger.
 

Galdiuz

Creator of Photon Command
Reaction score
98
That should be attacking/killing unit, not triggering unit, or else it won't work.
 

dudeim

New Member
Reaction score
22
Why didn't I think of that:p well thanx man just some simple adjustment to make it fit in my map and it works properly:D rep+:thup:

@Galdiuz
nop he makes it if the Hero that has Sinister Strike dies that the skill is removed :p
 

mr-death

Acolyte
Reaction score
51
My suggestions; use a dummy unit to add another buff when the unit goes windwalking.

change the condition to 'that buff' instead of walk of shadows.
and, remove 'that buff' right before you say 'yep' or 'nop'.
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1

      The Helper Discord

      Staff online

      Members online

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top